The Hacked Leatherman Owners Club.
-
all wives do bud. They are the balance. We'd be bankrupt, and lost without them lol that's why cummunes like this exist hahaOk, no more feely/heartfelt sentiment from me lol to business. I've always considered a Philips driver pointless with the large bit exchanger, but since reading many posts on here I've had a change of heart. The depth of a screw can at times prove difficult with the wide flat leatherman bits. Can a rebar Philips be dropped into a wave plus without any fancy grinding? I imagine I'd have to drop some tools, and maybe reorganize. But I'd hate to do anything that would void a warranty as my wave is a virgin beauty fresh off the assembly line lol -
Dirk, although it drops in and locks, you'll have to remove the pliers rest pin so that it sits in flush; the driver will be now your pliers head rest, like in the Rebar/ST300. So, the swap can potentially void the warranty.

-
Dangit! I figured it'd be something like that. It's just so damn pretty!! 😫 I don't even like seeing my fingerprints on it haha. Thanks for the advice. Much appreciated
-
@DirkDiggler65 said:
Lol bro I get it. I know "regular guys". Lots of em. They go to bed at 9:30, and make sure they have the proper amount of fiber in their diets. They stop drinking when they've had just enough, and avoid 3rd hand smoke because MSNBC tells them it's the devil.But we beautiful irregulars are what make this place interesting. We obsess, overindulge, and tango with excess with a thorny rose clutched in our teeth. We live it to the fullest, burn it out the fastest, and rage into the deep hours of the night. We put on our "normal" mask as we start our day to day sure. But somewhere that voice inside calls us. To get back in that shop. Climb that tree stand. Or build that next project in the backyard that will be the envy of every passerby. They'll be thinking "that's a great thing he did". We're thinking "I couldn't NOT do it!" From one "Normal guy" to another. I say "I see you, and you rock!"@Poncho65 said:
That is an awesome post :o

And my wife does try to get me to go to bed at 9:30
:DI probably should but usually don't

I regularly go to bed around 9:30. Otherwise, I am fairly "irregular", though perhaps not in a cool way :D
-
@DirkDiggler65 said:
Dangit! I figured it'd be something like that. It's just so damn pretty!! 😫 I don't even like seeing my fingerprints on it haha. Thanks for the advice. Much appreciatedAnd stil will be; only more functional and to your liking!!!
You know, you could also get a 2nd one as mod fodder from the 'bay or the Tool Needed thread, and being an active member of MT.o...oooh boy, there are sooo many mods that you'll be "the kid in the candy store"!!
>:D
>:DAnyhow, good mod'ing and, once finished remember:

-
This thread isn't really a place to worry about the warranty

:D
-
Some more dual color action




-
@Poncho65 said:
This thread isn't really a place to worry about the warranty
:D
Wellll when you put it like that. So matter of factly, now I do feel kinda silly bringing up the "W" word in a hacked multitool thread

I'll consider that my strike 1 lol I'll save anymore nonsense jabber like that for the "Refurb/salvage/preservation thread"

-
My parse wrenches have arrived!
I have a rebar as a donor and a few things to try! Rebar saw to a 300m and a rebar awl into a wave. These wrenches are amazing! 
-
Congratulations
Can't wait to see what all you get accomplished 8)

-

Coffee is on its way here too.
Let's spend the wait looking at my Zapped*) Free...
*) Equipped with many of ZapWizard's goodies. Qualifies as hacked, methinks...

-
Thanks DT
and I think that the Zapwizard stuff is considered hacked 8) it is almost like magic :ahhh 
-
The titanium scaled one is just something I am toying with. Still has plenty of bugs to work out the Aluminum one has been with me since late 2018



-
Taking your toys apart again? That's why we can't have anything nice around here

Looks good to me

-
I had both handles of the AL as half tools and decided to buy some titanium scales. Took forever to get them here earlier in the year and even longer for me to take the other one apart and get those scales on. I don't have Ti or Tti pivots so the top pivot is one from the tool end of a Wave and actually to small for the file and knife blade
I either need to fill them in and Redhill or find a TTi pivot
:D The tools on that end (as you know) don't lock and go farther over than what the other end does
I need to find a solution similar to the way you added a piece with your half tool or something along those lines 
As I said, lots of bugs to work out but it looks pretty cool 8)
-
I am running to a similiar problem with the Sidekick knife I am working on. With the Multiforce and Rev knives, I was able to bend the frame on the plier end enough to provide some detent. Enough to make scissors and can openers work okay.
With the Sidekick knife, I am dealing with a missing piece of metal on the plier end. So the tools flop around when installed on that end. I glued in a piece of rubber, which works okay, but I doubt it will hold up very long. I think I am going to try to modify the frame and insert the removeable tool backspring from the other handle. Don't know if I have the ability to make it work

Titanium scales on the unused handle? That makes sense. The titanium Charges on eBay are a wee bit expensive to convert to knives. At least for poor electricians. It may be different for masons. They make the big money
:DI am interested in whatever solution you come up with

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


