December Rebar Challenge
-
@DavisNikolov said:
Looked at that option but for my situation it didn’t make sense financially. There are rarely, if any, parts for sale within the EU. As you probably know all too well, importing from outside the EU means customs. And around here the procedure is slow and with lots of bureaucracy. I am sometimes willing to deal with customs and import fees if it’s about a cool knife or tool, but not for parts. So a quick search on the bay showed the closest suitable parts to be in Ukraine. Scissors + shipping costing about 21 eur. When I add to that the duty, import fee, the fee of the posts for representing me in front of the customs and the postage from the customs to me … that ends up to about 35 eur. Thats how much I payed tor that Blast on the local used stuff site.I don't remember or don't want to remember what I paid for mine in the end. But I know the feeling of having to pay way more in fees here in the EU and a slow postal service.. I totally get you having two tools instead.. And two tools are twice the fun
[It's not failure if you learn something from it]
-
Day 20 - I needed a 22mm buckle for a leather project but didn't have any and while reading for my toddler I looked at an old bag sticking up from one of the toy boxes.. The buckle had a perfect fit and none of the kids uses that bag to play with anymore so I salvage the hardware and got rid of the rest. Got to use the SE blade, flathead and Phillips, I didn't expect the Phillips to work with that small heads but it did

[It's not failure if you learn something from it]
-
Has anyone encountered an issue with the screwdrivers breaking while using them? I haven't with the Rebar, but the Super Tool 300 I had snapped a straight edge while turning a screw. It was like the casting was defective.
-
So I am walking down the hall and I see my wife looking concerned over the washer banging too much during the spin cycle. Without a word, I stop, whip out my Rebar, and I tighten one of the legs to stop it from banging. As I start to walk off, she says "What, no picture?"

That's a good woman

-
@Barry Rowland said:
Has anyone encountered an issue with the screwdrivers breaking while using them? I haven't with the Rebar, but the Super Tool 300 I had snapped a straight edge while turning a screw. It was like the casting was defective.I have chipped screwdriver bits on a Blast and a PST (I am sure others as well) but not thinking I have on a Rebar or ST300

-
Day 20 of 30
One third the way through and just 10 days left in this challenge :o :ahhh
Not used the Rebar today, I did help demo a door out this morning but only used a hammer
:DI have the stainless Rebar today and it helped with the tree a bit
;) :D
-
Day 20
Rebar helped in the making of its helper!
I used the Rebar to cut and tie the wire used to keep the pliers closed and aligned, while I cut and ground the tip of the needle nose for my new "leatherman disassembly pliers"; needed a 2nd one, as I was over relying on the fixed end of the pivot to loosen the other end. The one on the left is the older one.

-
Day 20

-
@Barry Rowland said:
Has anyone encountered an issue with the screwdrivers breaking while using them? I haven't with the Rebar, but the Super Tool 300 I had snapped a straight edge while turning a screw. It was like the casting was defective.I have ... but with the small flat driver of an MP600! :D
-
@Juan el Boricua said:
Day 20Rebar helped in the making of its helper!
I used the Rebar to cut and tie the wire used to keep the pliers closed and aligned, while I cut and ground the tip of the needle nose for my new "leatherman disassembly pliers"; needed a 2nd one, as I was over relying on the fixed end of the pivot to loosen the other end. The one on the left is the older one.Great job Juan, you did a much nicer and neater job than I did on mine back before the loki tools were available.
[attach id=0 msg=2304379]
[attach id=1 msg=2304379]


-
It must be an MT thing Juan! If I hadn't already been in a challenge this month, I'd have loved to do a Rebar challenge. I might have to give it a go next year!
-
Day 20
[attach id=0 msg=2304381]

-
Many great pics and uses today, peeps

@Barry Rowland said:
The Blast was the other Leatherman I chipped one on.
Thanks Poncho!
-
Day 20:
Kitchen duty


-
@kottskrapa said:
Day 20 - I needed a 22mm buckle for a leather project but didn't have any and while reading for my toddler I looked at an old bag sticking up from one of the toy boxes.. The buckle had a perfect fit and none of the kids uses that bag to play with anymore so I salvage the hardware and got rid of the rest. Got to use the SE blade, flathead and Phillips, I didn't expect the Phillips to work with that small heads but it did
[It's not failure if you learn something from it]
Salvaging parts, nuts and bolts, random metal pieces is something I love to do. My wife don't enjoy me doing it because I've accumulated a lot :D. Because of that I love it even more when I get go use a piece of my "collection" to repair something for the household

**Day 20**Rebar posing with the new bird in the flock

-
@DavisNikolov said:
Salvaging parts, nuts and bolts, random metal pieces is something I love to do. My wife don't enjoy me doing it because I've accumulated a lot :D. Because of that I love it even more when I get go use a piece of my "collection" to repair something for the household
**Day 20**Rebar posing with the new bird in the flock

As long as my wife thinks I'm going to use them right away it's fine cause she does the same. But she does not like it when I just collects "good to have" things. Unless she needs something and I just happen to have it
[It's not failure if you learn something from it]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
