kamakiri's Former Lurker / New Member Intro (long read)
-
Excellent work, Kamakiri!

-
Thanks guys!I still have to decide if I’m going to assemble this one as shown. Other options for this knife are to flip the orientation of the 74mm scissors or switch to 91mm ones with the hook, or do another spring for the no hook 91mm.
The small advantage of this orientation is that the exposed profile of the scissors completely fits within the profile of the main blade when closed. Bad part is that those two nail nicks are pretty close.
:-\ Decisions, decisions.
-
That looks great, Kamakiri!

-
@Rizio Il Ghiro said:
That looks great, Kamakiri!

Thanks, Rizio!

The reality is that I put in two tools that needed a lot of sharpening! The Serrated Recruit was the worst of the ones I had in the donor box. The 74mm scissor came from a well used money clip that I needed for something else a while back. Serrated blade was just completely dull in the 3 teeth toward the tip. Lots of bends at most of the tips of the teeth. So the factory grind had to go completely, which I hate doing. Scissors are done, but gonna take me some time to get the blade where I want it for a user.
-

Boom. The hard part is done!
Best part was not breaking or shattering anything to do it!



-
And with its neighbor…

-
No knife time yet today, but test fit going okay yesterday.


-
Made this today for my oldest.
Just the magnifier and a modded UV LED, GITD on the front.
Spy Kid Decoder:

-
Nice work again, Kamakiri!

-
Thanks, guys! Helped make for a Happy Christmas in the Kamakiri household! Totally worth the effort. :) -
Happy New Year!


-
Also in blue + glow, this time on a Huntsman Lite.


-
OK, those are both beyond cool.

Does the shield light come on with the flashlight? Or are they switched separately?
-
@SteveP said:
OK, those are both beyond cool.

Does the shield light come on with the flashlight? Or are they switched separately?
Thanks SteveP!

I wired the Huntsman (blue) with the module switch to come on in two steps. Press for the module light and lock on for both.
The red one is wired so you lift the module out and squeeze it like the moment switch style on a Photon.
Brief (easy way) ‘how to’:
Need (arguably) LED string 2-wire insulated
Remove scale(s)
Figure out where you want pass-thru, and drill.
Sand or file two ends of LED lead wires
Drill module case
Wires on mine were about 0.4mm each. I drilled 1.0mm and 0.9.mm.
Thin LED height. Mine are about 2.3mm tall and I reduced to ~1.8mm
Pass wires thru frame. test polarity of wires and mark. I used red sharpie for +.
Pass wires into module case. Hookup and test.
Locate and epoxy LED to scale plug or secure in pass thru hole with epoxy. Epoxy not ‘required’ but good practice so wire insulation doesn’t rub thru and short.
Glow epoxy scales or liner or LED.
Reattach scales. Epoxy shut if desired for water or dust resistance
Showed my siblings and even one of my sisters wants two.

I was doing a full hidden wire and ‘clean’ install when I realized I could do it this way and complete like 3or 4 in an hour. Lots of ways to do the electrical too…even to squeeze way more LEDs in if desired.
-
Beyond cool 💯!!
-
Thanks, Barry!
Talked to the sister who wants the same mod today. It’ll be a Huntsman Lite with the only change of a magnifier instead of the in-line Phillips…maybe a serrated main. 2nd knife will be like the Yeo-kiri earlier in this thread, but added Metal saw + chisel.
Gonna spec nephew’s knives after he uses my sister’s knives.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


