Let me see your homemade sheaths!
-
Here is another I made for my father


[It's not failure if you learn something from it]
-
My first knife sheath. Not perfect but good enough I reckon.
264167572_332560701700905_7926149126868685566_n by juan pedro almeida, en Flickr
266521168_1543185329407267_5929133474183031855_n by juan pedro almeida, en Flickr -
I think it looks really good
[It's not failure if you learn something from it]
-
@kottskrapa said:
I think it looks really good[It's not failure if you learn something from it]
+1
Like the knife design, too!

You could wet mold it to give more retention to the knife.
-
Thanks!
@pfrsantos , the knife is from 2medc. Mercury knives is about to make production versions of some of his designs -
@Jpac said:
Thanks!
@pfrsantos , the knife is from 2medc. Mercury knives is about to make production versions of some of his designsCheers! I bet that wood handle will get a nice patina with time.

-
Had a couple of small leather pieces around. If I stitched both together, it would make a very small pouch, not big enough for any "decent" EDC knife. I was thinking about getting a pouch for carrying my Executive or Director without scratching the scales with other pocket carry (coins, keys).
So, I got a thin strip of leather (about 1cm wide) and used it to stitch the two other pieces together. It had a longer end (didn't knew where to cut it exactly), so I used it to make a loop, with the top of a paper clip.
It carries up to a Farmer. Tried the Farmer X, but it was a stretch...





-
Here's its usual setup, with the paracord "chain" I made some time ago. It's great to get it out of the pocket.
The loop stitching is terrible, but I try to think of it as my first try. Hope I get the next one better.


-
Nice and functional
[It's not failure if you learn something from it]
-
I finally tried to make a wet molded sheath. Turned out nice enough -at the second try. The leather I used for my first try was too thin so it didn´t provide a good retention. On the second one I used thicher leather and the retention is really good.
IMG_20220113_134305~2 by juan pedro almeida, en Flickr -
That sheath is excellent. Well done.

-
@zoidberg said:
Looked through your pics... nice gears, did you make any of that jewellery?Thanks for looking and glad yuo liked it!

I made all of it. Jewellery was the first kind of stuff I started making.Thank you! It only took me two tries to make it -the leather I used for my first try was too so the retention was weak
-
@Jpac said:
I finally tried to make a wet molded sheath. Turned out nice enough -at the second try. The leather I used for my first try was too thin so it didn´t provide a good retention. On the second one I used thicher leather and the retention is really good.
IMG_20220113_134305~2 by juan pedro almeida, en FlickrWell done!

Hint: first wet mold the leather, only stitch it together afterwards. This prevents warping.
Looks like you did it this way.

-
I finally got round to ordering some new leather and making a new belt pouch. Specifically for a 3-4 layer SAK with the required additional thickness over my previous pouch. It's a horizontal pouch which is my preference, over built but then when you see the old version of this pouch (last pic) which has been on my belt almost every single day for 5 years (holy leather patina batman!), you can see why I like to build them strong! I built it a bit more simply than the previous one which had high end Horween leather, a fancier X stitch and had a smooth leather interior for an easier slide in and out but this one was me trying to work out if I still remembered how to make this model and I used a simpler Crazy Horse leather, simpler stitches, etc. It's not perfect by any means but it's more than sufficient till I have the energy to do it again in Horween with the posh stitching.




-
@pomsbz said:
I finally got round to ordering some new leather and making a new belt pouch. Specifically for a 3-4 layer SAK with the required additional thickness over my previous pouch. It's a horizontal pouch which is my preference, over built but then when you see the old version of this pouch (last pic) which has been on my belt almost every single day for 5 years (holy leather patina batman!), you can see why I like to build them strong! I built it a bit more simply than the previous one which had high end Horween leather, a fancier X stitch and had a smooth leather interior for an easier slide in and out but this one was me trying to work out if I still remembered how to make this model and I used a simpler Crazy Horse leather, simpler stitches, etc. It's not perfect by any means but it's more than sufficient till I have the energy to do it again in Horween with the posh stitching.



Nice one! Can't beat horizontal carry, my preference is slightly tilted. But I love the looks of the old worn one
@Jpac said:
I finally tried to make a wet molded sheath. Turned out nice enough -at the second try. The leather I used for my first try was too thin so it didn´t provide a good retention. On the second one I used thicher leather and the retention is really good.
IMG_20220113_134305~2 by juan pedro almeida, en FlickrWet molded looks so nice, it's sometimes hard to find the right thickness to let it have retention but still form nicely. Good work
[It's not failure if you learn something from it]
-
POMs the old leather sheath looks amazing all patina'd. I'm sure the new one will serve you just as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
