December Rebar Challenge
-
Day 16:
Cut of a bruised piece of an apple for a snack

-
Day 16

-
@Pauldmmwc said:
Hello day 16.
Time for a new brew. Rebar to remove the lid for a start. Now to wait 6 or 7 days for brewing to finish.

So this is a pre-made kit to brew beer at home? Interesting!
-
Day 16
Just some minor use today - I opened a couple packages, and I took another Christmas pic.

-
That's a great picture Rich!

-
I wish that I had a tree full of Leatherman ornaments

-
Day 16
Rebar saves the day!
I drilled these holes through the top of a wall above an electrical panel:

There is only 10" (25.4 cm) of space between the top of the wall and the floor above, so I had to use a short paddle (spade) bit fully inserted in my drill. With the bit fully inserted, it will not penetrate the top plate of the wood-framed wall. So, after drilling a hole the bit must be repositioned in the drill chuck to create enough length to penetrate the top plate. However, due to the construction of the bit it is easy to shear off the end of the shaft. You must adjust the clutch to reduce the amount of torque. I forgot to do this for the first hole.

The bit was stuck in the hole. However, with the help of the Rebar and by using the edge of the hole as a fulcrum, I was able to leverage the bit out of the hole. Though the end of the shaft has been sheared off, the bit is still useable and so is the hole.

-
Day 17
December 17
Was opening paint cans for touch up work. Was using the flat driver of the Rebar on me. Then I thought about the flat driver of the Wingman in that it felt ‘beefier’ as a pry tool. I placed them side-by-side and well, both have their pros and cons. Anyway, I think the finger tab of the Wingman tools might need a tiny bit of trimming down to perfectly fit the Rebar.

-
Excellent Day 16 stuff all
and great start for us on Day 17, Zephon

-
Day 17:
Opened a package


-
Great pic, RF

-
Day 17 of 30
Back with black again :D BOF carry today 8)



-
Great pictures, RF and Poncho!

Day 17
First order of the day for the Rebar, get the punch pins unstuck; easy peasy!

-
Thanks RF and Juan

Great use and pic, Juan

-
Thank you, Poncho.

Day 17 (part 2)
Black on Black at noon.

-
Nice

-
Thank you Poncho.

Afternoon edit- Red and Black; 'cause that's the spirit!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login