Chuck Yeager (memorial) Challenge 2021
-
Day 18

-
Day 18

-
@ReamerPunch said:
Day 18
Is that your day 18 post?
I'm sorry. I'll just show myself out now. -
@Alan K. said:
Get a sheet of skate board traction tape and make little dots of it with a hole punch. Place as many as you need around the barrel of the pen and voilà, no more slippy pen.
That's a good idea Alan but I'm really torn. I do love the sleek grey Ti look so, yes.... but I can't bring myself to spoil that

The little shuttle badge is held on with lugs through two holes in the cap barrel imperfectly pressed flat on the inside of the barrel. There's not much clearance to the pen barrel inside the cap so it needs a delicate fix. To attempt to refit that I've tried a dab of superglue but it won't hold to the titanium. Any suggestions on that would be welcome

So for Day 18 which probably won't see much Executive action as I'll be out with my bushcraft knife in the fen here's a pic of the pesky shuttle.

-
@comis said:
As much as I like LOTR, that something I could never understand, why 3 books yield a nice trilogy, but then 1 book of prequel turns into 3 movies...I think they are over-juicing the orange, and it's turning bitter sweet...
That's the reason why I didn't watch the Hobbit before. But I wanted to watch something in 3D, so I went for it.I would say the first movie is just as you describe above, with overly lengthy bits (the reunion at Bilbo's place takes forever) and way too many combat scenes just to show off special effects and buy time. But then the story just strays further and further away from the book, and this is a good thing as far as I am concerned. The movie trilogy simply turns into a decent fantasy story set in Middle Earth which is loosely inspired by Tolkien's book, and as such it works quite well imo.
-
@ReamerPunch said:
My Day 14 post is the re-enforcing of the belt loop molle straps.
Spoiler:
Day 14
I thought I'd better re-enforce the stitching of one of the pouches I got. I like the design and capacity, but it's single stitched all around. I'll do the high stress spots for starters.

Looks like one sturdy bag!

@Barry Rowland said:
Day 17: Parcel opening. More coffee inside..I'm easy for Christmas! Coffee or tea or knives :DMy favs too! :D
@FolderBeholder said:
Day 17I always wondered if I could carry a 74mm SAK on a daily basis, but at this point I am really missing my 91mm customized SAK.
I've carried a 91mm the longest.
I have had to dig the Executive out of my dirty laundry basket a few times because it's so light I forget it's in my pocket.That's part reason why I stuff the 74mm into one of those Traditional folding knife slip, less likely I would wash it without knowing.
@FolderBeholder said:
Day 17 bonus entry.Hanging out with the big boy.
True sign of a devoted SAK collector! Respect!

@Alan K. said:
Day 17
All the talk of pencils around here made me want to touch up the tip of my desk pencil. Nothing special, just something that was given away by some business. I don't believe I've paid for a pencil in decades.When I first saw a mechanical pencil, there I thought it was the Terminator for real pencil. What did I know, decades later pencil is still everywhere. :D
-
Wow - great uses and pics again!
Day 18
Used the scissors to open a bag of penne to refill the pasta tub and try to make some room in the kitchen cabinets for Xmas goodies!

-
@McStitchy said:
Day 17/30An apple a day...

Make a good post on MTO... :D
@Fast Bill said:
Day 17I've had a day scribbling away with my Fisher titanium space shuttle* pen. It's a great pen but the Ti is just sooo slippy in the hand. Nothing for the Executive to help either
*the shuttle badge came off
Nice pen! It's only befitting a space pen made out of Ti, nice!

@Fast Bill said:
That's a good idea Alan but I'm really torn. I do love the sleek grey Ti look so, yes.... but I can't bring myself to spoil that
The little shuttle badge is held on with lugs through two holes in the cap barrel imperfectly pressed flat on the inside of the barrel. There's not much clearance to the pen barrel inside the cap so it needs a delicate fix. To attempt to refit that I've tried a dab of superglue but it won't hold to the titanium. Any suggestions on that would be welcome

So for Day 18 which probably won't see much Executive action as I'll be out with my bushcraft knife in the fen here's a pic of the pesky shuttle.
Hmmm....maybe a tiny bit of really strong AB epoxy? I wouldn't want to risk trying to glue it back on without knowing the shuttle stay here it supposed to be, instead of venturing into the black hole within my trousers.
@Simon_Templar said:
That's the reason why I didn't watch the Hobbit before. But I wanted to watch something in 3D, so I went for it.I would say the first movie is just as you describe above, with overly lengthy bits (the reunion at Bilbo's place takes forever) and way too many combat scenes just to show off special effects and buy time. But then the story just strays further and further away from the book, and this is a good thing as far as I am concerned. The movie trilogy simply turns into a decent fantasy story set in Middle Earth which is loosely inspired by Tolkien's book, and as such it works quite well imo.
I think the first two movies of the original trilogy was alright, but remembered slightly dissatisfied how quickly Aragon was able to disband all the enemies with the Army of the dead, and the epic battle of Middle Earth ended literally just like a flush a toilet bowl. But couple years back, I got a chance to watch the Extended version, and it felt just about right.
-
Day 18



Still pretty sick for the entire day and didn't do much as all stuck at home, so I play a little lego with a Viperade organizer I got a little while ago from the big river site.
I remembered having a discussion with one of of us(Echotech? Or RP?) about how one of the versions have 3 pockets(one being a pen pocket) and how I wish they would take that away and make just two large pockets.
I didn't know it was just dumb luck or they were actually listening, but viola, a new version came out a little while ago and now there were just two larger pockets. The larger one could comfortably fit a Mid size MT or even a Swisschamp, the smaller one could fit a 4 layers SAK pretty nicely. The makes it probably one of my favorite production pocket organizers.
-
Still pretty sick for the entire day and didn't do much as all stuck at home, so I play a little lego with a Viperade organizer I got a little while ago from the big river site.
I remembered having a discussion with one of of us(Echotech? Or RP?) about how one of the versions have 3 pockets(one being a pen pocket) and how I wish they would take that away and make just two large pockets.
I didn't know it was just dumb luck or they were actually listening, but viola, a new version came out a little while ago and now there were just two larger pockets. The larger one could comfortably fit a Mid size MT or even a Swisschamp, the smaller one could fit a 4 layers SAK pretty nicely. The makes it probably one of my favorite production pocket organizers.
That's a good review. Hope you feel better soon.
-
@Fast Bill said:
That's a good idea Alan but I'm really torn. I do love the sleek grey Ti look so, yes.... but I can't bring myself to spoil that
The little shuttle badge is held on with lugs through two holes in the cap barrel imperfectly pressed flat on the inside of the barrel. There's not much clearance to the pen barrel inside the cap so it needs a delicate fix. To attempt to refit that I've tried a dab of superglue but it won't hold to the titanium. Any suggestions on that would be welcome

So for Day 18 which probably won't see much Executive action as I'll be out with my bushcraft knife in the fen here's a pic of the pesky shuttle.
There are some metal specific epoxies that should work. I used one to fix a front sight on a shotgun barrel and it never came off.
-
Day 18
More carpet trimming. That dog...


-
@comis said:
I think the first two movies of the original trilogy was alright, but remembered slightly dissatisfied how quickly Aragon was able to disband all the enemies with the Army of the dead, and the epic battle of Middle Earth ended literally just like a flush a toilet bowl. But couple years back, I got a chance to watch the Extended version, and it felt just about right.Oh great, I still have the second disc of the third movie ahead of me and now you spoiled everything by telling me how it ends...
-
Nice kit bag Comis! For Day 18, we're on the road, so it's portable press time.

-
@Fireman said:
That's a good review. Hope you feel better soon.Thanks!

@Simon_Templar said:
Oh great, I still have the second disc of the third movie ahead of me and now you spoiled everything by telling me how it ends...Spoiler
But I didn't give away the part where Smegol was related to Star Wars...

@Barry Rowland said:
Nice kit bag Comis! For Day 18, we're on the road, so it's portable press time.Hope it's a good trip, and always have respect for those whom take their coffee seriously.

-
@FolderBeholder said:
Hanging out with the big boy.Nice display piece! I Imagine it wouldn't work too well in my house, though.
@comis said:
Still pretty sick for the entire day and didn't do much as all stuck at home, so I play a little lego with a Viperade organizer I got a little while ago from the big river site.That's a pretty nice-looking pouch. Hope you're feeling better soon!
More great pics from awl!
-
DAY 18
The Executive doing its morning stretches
Click on picture to see full picture

-
@PitCarver said:
Day 17.
A week from Christmas with nothing to do,
Patch wanted to do a flashlight shot too.Nice pic Pitcarver!

-
@ReamerPunch said:
Day 18Nice pic ReamerPunch!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login