Leatherman SIDEKICK / WINGMAN Owners Club
-
Thanks guys

-
@Zephon said:
Would a Wingman be able to take in the plier head of a wave/charge v1?Only problem I see is that the holes for the barrel screws are the same on both ends of the Wingman/SideKick platform but the Wave/Charge ones are larger on the plier head end than the other end
Might fill the plier head holes in with a softer metal and then redrill them to have a smaller diameter hole that would take the screws of the Wingman without a wobble 
-
-

I have no idea how this happened while I was opening the tool.

-
@Poncho65 said:
Only problem I see is that the holes for the barrel screws are the same on both ends of the Wingman/SideKick platform but the Wave/Charge ones are larger on the plier head end than the other end
Might fill the plier head holes in with a softer metal and then redrill them to have a smaller diameter hole that would take the screws of the Wingman without a wobble 
Thanks for the words of caution. All the while I thought it was just a drop-in.
-
-
-
This was a good platform and it's sad Leatherman went in the opposite direction cutting and removing features(Rev/Bolster) when if they would have expanded on this platform they could have something really fantastic for EDC.
-
@Poncho65 said:
:ahhh :ahhh :ahhhNo idea either ??? :ahhh Guess you have to take it apart to fix that? :o
Managed to untangle it without disassembly. Surprisingly the key was something like an odd angle of the opposite plier pivot- not the stuck one. I swear it was crazy! Good thing it happened at home and not in the field.
-
Glad you were able to fix it

-
Fresh off the table. I haven’t even had the chance to wipe clean the tools I used.
How I wish I can come across a plier head that I can simply drop into the Wingman.
Anyway, the mod here isn’t 100% perfect. A <1mm portion of the tip of the bit holder comes in contact with <1mm of the plier tip.
I think this gives extra value to the Wingman. Yeah, it adds a little extra cost since I bought the bit holder separately. Wish I had an awl to add on to this. I honestly don’t have the tools to grind something into an awl.
I’m doing the Rebar challenge now so I can’t comment on how this tool holds up. I’ll probably give feedback next month.
Edit: as it is, all in all, this Wingman with bit driver still costs half of what a Curl costs down here. And all I’m missing is an awl….
Edit 2: I can easily replace the PE blade with the saw and now I’ll have a bladeless Wingman.


-
Excellent bit of mod work, Zephon

-
Is there a difference between the pliers on a Rev and a Wingman/Sidekick? My Wingman pliers can’t cut anything right so I’m thinking of dropping in anything that would fit right away.
It can’t be that hard, right?
-
They are different but I think it should fit
the Rev pliers are not spring loaded and I believe they are bypass cutters like most all LM except for the Wingman and Sidekick
Just a little tidbit, the Rev and Leap share the same plier head 
-
@Poncho65 said:
They are different but I think it should fit
the Rev pliers are not spring loaded and I believe they are bypass cutters like most all LM except for the Wingman and Sidekick
Just a little tidbit, the Rev and Leap share the same plier head 
Yeah, I’m after the bypass cutters which can actually cut something. I’ve got better chances of getting a cheap Rev than a cheap Leap.
-
Yes, for sure the Rev would be cheaper than a Leap :ahhh :D
-
@Zephon said:
Is there a difference between the pliers on a Rev and a Wingman/Sidekick? My Wingman pliers can’t cut anything right so I’m thinking of dropping in anything that would fit right away.It can’t be that hard, right?
It looks doable, but it appears that it would require some Dremel work.
Rev plier head:

Sidekick (Wingman) plier head:

Both:


I just looked at the Wingman and Sidekick MTs I have. Mine are not great either. Anvil cutters work best when the cutting surfaces actually make contact

-
@Adam5 said:
It looks doable, but it appears that it would require some Dremel work.Rev plier head:

Sidekick (Wingman) plier head:

Both:


I just looked at the Wingman and Sidekick MTs I have. Mine are not great either. Anvil cutters work best when the cutting surfaces actually make contact

Awww nuts. I thought it was a perfect drop-in.
Thanks so much for the comparison pictures Adam!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

