December Rebar Challenge
-
Day 27 - not the fanciest job but it had to be done. Restocking toilet paper

[It's not failure if you learn something from it]
-
Nice pictures and uses today, people, liking them!

Thanks, Rich!

Good combo there, Davis: a pair of pliers for bolt and nut; pliers and drivers for screws and nuts, a sturdier PE blade for heavier duty cutting, and a bit holder for any needs from a specialty driver. All in an easy to carry format, and looks classy to boot!

-
Day 26
My wife bought some puzzles for our grandson, and they have been a big hit with him.

-
Day 27
I tried to include Snickers in the picture, but she wasn't having any of that!

-
Merry Christmas to all you Rebarers, I carry a Rebar as part of my normal go to organiser and it came out today. I discovered that my mother's oven was not only not mounted to the counter, but the handle was loosely swinging from the only side it was attached to. They had tried and failed to fix both issues, but the Rebar's 3D Phillips did not, quickly found the recessed screw that had come undone for the handle and tightened the still attached side, then shunted it over a bit and drove a woodscrew into a more solid bit of counter to secure it:


-
@Rich_SD said:
This one needs a pocket clip from a BO Kick ;)
I would but I don't want to take my BO Kick apart for the pivot and it's clip
:D@Juan el Boricua said:
Nice pictures Zephon and Poncho (although I like both, I prefer the Yin one; dark outside but shiny inside)

Depends on my mood but mostly I do prefer the BO handled one more

So many great pics today, everyone :o :ahhh

-
Not at a price I will pay though

-
Day 28
December 28
OMG it’s almost 30 days since we started this challenge!
I want to talk about scissors. This is what started my Rebar adventure in the first place - the mod to attach scissors to it. Today I used the scissors to snip off those nylon tags on new shirts (gifts during Christmas). I was thinking “there’s got to be more use for Rebar scissors than just cutting tags”. In more than one occasion I found myself needing bigger or more cable scissors. It’s like if the job needed a Rebar then hope you have Rebar-sized scissors as well. Before I attached the pocket clip, I was very close to exchanging the scissors for a Wingman package opener.
I haven’t carried the Wingman for a long time already so I still can’t totally comment on the scissors. For the Rebar, cutting something above the weight class of the scissors forces it to “miss-fire” ie overlap with its spring. I can cut paper, cardboard, but think twice about thicker zip ties.
Not sure if it’s a pivot issue where I found a sweet spot when I tightened the pivot of the tools — I have the right amount of clumping but not so tight as to bust fingernails when accessing implements.
Anyway, as an all-in-one go-to tool, yes, the Rebar will still need those scissors for small, precise cuts. It’s about the same reason on why there’s an eyeglass screwdriver in a Wave, I guess. It’s for small, precise jobs.

-
Hello day 27.
Bit late as usual
Twas a long hot day putting up tents for camping. I got a tad thirsty.
Problem solved


-
Hello for day 29.
Nearly done.
Today was box opening time for blow up beds . The joys of camping when the woman
folk beds go flat in the night. It can turn a man to the bottle. :D


-
December 28
OMG it’s almost 30 days since we started this challenge!
I want to talk about scissors. This is what started my Rebar adventure in the first place - the mod to attach scissors to it. Today I used the scissors to snip off those nylon tags on new shirts (gifts during Christmas). I was thinking “there’s got to be more use for Rebar scissors than just cutting tags”. In more than one occasion I found myself needing bigger or more cable scissors. It’s like if the job needed a Rebar then hope you have Rebar-sized scissors as well. Before I attached the pocket clip, I was very close to exchanging the scissors for a Wingman package opener.
I haven’t carried the Wingman for a long time already so I still can’t totally comment on the scissors. For the Rebar, cutting something above the weight class of the scissors forces it to “miss-fire” ie overlap with its spring. I can cut paper, cardboard, but think twice about thicker zip ties.
Not sure if it’s a pivot issue where I found a sweet spot when I tightened the pivot of the tools — I have the right amount of clumping but not so tight as to bust fingernails when accessing implements.
Anyway, as an all-in-one go-to tool, yes, the Rebar will still need those scissors for small, precise cuts. It’s about the same reason on why there’s an eyeglass screwdriver in a Wave, I guess. It’s for small, precise jobs.
I have very much the same experience with the Leatherman scissors in this design
I usually use SAK scissors for this reason and as you said they will only cut certain things
I have become accustom to this and usually try not to cut anything that I think will cause them to mis-fire
:DThe Rebar is pretty solid to me with all of its normal tools though and I can comfortably use the rest of the tools on it without much if any worry

-
Day 28 of 30
Just a stainless Rebar today
:D

-

@Pauldmmwc said:
Hello day 27.
Bit late as usual
Twas a long hot day putting up tents for camping. I got a tad thirsty.
Problem solved

-
I forgot to post again last night - Christmas vacation has thrown off my routine! :ahhh

-
Day 28 - more snow! But that makes the night brighter and the temperature to rise. We have been having around -11 degrees Celsius for a couple of days but not it's around 0

[It's not failure if you learn something from it]
-
Day 28:
Sharpened a pencil for the kiddo


-
@Juan el Boricua said:
Good combo there, Davis: a pair of pliers for bolt and nut; pliers and drivers for screws and nuts, a sturdier PE blade for heavier duty cutting, and a bit holder for any needs from a specialty driver. All in an easy to carry format, and looks classy to boot!
I do realize the potential such combo has but it's a bit overkill for my current lifestyle - all day in the workshop, with an occasional walk around the city with the wife and kid. I often don't need even one of them :D So today I decided to accompany the Rebar with something else
**Day 28**Today the Rebar rode on the belt. In pocket I took a congress pattern Rough Rider. Great little knife, I like it a lot.

-
Day 28 (T -2)
Not much went on so, light duty was iT; letter-opening with the CT.

-
Lots and lots of great pics and uses today, peeps


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login