December Rebar Challenge
-
I am ready as well
I am gonna start with a stainless model as well 
-
I can’t believe tomorrow is already December :ahhh
I hope everyone is looking forward to the holidays and not carrying any other tool until next year

-
December 01
Day 01
Greetings from Manila, Philippines!
The Rebar was my first LM MT. It was also my least used because of a couple of things: 1) It didn’t have scissors. 2) I wasn’t 100% comfortable with the grip as I felt the back of the file / saw dig into my palm when clamping down something.
I basically work a ‘desk job’ though I’m currently a stay-at-home dad. Well, everyone is staying at home right now coz of what’s happening in the world. Most of the tasks the Rebar would be handling would be DIY or small home jobs.
Lately I’ve “invested” in a pair of parsing wrenches which allowed me to customize my Rebar’s load-out. It now has scissors. It now has a bit adaptor. It practically has the same load-out as a Wave without the OHO capabilities. Hopefully by mid-month, it will soon have a pocket clip just for the heck of it. With that said, here’s Day 1 of my Rebar Challenge:
We bought stuff over the weekend for the kids. Here’s the Rebar cutting tags with the scissors.


-
Day 01
Greetings from Manila, Philippines!
The Rebar was my first LM MT. It was also my least used because of a couple of things: 1) It didn’t have scissors. 2) I wasn’t 100% comfortable with the grip as I felt the back of the file / saw dig into my palm when clamping down something.
I basically work a ‘desk job’ though I’m currently a stay-at-home dad. Well, everyone is staying at home right now coz of what’s happening in the world. Most of the tasks the Rebar would be handling would be DIY or small home jobs.
Lately I’ve “invested” in a pair of parsing wrenches which allowed me to customize my Rebar’s load-out. It now has scissors. It now has a bit adaptor. It practically has the same load-out as a Wave without the OHO capabilities. Hopefully by mid-month, it will soon have a pocket clip just for the heck of it. With that said, here’s Day 1 of my Rebar Challenge:
We bought stuff over the weekend for the kids. Here’s the Rebar cutting tags with the scissors.
Nice kickoff for the challenge

-
Hello Day 1 of the Rebar challenge.
I have 3 but for this challenge I will use my knifeless Rebar in practice for when our current regime allows us to travel and get home easily.
I can leave but cannot get back at present as you cannot get a quarantine spot and then if you can get it one the cost is around US2000. I was hoping to get to Europe sooner.
Anyway my day 1 pic is the magic opening of the down under surprise package .
Thanks to the the team for sending it .

-
Don't mind me, just making sure I get notifications for this

I'm not doing a December challenge, but I still like to watch you all suffer

-
Great start Zephon and Paul!!!

Since it's just 21:44hrs here, I'll just peep in my weekly choice 'til the 22nd; I work at a school, and clinic-based settings, and I'm unable to carry bladed implements or tools so, Knifeless Rebar (usually complemented with the bit kit shown) it is!
Can't wait to see everyone's pictures, either action or beauty shots so,
!Oooh, such a lovely thought GF, thanks!!!!


-
@Juan el Boricua said:
Oooh, such a lovely thought GF, thanks!!!!
I actually really like my Rebar, but I have a tradition of opening my girlfriends gifts with knives she's previously gifted me, and the Rebar (and Executive) don't fall into that category unfortunately :ahhh
Though I'm not sure how I'd do with only internal opening tools all month loooong

-
@Juan el Boricua said:
Great start Zephon and Paul!!!
Since it's just 21:44hrs here, I'll just peep in my weekly choice 'til the 22nd; I work at a school, and clinic-based settings, and I'm unable to carry bladed implements or tools so, Knifeless Rebar (usually complemented with the bit kit shown) it is!
Can't wait to see everyone's pictures, either action or beauty shots so,
!Oooh, such a lovely thought GF, thanks!!!!

I like the setup of your knifeless Rebar, Juan

Update:
Apparently, tight wasn’t tight enough on the scissor pivot. It skipped on its spring several times when I use it at a certain angle, like getting leverage to cut tag stitching that’s practically stuck on the surface.
-
Thank you, Zephon; I hope that you can just retighten the pivot and/or re-peen the scissors' pivot and have yours back in perfect working order.

-
@GearedForwards said:
I actually really like my Rebar, but I have a tradition of opening my girlfriends gifts with knives she's previously gifted me, and the Rebar (and Executive) don't fall into that category unfortunately :ahhhThough I'm not sure how I'd do with only internal opening tools all month loooong

I’ve got a prediction at the end of the challenge this early on. On 2022, these 2 will be inseparable in a kit.
But until the new year, every move that will require the Rebar would have to be planned and deliberate due to the nature of internal opening tools.

-
Still November here :ahhh
Great to see that the Challenge had already started though 8)


-
@Zephon said:
I’ve got a prediction at the end of the challenge this early on. On 2022, these 2 will be inseparable in a kit.But until the new year, every move that will require the Rebar would have to be planned and deliberate due to the nature of internal opening tools.
Looks like a very capable pair to me, combining a nice OHO blade with a dependable MT is always a recipe for a winner.
My pants are in no risk of falling down so my pockets are always loaded, I usually carry a Rebar and Explorer in an organiser, a minichamp and dedicated knife loose in the pocket.
-
I know day 1 has yet to start for people on the other ends of the globe, but I’d like to share a little something that I did with the Rebar.
Bit holder in a Rebar + T10 (and a matching pair of T10 on an ST300) allowed me to take apart a Wingman…..to add a bit more of ‘value proposition’ in an otherwise neglected tool. Still wish there was some ‘drop-in’ way to change the Wingman plier head.
Anyway, I’m enjoying the bit holder in the Rebar. It’s a matter of personal preference if you’ll use the bit adaptor on the philips or mod the tool to hold the bit holder. (Nope, I’m not doing that to my ST300….yet).

-
Welcome aboard, Davis
Plenty of time left to join in 
Great pics already for Day 1 :ahhh
Zephon, I that your day 1 pic? Or are you going to oost more later today
if it is, it needs to.have the Day on it :ahhh 
-
Day 1
To start not only the challenge but also the day, the Knifeless helped in fixing some toys: its Phillips helped remove battery tray cover off, the pliers to hold wire and reposition contact (and serve as the soldering iron's rest) and, with the help of its bit kit, open up and close the Pocket Simon. The medium flat helped prying off the RC body and battery tray cover, and the antennae got straightened with the pliers.




-
Day 1 of 30
Can't believe it is already December 2021 :ahhh
I have a stainless steel Rebar with me today

It needs to be known that from when they released the Rebar back around 2012 to sometime in 2016 that I carried a stainless steel Rebar almost exclusively 8) No mods no nothing :D Just pure Rebar goodness :D So in the last decade the Rebar has been my most carried tool, followed by my Charge Plus and third by something from the Supertool family 8)
Enough talky talky, now a few pics :D



-
Day 1
My modded Rebar, with a similiar load-out as Zephon:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
