December Rebar Challenge
-
@Zephon said:
Yeah I’m eager for the pocket clip. The Rebar falls into a horizontal position in my pockets on the pants I wear at home since it’s the only thing inside.Same here!
@Adam5 said:
I was going for more of a monolith on the Moon type of picture, but there was too much stuff in the background. So I had to come in closer to take the picture.When I first saw your pic, I was going to say that it looked like it was on the moon... so you succeeded!

-
-
@kottskrapa said:
Day 2 - I did use my pliers today on a stubby zipper but unfortunately it was a two hand job so no action pic. But something else happened last night after the wife went on a trip and the kids was put to bed.I have both a rebar and a spirit x and while they have a lot in common, they are also very different. All of you who have both know this and sometimes it can be a hard choice. One thing that the spirit x have but the rebar is lacking are scissors.

Last night it was time for my first Leatherman mod. I guess I got lucky and finished it quite quick with very little puzzling and only lost the lanyard ring.

I moved the small driver to the other side, took out the lanyard ring and replaced it with the bushing from the other handle, I tried it without it at first but the tools where loose and the scissors was grinding against the file, then I grinded down the scissors plate just enough to clear the tip of the awl. It closes properly and works great! I know many of you already done this mod and I really understand why. What I don't understand are why I didn't do it sooner

Thank you all modders who showed me the way on how to do it. Nobody mentioned, nobody forgotten
[It's not failure if you learn something from it]
Great job and a great mod
Congrats 
-
Many great pics already today, peeps

-
Day 2 of 30
Used the wire cutters and the pliers on some tie wire this morning
No pics because I was working
:DDid have time to make a few after though ;) the coffee pic was made before :D



-
I just want to remind Poncho that December has 31 days

Also you missed the number on today’s post :D -
This is the 3rd or 4th time I have done this challenge
So just 30 days for me
It will give me 1 day to prepare for the January Toolbox Challenge :ahhhAlso, I could have sworn I typed the day in ??? fixed now
:D -
Day 2
Modded Rebar w/ scissors
[attach id=0 msg=2299850]
Plier head given the + treatment
[attach id=1 msg=2299850]
PE blade polished, med screwdriver thinned, awl reprofiled and sharpened and can opener to package opener
[attach id=2 msg=2299850]



-
Modded Rebar w/ scissors
[attach id=0 msg=2299850]
Plier head given the + treatment
[attach id=1 msg=2299850]
PE blade polished, med screwdriver thinned, awl reprofiled and sharpened and can opener to package opener
[attach id=2 msg=2299850]
Nice work! Fixing the shape of the awl are my next work. Don't like how wide it is, yours looks much more practical
[It's not failure if you learn something from it]
-
Thanks Rich
they are some of my favorite pics to take nowadays
also, you need scissors on yours as well
:DNot sure if I have seen a close up of the tools on your Rebar in a while, Steve :o Nice work on those

-
Modded Rebar w/ scissors
[attach id=0 msg=2299850]
Plier head given the + treatment
[attach id=1 msg=2299850]
PE blade polished, med screwdriver thinned, awl reprofiled and sharpened and can opener to package opener
[attach id=2 msg=2299850]
Great mods, Steve; I specially like the pliers head treatment and the can/bottle/package opener!!!

-
@Poncho65 said:
Thanks Rich
they are some of my favorite pics to take nowadays
also, you need scissors on yours as well
:DI normally prefer multitools without scissors because I rarely need them, but they're not as bad as some completely useless tools like a can opener. That's why I really appreciate that Leatherman has a combination can/bottle opener .
-
Day 2: Tested the wire stripper and crimper when making a extension cable for my multimeter at work




-
Nice job, RF; it looks that the crimper is quite functional ( haven't used it from the Rebar, Wave, or ST300) so, I'll give it a go next time. Thanks for the finished product picture!
Day 2
Not much going on now so, just a beauty picture with my pal here...

-
Day 2
Breaking down a bundle of 2x4s. The replaceable cutters are excellent for cutting plastic strapping, more efficient than the standard plier cutters. Also pulled staples from the boards.


-
Hello day 3
Nice moon pic Adam5.
Today was a bit of work. The cooling fan in the ice machine stopped making noises which meant the machine stopped working.
Out with the old and I will see if I can find a spare.


-
@Poncho65 said:
This is the 3rd or 4th time I have done this challenge
So just 30 days for me
It will give me 1 day to prepare for the January Toolbox Challenge :ahhhAlso, I could have sworn I typed the day in ??? fixed now
:DIn such case I will allow it :D
It's the first ever challenge for me and I took it mainly to ease the anxiety of choosing a knife/tool for the day (which is even bigger if I'll be away from the toys for a few days). And the more the accumulation of knives and MTs grows the tougher it gets
. So for this month it's kind of decided already 
Great moon pic Adam

** Day 2**Today I used the flat head and the pliers to take out few staples. Then the pliers to get a fresh edge on the utility knife.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

haha