December Rebar Challenge
-
bonus pic
[attach id=0 msg=2300488]

-
-
Lots of great reports on Rebar usage (especially Davis) and lots of nice pics! I really like Steve and David's continued inclusion of traditional folders too
And don't get me started on black oxide 🥰 -
-
Day 4
After 3 days of my Rebar riding low and horizontal in my pocket, I need to start working on a pocket clip solution. Decisions, decisions...

Since it's the easiest to apply and remove, I'll start out with the suspension clip:

I've been carrying my Rebar all day with the suspension clip, and it works great. The Rebar hangs in the perfect position, and I don't even notice it's there. The PST did the same with the suspension clip, but the Rebar is just as comfortable, yet it is a much beefier tool. All was going well until I needed the blade to open some packages and to cut off some labels...

Crap! I would say that's less than ideal, especially since I use the blade so frequently. I'll keep it this way for a few days, but I suspect I'll switch to the Nite Ize clip.
-
Ooops... Sorry it's not working for you Rich; had you tried dropping the lanyardring/clip back over the handle, like I do in first picture? The 2nd. picture is to show how it's clipped. Hope this helps (but if not, the Hip Clip is a great solution!
)

-
@Juan el Boricua said:
Ooops... Sorry it's not working for you Rich; had you tried dropping the lanyardring/clip back over the handle, like I do in first picture? The 2nd. picture is to show how it's clipped. Hope this helps (but if not, the Hip Clip is a great solution!
)Thanks! I'll try it that way tomorrow. Just playing around with it in my hand (not actually cutting anything), I suspect that it will still flop around too much. I wonder if I could use a small magnet to keep it secured away from the blade.
-
@Poncho65 said:
Thanks, Rich
I didn't destroy the Kick ;) I just swapped the Rebar knurled screw into at after getting tapped the one from it 
I purchased the tool to remove those knurled screws, but I doubt my ability to do a swap like that. It also looks like a decent amount of filing is required on the Rebar to make room for the side of the clip :ahhh
-
@Rich_SD said:
Thanks! I'll try it that way tomorrow. Just playing around with it in my hand (not actually cutting anything), I suspect that it will still flop around too much. I wonder if I could use** a small magnet to keep it secured away** from the blade.but I doubt my ability to do a swap like that.
This sounds like a good idea...
...the 2nd one highlighted, not; you could try taking the pivot out, study and then measure and try out the clip without the filing; get to know what's there. Then decide if or how much filing is needed and if willing. If not, it's just a matter of putting everything back toghether as it was.

-
@Juan el Boricua said:
Ooops... Sorry it's not working for you Rich; had you tried dropping the lanyardring/clip back over the handle, like I do in first picture? The 2nd. picture is to show how it's clipped. Hope this helps (but if not, the Hip Clip is a great solution!
)I thought the same thing and was going to show the same thing, well you may be significantly faster than me Juan, but I'm still doing it :ahhh

-
Good to know that someone else has a similar way of thinking as I do!!

-
Hello day 4.
Fan replaced on the ice machine and now some reassembly required.


-
Probably...

-
@Rich_SD said:
I purchased the tool to remove those knurled screws, but I doubt my ability to do a swap like that. It also looks like a decent amount of filing is required on the Rebar to make room for the side of the clip :ahhhNope, no filing if you don't want to :D You can cut the notch but I was already using that clip as a wrench before I got the loki wrenches and had bent the clip flat
it swivels a little from time to time but sit well in the pocket without moving 
-
Day 5
December 5
Nothing special for Sunday. Trying to get some rest and all that.

-
Day 5 - I'm at work until 18 tonight and I don't thing I will need my rebar that much

[It's not failure if you learn something from it]
-
Day 5

-
Day 5
Used the awl last night to punch a couple of holes in some straps for my wife:

-
Day 5 is off to a great start

[attach id=0 msg=2300643]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

