December Rebar Challenge
-
Hello day 3
Nice moon pic Adam5.
Today was a bit of work. The cooling fan in the ice machine stopped making noises which meant the machine stopped working.
Out with the old and I will see if I can find a spare.


-
@Poncho65 said:
This is the 3rd or 4th time I have done this challenge
So just 30 days for me
It will give me 1 day to prepare for the January Toolbox Challenge :ahhhAlso, I could have sworn I typed the day in ??? fixed now
:DIn such case I will allow it :D
It's the first ever challenge for me and I took it mainly to ease the anxiety of choosing a knife/tool for the day (which is even bigger if I'll be away from the toys for a few days). And the more the accumulation of knives and MTs grows the tougher it gets
. So for this month it's kind of decided already 
Great moon pic Adam

** Day 2**Today I used the flat head and the pliers to take out few staples. Then the pliers to get a fresh edge on the utility knife.




-
Day 02

-
@Juan el Boricua said:
Nice job, RF; it looks that the crimper is quite functional ( haven't used it from the Rebar, Wave, or ST300) so, I'll give it a go next time. Thanks for the finished product picture!Day 2
Not much going on now so, just a beauty picture with my pal here...
... although by almost end of day it was put to admin. services, opening an arts-and-crafts package for our customers!


-
Day 2
I've been playing with my Rebar all day during teleconferences, hoping to work it in a little. Just now, the Rebar blade helped a new friend escape its packaging and join the party...

-
@RF52 said:
@Juan el Boricua @Rich_SD First time trying out the wire stripper and the crimper, the crimper does a good job, the wire stripper not so much
Easier and faster to use the wire cutter or one of the blades carefully 
Sent fra min M2002J9G via Tapatalk
I would agree with this on the wire stripper. Maybe I’m just showing my age but I do find it faster to use the blade to cut thru insulation to strip a wire. Or the pliers.
-
@Zephon said:
I would agree with this on the wire stripper. Maybe I’m just showing my age but I do find it faster to use the blade to cut thru insulation to strip a wire. Or the pliers.
and, I'm also known to "bite softly" into the insulation with the wire cutters (molded in or replaceables) and peel! 
-
@RF52 said:
@Juan el Boricua @Rich_SD First time trying out the wire stripper and the crimper, the crimper does a good job, the wire stripper not so much
Easier and faster to use the wire cutter or one of the blades carefully 
Sent fra min M2002J9G via Tapatalk
@Zephon said:
I would agree with this on the wire stripper. Maybe I’m just showing my age but I do find it faster to use the blade to cut thru insulation to strip a wire. Or the pliers.@Juan el Boricua said:
and, I'm also known to "bite softly" into the insulation with the wire cutters (molded in or replaceables) and peel! 
Totally agree with all of you. I find the blade or the wire cutters to be much easier to use than the wire stripper notch. It is one of those things you should not do unless you know how to do it properly.
-
Thanks for everybody's compliments on this morning's photo. I have been really busy during the day and have not been able to photos of the Rebar in use (and it has been used a lot!). So, I make sure to take one at the shop everyday. Sometimes I come up with a decent shot, othertimes it is not so interesting. Today's shot just came to me as I was looking around.

-
@Adam5 said:
Thanks for everybody's compliments on this morning's photo. I have been really busy during the day and have not been able to photos of the Rebar in use (and it has been used a lot!). So, I make sure to take one at the shop everyday. Sometimes I come up with a decent shot, othertimes it is not so interesting. Today's shot just came to me as I was looking around.
Calendar worthy

-
**Day 3
December 3**
For a little lolz today - I used the Rebar to remove a hex bit stuck inside a bit adapter

Good thing I managed to pull it out - I threatened to use the Crunch if it still didn’t want to detach.

-
Good job at coercing the bit to come out peacefully!!!!

-
@Juan el Boricua said:
... although by almost end of day it was put to admin. services, opening an arts-and-crafts package for our customers!
Camper Santa?
Great pic - very angelic.
-
December 3**
For a little lolz today - I used the Rebar to remove a hex bit stuck inside a bit adapter

Good thing I managed to pull it out - I threatened to use the Crunch if it still didn’t want to detach.
I do hate when that happens
I try to either use only the LM flat bits or longer 1/4 inch bits these days :ahhh -
Nice one, pnoodle 8)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
