The Hacked Leatherman Owners Club.
-
@DirkDiggler65 said:
Hey Sam, I loved the idea to thin out the wave. How much work was it actually? And were you happy with the results? Are there any difficulties the mod presents, now that you've used it for a bit?And thanks for the help btw
From the pics u can see that its not really thin out as some form of scales are still required at the cut side. Cutting is not too difficult. I do most things with just a dremel. It does feel a little lighter but not much different form wise. So far haven have any issue with this mod. If you want thin, Curl ( left) is pretty thin. But the internal tools doesn't lock. And I personally really do not like the pocket clips on the free series.

This is one that I cut down also which I like alot. I love the reduced weight and the form factor while still having a heavy duty tool.


Then sometimes I like to go the opposite. Recently put together.

-
@Sam Lim said:
From the pics u can see that its not really thin out as some form of scales are still required at the cut side. Cutting is not too difficult. I do most things with just a dremel. It does feel a little lighter but not much different form wise. So far haven have any issue with this mod. If you want thin, Curl ( left) is pretty thin. But the internal tools doesn't lock. And I personally really do not like the pocket clips on the free series.

This is one that I cut down also which I like alot. I love the reduced weight and the form factor while still having a heavy duty tool.


Then sometimes I like to go the opposite. Recently put together.

You are truly a gifted individual my man! Those are some pretty pieces of toolery right there. But I think I found the one I was referring to. You did a couple years back. You referred to it as the skinny wave/ fat sideclip. That thing had my jaw on the floor.
/topic/51510
-
Ohhhh snap! I see what you did now! It wasn't a full wave that you cut the exterior tools off of. You attached a portion of the wave handle to a sideclip. That's genius! I love the easy access the wave offers with the 1 hand open tools. But I don't think I need 4 of them. Feels kinda clunky. But the solution you came up with there is utter perfection. When form meets functionality. Very nicely done!

-
@DirkDiggler65 said:
Ohhhh snap! I see what you did now! It wasn't a full wave that you cut the exterior tools off of. You attached a portion of the wave handle to a sideclip. That's genius! I love the easy access the wave offers with the 1 hand open tools. But I don't think I need 4 of them. Feels kinda clunky. But the solution you came up with there is utter perfection. When form meets functionality. Very nicely done!
that was quite a while back.. I had actually did some changes to it... :D -
Can we also see pics of the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh Wave
I really love that one

All of the above are also nice as well ;)
:D

-
Few months ago I did some cleaning and touching up on it, and some minor changes.





And then there's the " Mini " of course. ... For those that didn't know, the lower part ( tool end ) of the frame was crack so this happened. and no,... there's no fold out handle.. Earlier one that I did, quite rough handy work..




-
Those are awesome Sam!

It's almost looking into the future of Leatherman models.
Or the past. ::) -

That is my reaction most of the time when seeing Sams work :D

-
@ReamerPunch said:
Those are awesome Sam!
It's almost looking into the future of Leatherman models.
Or the past. ::)It's like looking at the past, present and future all at once

-
@ReamerPunch said:
Those are awesome Sam!
It's almost looking into the future of Leatherman models.
Or the past. ::)I would call that an " OG Charge " if that ever happened .. Older tools always have those kind of warmer feeling, like they were built and assembled with love

That is my reaction most of the time when seeing Sams work :D

Every now and then a new member will pop up with amazing stuffs. Great forum and inspirations here!
Everyone needs a hobby to keep life happy and moving! 
-
@Sam Lim said:
Few months ago I did some cleaning and touching up on it, and some minor changes.




And then there's the " Mini " of course. ... For those that didn't know, the lower part ( tool end ) of the frame was crack so this happened. and no,... there's no fold out handle.. Earlier one that I did, quite rough handy work..




Daaaaaamn bud! I like the OG leatherman version even better! And I couldn't agree more. I don't own a single older version of these tools, but from what I can gather it seems like they were more about hand feel than these newer ones. Don't get me wrong. I still love all the newer engineering tweaks they've done. It's really impressive. They just seem to be a little less . . . . . . "Soulful" I guess is how I would describe it. They've become less man, and more machine I think.
-
@DirkDiggler65 said:
Daaaaaamn bud! I like the OG leatherman version even better! And I couldn't agree more. I don't own a single older version of these tools, but from what I can gather it seems like they were more about hand feel than these newer ones. Don't get me wrong. I still love all the newer engineering tweaks they've done. It's really impressive. They just seem to be a little less . . . . . . "Soulful" I guess is how I would describe it. They've become less man, and more machine I think.Old School has a better feel to me even if some of the newer tools have more options and are fancier


-
@Poncho65 said:
Old School has a better feel to me even if some of the newer tools have more options and are fancier


To that same point, I had to go to Walmart today to get the kid some new winter hats and gloves. Somehow ended up in the tool section (as per usual lol). And ended up walking out with my first real dremel. Nothing crazy. Your basic single speed. But let me tell you, after today, I don't think I'll ever be saying the "W" word ever again haha
When I first ordered the Wave I was ecstatic. Then when it showed up I couldn't wrap my head around why it felt so sharp and boxy. The tool is rounded top to bottom, but all the knives and saws had sharp painful to grip corners and edges on em. Well me and the Dremski saw to that in fine fashion lol the tool feels so much nicer in my hand now, I don't want to put it down lol



-
Always good to get the sharp edges toned down on a tool

And congrats on getting a Dremel

-
you can do wonders with a dremel. My best friend is the dremel 8220, already burned out 2 motors but getting replacement for the motor is really cheap. People used to complain when the Wave+ was released, the thumb cut out was so sharp they cut flesh.. -
@Sam Lim said:
you can do wonders with a dremel. My best friend is the dremel 8220, already burned out 2 motors but getting replacement for the motor is really cheap. People used to complain when the Wave+ was released, the thumb cut out was so sharp they cut flesh..Yeah dude. The damn edges were so sharp on certain parts it had me wondering how the hell they could let it leave the factory like that. Found myself leaving it at home and EDCing a less optimal tool just because it was kinda disappointing to look at, and even more so to hold.
-
So I spent a good bit of time last night trying to hunt down the exact screw size the kick pocket clip uses. Found close to what I needed but nothing exact. So I went to the garage. In a box given to me by a family friend I found one. This box was 60 years old mind you. And there was 1 single screw in this coffee can that worked perfectly! Lol


-
That is great

-
Thanks for all the help gents! This bad boy is just the beginning. I see a long road of tinkering ahead of me after this one lol was so much fun!



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

