Real Avid Episodes.
-
Episode 8 - Real Avid Gun Tool Pro.
Building upon the success of the Gun Tool, the Gun Tool Pro is a better tool. Real Avid managed to eliminate that cheap plasticky feel of the original Gun Tool, and also managed to add more functionality. Not only that, but there are a few variations of the Gun Tool Pro. I only have this one and the AR15 variant which will have its own episode next.
<a href="https://flic.kr/p/2mSDoQT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768948691_1d2b2c760f_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_061828A by Chako, on Flickr
The top features a spring activated bit storage hatch which improves on the original big time. Also found here is a small slide out magnetized parts storage bin which is a nice touch.
<a href="https://flic.kr/p/2mSECtz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51769189663_04702493ec_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_061904A by Chako, on FlickrThe underside of the tool shows the various hex keys and such. Note how much improved the bit driver is compared to the original Gun Tool.
<a href="https://flic.kr/p/2mSDoMg" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768948481_ba8e132f3b_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_061911A by Chako, on FlickrFeatures included are:
- Two bit drivers on the front and side of the device
- Flap-locked transport compartment for bits
- 9 interchangeable bits: torx, phillips, flat and pin punch
- Allen wrenches: 5/32″, 9/64″, 1/8″, 3/32″
- Scope turret tool
- Choke wrench for 410, 28, 20, 16, 12, 10 GA.
- Tap hammer
- Lanyard loop
- Large and small flat screwdriver
- Fine and ultra-fine metal file
- Clawpoint utility blade
- Removable magnetic storage compartment for screws/bits
<a href="https://flic.kr/p/2mSDoKC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768948386_8a7bbacaa8_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062028A by Chako, on Flickr
Bit removal is far easier on the Pro compared to the original Gun Tool.
<a href="https://flic.kr/p/2mSDoHU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768948286_5bf9343ef1_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062104A by Chako, on FlickrA close up of the tiny magnetic parts compartment.
<a href="https://flic.kr/p/2mSHUED" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51769829465_a9eb1f8691_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062130A by Chako, on FlickrThe included tap area is located on the side.
<a href="https://flic.kr/p/2mSDoFj" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768948136_09f034cc10_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062145A by Chako, on FlickrMy only gripe, which is one the original Gun tool shares, is there is no way to carry the tool short of tossing it in a pocket, or in my case, at the bottom of my range bag. If I had to select the Gun Tool or the Gun Tool Pro, the Pro wins hands down.
-
Yes, they are well thought out, or at least I like to think so. :D

-
Episode 9 - Real Avid Gun Tool Pro AR15.
Here is something I wish they included with the Gun Tool Pro...a sheath. The one included with the AR15 version is very nice.
<a href="https://flic.kr/p/2mSHUBC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51769829290_7286433c14_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062220A by Chako, on Flickr
Included is a little side pouch for your sight adjustment tool.
<a href="https://flic.kr/p/2mSzaXC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768124902_32b8d17a11_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062251A by Chako, on FlickrThe tool follows the shape of the Gun Tool Pro mentioned above, but with a different colour and more importantly, a much different tool loadout specialized for the AR15 rifle.
<a href="https://flic.kr/p/2mSDoBm" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768947906_5545d3a010_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062328A by Chako, on FlickrFunctions included are:
- Carrier scraper
- 9 function bolt/firing pin/cam pin scraper
- Cotter pin puller
- Bolt override tool
- A1 & A2 front site adjuster
- Pin punch
- 8/32 female threaded post
- 2.5'' raptor claw point knife blade
- 1/4'' bit driver
- 1/4'' bit wrench for extra torque
- 11 firearm-specific Torx, Allen, Phillips and flat driver bits
- Tap hammer
- Metal file
- Removable, magnetic storage compartment
- Lanyard loop
- Durable black oxide coating
- MOLLE compatible ballistic nylon sheath
<a href="https://flic.kr/p/2mSDozs" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768947796_70f608280c_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062455A by Chako, on Flickr
Removable magnetic parts storage.
<a href="https://flic.kr/p/2mSzaSn" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768124597_128b701705_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062535A by Chako, on FlickrA closer look at the bit driver.
<a href="https://flic.kr/p/2mSzaR5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51768124522_8e1f782553_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20211223_062607A by Chako, on FlickrWell seeing that I do not own an AR rifle (a good thing as the Trudeau Government placed every known model of the AR ecosystem on the prohibited list), I can honestly say I have never used this one. Mind you, I also have quite a few AR Multitaskers which I have never used and are nested happily in my collection. What I can say is that the Gun Tool Pro is a nice upgrade from the original Gun Tool. The AR 15 is very specific to that rifle ecosystem, and because of that, I think it is rather neat and a good addition to my collection.
-
Well that ends my Avid Tool collection list. It was a great way to kill a morning, and I hope you enjoyed this little expose into some Real Avid offerings. In the Multi-tool world, I find them to be an interesting company. I have field tested a few of their offerings, and those that I have tried, worked great for what they were designed for.
-
I don't own any firearms, so none of these are something I would acquire, but it's always interesting to see tools other than the usual knives, files, saws, screw drivers and pliers.
Nice write up. -
I love these things and occasionally wonder how much I'd use the GT Pro, Max or Pistol Tool instead of a SAK or MT... but since I don't even own any firearms here, it seems a bit of a waste.
I do wish more MTs would feature decent 14" bit driver...@Chako said:
My only issue with this tool is how to carry it. If they had included a carabiner with this one, I think it would be perfect. As it is, I tend to hunt for this one at the bottom of my range bag, and having it hanging off a strap would make it easier to find when you need it. I have used a D ring strung through the 1911 bushing wrench, but find that a bit awkward for my liking.Get a spare pistol mag holster (or increase your existing capacity model by one) and slot it in there?
It's supposedly designed for them anyway, though seems to presume you're CCing something that takes at least 15rnd double stack magazines... -
Great thread, Chako

-
We are only allowed 10 round magazines in Canada.

-
@Chako said:
We are only allowed 10 round magazines in Canada.

So... a Glock 17 that could hold a 17rnd mag, but using mags modded to only take 10?
I'm assuming mags fitted with a round limiter are still the same dimensions?I couldn't find any measurements for the Pistol Tool, but I presume it's roughly as fat as the other models look?
-
About right. In Canada, magazines are usually made with a thicker base to limit the number of rounds you can carry in a magazine. Yes, the magazines are of the correct dimension to fit the handgun. If I am not mistaken, I think California in the US have the same laws.
-
Those are awesome! Thanks so much for taking the time to put this thread together!

-
You guys are welcome.
-
Interesting tools !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
