December Rebar Challenge
-
Day 9
December 9
Used the Rebar as a T8 driver to open up a Wingman.
If there’s one thing I’m learning right now, it’s that there are times when 1 tool isn’t enough and a partner is needed.

-
[attach id=0 msg=2301391]
Nice pic. I love Christmas cactus... ours is blooming too.

@DavisNikolov said:
** Day 8**Serrated blade was used while packing some boxes today. It was quite fun just to place it over the tape at a slight angle and yank the tape up. Worked great.

Then the pliers were used to take out the metal dish out of the steam cooker. At the upper floor there were some chicken breasts. Add to that a scoop of butter, some BBQ souse and Soy souse and - "winner, winner, chicken dinner"


Davis, you're in the lead for the "Most Used" category

@Pauldmmwc said:
Hello Day 8.
Two of my favourites side by side.
[attach id=0 msg=2301489]
@Adam5 said:
I have dismembered that very MT to harvest parts also.What is it? Is there particular parts on it that are useful?
-
Day 8
I used the blade a couple times this morning, but I didn't get a pic... just the usual package and box opening. I'm still missing having a one-hand opening blade, but the Rebar is reminding me of the many years I used my Gerber Multipliers and never bitched about not having a one-hand opening blade
I hate to say it, but I am liking the Rebar more than the PST I carried last month - the Rebar is more functional and it feels much more durable than the PST. These improvements come at the cost of a more bulky tool, but I don't notice the difference when it's in my pocket. Anyway, here is my daily pic -
-

The Rebar is so photogenic!
More! More! 
-
@Rich_SD said:
What is it? Is there particular parts on it that are useful?The Surge-like scissors and the knife blade. The internal tools could be useful also.

I was able to put those scissors into a Wave:

The MT and its variants are typical waaay overpriced on Amazon, but sometimes it can be bought for under $20. It is a great buy at that price.
-
@Adam5 said:
The Surge-like scissors and the knife blade. The internal tools could be useful also.
I was able to put those scissors into a Wave:

The MT and its variants are typical waaay overpriced on Amazon, but sometimes it can be bought for under $20. It is a great buy at that price.
Thanks!
Now I have something else to search for... 
-
Day 9
[attach id=0 msg=2301632]

-
@Adam5 said:
The Surge-like scissors and the knife blade. The internal tools could be useful also.
I was able to put those scissors into a Wave:

The MT and its variants are typical waaay overpriced on Amazon, but sometimes it can be bought for under $20. It is a great buy at that price.
What was that MT again
how well do thise scissors cut compared to the smaller internal scissors of the Wave

-
Halfway through Day 9 and only 2 pics :ahhh
Guess I need to put mine to make 3 :D
-
Day 9 of 30
My most heavily modded Rebar again today


-
He [attach id=0 msg=2301668] llo day 9.
Fixing some temperature probes to some reo so we can check temperatures in a large concrete base. Am expecting a peak at about 800mm depth of about 66°C.

-
@Adam5 said:
I am completely unsurprised by what you found. When a low price electronic device fails, most of the time the cause for the failure is due to a cheap capacitor.Oh, I've seen a lot of bloated and failed capacitors. But exploded :o
It was :) I rarely cook nowadays, but when I do I often find tons of momentary inspiration and come up with such stuff. Or I've seen it somewhere, forgot I've seen it, make it and think I have some kind of hidden tallent :D
** Day 9 **Opened a can of peas.


Ate an apple

Pried a stuck lid from a jar of boiled linseed oil. Needed it to soak this guy I finished today. Stared it on January while in quarantine, got to the middle of the project and just left it. Stayed on my pc ever since. Looked at it today and felt like finishing it, only cut myself twice





-
Day 9:
Breaking down cardboard boxes again.

-
@Poncho65 said:
What was that MT again
how well do thise scissors cut compared to the smaller internal scissors of the Wave

They cut better than the Wave scissors if I remember correctly. I will be testing them soon.
Here are some of the "brands" being sold on Amazon at the moment:
https://www.amazon.com/Multitool-Military-Stainless-Scissors-Emergency/dp/B091MTMYSF/
https://www.amazon.com/Multitools-SUNBIRD-Accessories-Multitool-Christmas/dp/B09CDR45F6/
https://www.amazon.com/Multitool-Assisted-Scissors-Multipurpose-Survival/dp/B091Y5WCZ2/
https://www.amazon.com/FANTASTICAR-Mintcream-Multitool-Spring-Action-Screwdriver/dp/B08W46L668/
https://www.amazon.com/WATERNEST-multitool-multi-tool-replaceable-sheath,Stainless/dp/B095KN2ZCK/
A couple of these lack the file (no loss) and the saw (mediocre). All of them are overpriced at the moment in my opinion. I paid $30 for my Bercol branded version, and I used it for a couple of months. No complaints at all, but I don't think anyone should pay more than $30 for it. Since then, I bought 2 at $10 and 1 at $20. It is a good bargin at those prices.
But I did find this one:
https://www.amazon.com/Gehiqey-Multitool-1Multitool-Stainless-Valentines/dp/B09JZJSHQ5/
At the moment it can be bought for $20. The internal tools look different, but otherwise it is the same MT.
By the way, this is the thread in the Cheap and Cheerful subforum concerning this MT:
/topic/87426
-
Day 9
After spamming the thread with non-Rebar related info, I had better share a pic of the Rebar in use:

-
@DavisNikolov said:
Oh, I've seen a lot of bloated and failed capacitors. But exploded :oGood point. I have never seen that either.
-
@DavisNikolov said:
Oh, I've seen a lot of bloated and failed capacitors. But exploded :oIt was :) I rarely cook nowadays, but when I do I often find tons of momentary inspiration and come up with such stuff. Or I've seen it somewhere, forgot I've seen it, make it and think I have some kind of hidden tallent :D
** Day 9 **Opened a can of peas.


Ate an apple

Pried a stuck lid from a jar of boiled linseed oil. Needed it to soak this guy I finished today. Stared it on January while in quarantine, got to the middle of the project and just left it. Stayed on my pc ever since. Looked at it today and felt like finishing it, only cut myself twice





Nice work with the bear!
[It's not failure if you learn something from it]
-
Day 9 - I'm working nights and almost forgot today's pic. We was supposed to get in early to have a meeting with the big boss before our shift started and I forgot to take out one of my piercings. We are not allowed to have visible piercings on site but luckily I had a spare keeper in my work bag. Wasn't sure it was the right size but I measured it on my rebar and 4mm it is

[It's not failure if you learn something from it]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

