The Hacked Leatherman Owners Club.
-
Bought the scales rather cheap
or else I would never had afforded them myself :D and I could never make myself take apart a good Charge of any model to make a half knife :ahhh my original Al had lots of problems and ai had other usable parts that went into it to make it usable 
I hope you come up with a solution and I will see what I can do but I am a bit slow in my progression with this project :ahhh
-
This tweak has probably been done to the gills I'm sure. But it's the mod that popped my cherry! Lol First time I've ever taken a grinder to a tool in my life. Didn't feel right posting on this thread again though until I had made some sparks in the garage lol I now have the perfect Crunch companion for the times I don't want to rock the Wave. :ahhh
It now fits perfectly in the small jeans pocket. It offers the one hand open blade, small pliers, and I'm really digging the easy of access to the bit holder.


-
It has been done but not sure anyone has done it to a Cx :o
This is what the Freestyle should have been
but it would have taken sells away from the Skeletool series and I am sure they didn't want to do that ;) :DGreat job

-
That's one nice mod, DD, and can agree with Poncho about that that is how the Style should 've been. However, and now that it has been D/C'ed, maybe Leatherman can do a Skele Lite based like this!?!?

-
Thanks gents! Yeah the caribiner always seemed a little outta place. And even with those hammer attachments, it still always had the lipstick on a pig kinda feel. If the idea was minimalist, why add any pointless junk to it? Advertising it specifically for the small jeans pocket would've definitely been the way to go in my humble opinion.
Now flirting with the idea of zapping the Wave. My biggest issue i have with it isn't really tool combination. It's more the width of it. Now that I've been getting more into pocket clips, it just feels too clunky in my pocket. I love the idea someone had on here (not sure who it was, my apologies) about cutting off half the frame and eliminating 2 of the outside tools. Seems like it would seat perfectly after that. If you guys could point me in the right direction of who that was I'd really like to get some feedback on how much they like the tool now. Post mod. So that way I can meter expectations before the hacking begins.
-

/topic/88548
-
Damn those are sweet Adam! I have a Kick I bought literally for just the pivot. Planned on clipping my crunch one of these days, but those clips are hard to come by. Didn't want to feel like I've wasted a whole tool for a single part so I was considering one of those half tool knives as an option.
Those phillips bits are so damn beefy on those tools. Take up a decent amount of space. Has anyone ever noticed how sleek and sexy the phillips driver is on the Crunch? And is that standard on any other tools? As the Crunch is the one tool I have that I'll never in my life harm lol
-
Nice looking Sidekick knife, Adam 8) and thanks for the link

-
@DirkDiggler65 said:
Thanks gents! Yeah the caribiner always seemed a little outta place. And even with those hammer attachments, it still always had the lipstick on a pig kinda feel. If the idea was minimalist, why add any pointless junk to it? Advertising it specifically for the small jeans pocket would've definitely been the way to go in my humble opinion.Now flirting with the idea of zapping the Wave. My biggest issue i have with it isn't really tool combination. It's more the width of it. Now that I've been getting more into pocket clips, it just feels too clunky in my pocket. I love the idea someone had on here (not sure who it was, my apologies) about cutting off half the frame and eliminating 2 of the outside tools. Seems like it would seat perfectly after that. If you guys could point me in the right direction of who that was I'd really like to get some feedback on how much they like the tool now. Post mod. So that way I can meter expectations before the hacking begins.
It could have possibly been Sam Lim
he has cut all kinds of tools up in all kinds of ways :D -
@Poncho65 said:
It could have possibly been Sam Lim
he has cut all kinds of tools up in all kinds of ways :DHaha.. It could be.. I cut away one side of the frame and added scales. I carry it on off days sometimes. It's very much like a Curl, but all locking tools. I cut remember where I posted it..
-
@Sam Lim said:
Haha.. It could be.. I cut away one side of the frame and added scales. I carry it on off days sometimes. It's very much like a Curl, but all locking tools. I cut remember where I posted it..Hey Sam, I loved the idea to thin out the wave. How much work was it actually? And were you happy with the results? Are there any difficulties the mod presents, now that you've used it for a bit?
And thanks for the help btw
-
@DirkDiggler65 said:
Hey Sam, I loved the idea to thin out the wave. How much work was it actually? And were you happy with the results? Are there any difficulties the mod presents, now that you've used it for a bit?And thanks for the help btw
From the pics u can see that its not really thin out as some form of scales are still required at the cut side. Cutting is not too difficult. I do most things with just a dremel. It does feel a little lighter but not much different form wise. So far haven have any issue with this mod. If you want thin, Curl ( left) is pretty thin. But the internal tools doesn't lock. And I personally really do not like the pocket clips on the free series.

This is one that I cut down also which I like alot. I love the reduced weight and the form factor while still having a heavy duty tool.


Then sometimes I like to go the opposite. Recently put together.

-
@Sam Lim said:
From the pics u can see that its not really thin out as some form of scales are still required at the cut side. Cutting is not too difficult. I do most things with just a dremel. It does feel a little lighter but not much different form wise. So far haven have any issue with this mod. If you want thin, Curl ( left) is pretty thin. But the internal tools doesn't lock. And I personally really do not like the pocket clips on the free series.

This is one that I cut down also which I like alot. I love the reduced weight and the form factor while still having a heavy duty tool.


Then sometimes I like to go the opposite. Recently put together.

You are truly a gifted individual my man! Those are some pretty pieces of toolery right there. But I think I found the one I was referring to. You did a couple years back. You referred to it as the skinny wave/ fat sideclip. That thing had my jaw on the floor.
/topic/51510
-
Ohhhh snap! I see what you did now! It wasn't a full wave that you cut the exterior tools off of. You attached a portion of the wave handle to a sideclip. That's genius! I love the easy access the wave offers with the 1 hand open tools. But I don't think I need 4 of them. Feels kinda clunky. But the solution you came up with there is utter perfection. When form meets functionality. Very nicely done!

-
@DirkDiggler65 said:
Ohhhh snap! I see what you did now! It wasn't a full wave that you cut the exterior tools off of. You attached a portion of the wave handle to a sideclip. That's genius! I love the easy access the wave offers with the 1 hand open tools. But I don't think I need 4 of them. Feels kinda clunky. But the solution you came up with there is utter perfection. When form meets functionality. Very nicely done!
that was quite a while back.. I had actually did some changes to it... :D -
Can we also see pics of the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh Wave
I really love that one

All of the above are also nice as well ;)
:D

-
Few months ago I did some cleaning and touching up on it, and some minor changes.





And then there's the " Mini " of course. ... For those that didn't know, the lower part ( tool end ) of the frame was crack so this happened. and no,... there's no fold out handle.. Earlier one that I did, quite rough handy work..




-
Those are awesome Sam!

It's almost looking into the future of Leatherman models.
Or the past. ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

