SAK Exploded / Dismantled Photos
-
That looks like a nice example jaya_man

Are you restoring it? -
The climber small isn’t mine... it belongs to a friend... The scissors layer was used for the Ti Compact Tinker Small mod I did recently...
The Cadet II X was a mod I did a while back... I intend to dismantle it again and add an inline phillips to it... that is if I can find an appropriate donor...

-
Good work jaya_man

Vintage 84s are rare down my neck of the woods, so it’s great to see one disassembled.

-
If someone what any of them gone just let me know

[It's not failure if you learn something from it]
[/quote]Thanks for this, Kottskrapa!
Was dismantling and was removing what I could after removing each pivot. So I missed where this one went:
-
That goes between the small blade and liner...
-
I’ve definitely enjoyed taking other knives apart more than an XAVT but those steel pins didn’t make things fun at all.

-
Nothing new here. :D
Crab claw 234U (missing the U) Spartan/Camper
1st pic is as disassembled
2nd is without the original 70+ year old gunk.
.

-
91mm Angler
Dissembled:

-
Brand new Cadet
The only thing to clean was all the factory oil!

-
@craggus2000 said:
Spartan Lite dismantledA later Spartan Lite. (2013) with the 2nd generation Lite housing visible without the hook. Also found that the housing protrudes more in front of the switch to prevent accidental activation. Didn’t notice that til today. Good job Victorinox.

2.5mm pins removed with conventional drilling. 2.2mm pins are full length.

-
And forgot to post the Lite Module.


-
Brand new Walker from a sealed box. 2020 and 2021 date codes in the scales. Didn’t even operate the tools before disassembly.
Interesting that this was built with all four pins. I was expecting it to be like My First Victorinox knives which from what I’ve seen so far, are assembled with only 3.
Pins removed with ‘no drill’ method. The 4th pin is only being used for scale attachment, so it’s harder to cut the head since there’s nothing internal to preventing it from moving or support it much for peening. Just ‘floating’ in the three liners.

-
thank you it's interesting

-

Forgot to take pics last time I had one apart. And now that I think about it, I should have taken pics of the parts loose. I modded this one to a UV bulb and rejiggered it to use the batteries in parallel for a lower 3V instead of 6V.
The red switch sits inbetween the LED leads and moves the + (? I think) lead to contact the battery side. But that can mostly be seen with the main door off anyway.
For anyone modding these, get LEDs with long leads. Short leads make for more things to do.
-
I find equally interesting the lamp and the solutions adopted. but there has been considerable progress on the LEDs and I find it a pity that victorinox does not completely rethink this lamp
-
@hulk. said:
I find equally interesting the lamp and the solutions adopted. but there has been considerable progress on the LEDs and I find it a pity that victorinox does not completely rethink this lamp
And it’s ironic that their last iteration, while cool looking, actually functions worse than the last gray plastic version because the clear housing blinds the user once eyes are acclimated to the dark. I have to block it with my thumb when I use those.
I’d like a change to something like a 2032 3,7v Li-ion rechargeable. Swapped to the other side would be nice, since it has more room. But that would mean it couldn’t pair with a magnifier.
-
Super helpful :D! Exactly what I was looking for :D
-
1996 Marlboro - The Trail Guide

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
