The Hacked Leatherman Owners Club.
-
Yeah I don't think I've ever actually used a multitool for any real cranking with a lot of torque. It's always just been about convenience. If I really have to lay the strong arm on something I go get the real tool. I have a 1 year old so there's a lot of recessed screws on toys I contend with that the 2d bits can't quite reach. And as I didn't have any old PST drivers or any thinner compatible ones lying around I just said hell with it. Let the hacking begin lol
-
@DirkDiggler65 said:
EXACTLY! As soon as I said SuperSurge in my head I was thinking "there's no way that couldn't have been done". Just on sheer principle lolI guess the pickle you'd find yourself in is which surge handle do you take? As each one has a unique tool. Do you take the T-shank? Undeniably one of the most versatile additions ever added to a MT in my opinion. Or the best scissors ever put on a multitool? Because if the locking mechanism is identical to the wave I don't think you can have both.
Made one a while back.
Started with the t-shank Surge side and Surge scissors in the ST3 side.
Eventually missed my ST3 too much so swapped that side out for a Core handle. -
@zoidberg said:
Made one a while back.
Started with the t-shank Surge side and Surge scissors in the ST3 side.
Eventually missed my ST3 too much so swapped that side out for a Core handle.Yeah that's kinda where I'm at with the wave/rebar Half n half. As soon as you drop down to 5 tools in the rebar Half it's almost like what are you gaining other than smaller serated and saw. The thing I do like is the weight factor. I feel it's noticeably lighter and feels a little more compact. So I'm gonna roll with it for the time being.
You know of a way to put both wave blades on the same handle and not having the serated blade wobbling? I miss my long wave serated blade. I could live with losing the diamond file if it meant getting my big cutter back.
-
Have used a gas torch and hammer before, first time was a bit messy but the second looked a lot better.
If I needed it to look super clean I would try JB Weld or something similar.
You could build up the blade where the liner engages or the back stop area just behind the jimping.Or you could cut/bend/build up where the handle stops the blade so it engages earlier.
And then there is bushing the pivot hole and drilling another just forward slightly. -
@zoidberg said:
Have used a gas torch and hammer before, first time was a bit messy but the second looked a lot better.If I needed it to look super clean I would try JB Weld or something similar.
You could build up the blade where the liner engages or the back stop area just behind the jimping.Or you could cut/bend/build up where the handle stops the blade so it engages earlier.
And then there is bushing the pivot hole and drilling another just forward slightly.Yeah I like idea of just building up the backstop a tiny bit. But just wanted to use something strong enough that it wouldn't break with a little pressure added. Metal work is not something I have experience with. Wood working sure. Metal is gonna be the frontier I'll find myself venturing into in the next couple years I imagine.
Thanks for the advice
-
This slim wave mod was done a while back. Some more tinkering since its the week end.
Added ST plain blade, sanded out the groove on the lock tab, milled down a set of wave screws for aesthetic.





-
Great work as usual Sam !

-
That looks amazing Sam, well done!

-
Yeah man! That's some pretty stuff right there. BTW my OG Wave finally arrived a week or so ago. Fell in love immediately. Felt so much more compact and streamlined. A lot less clunky. And then . . . . . (queue up horror movie score)
I realized that is was suffering the very common loose handles problem they seem to have. Broke my heart. I then set out to fix the issue. Had to order the damn specialty drivers required to take it apart. And I tried tightening up the handles to grip the plier head better. I used the vise method from previous threads. It worked for a little. Then the rattling started again. On the second attempt to tighten it I heard the sound. The sound I've only heard others on here speak of. The ever dreaded CHINK. Boom broken handle lol gonna see if leatherman will swap it out for a freshy. If not I'll prolly end up gutting the tools for other salvaging projects. Lesson learned lol
Happy modding New Year all
-
Awesome work, Sam

Awesome work fitting in extra tools as well 8)

-
@DirkDiggler65 said:
Yeah man! That's some pretty stuff right there. BTW my OG Wave finally arrived a week or so ago. Fell in love immediately. Felt so much more compact and streamlined. A lot less clunky. And then . . . . . (queue up horror movie score)I realized that is was suffering the very common loose handles problem they seem to have. Broke my heart. I then set out to fix the issue. Had to order the damn specialty drivers required to take it apart. And I tried tightening up the handles to grip the plier head better. I used the vise method from previous threads. It worked for a little. Then the rattling started again. On the second attempt to tighten it I heard the sound. The sound I've only heard others on here speak of. The ever dreaded CHINK. Boom broken handle lol gonna see if leatherman will swap it out for a freshy. If not I'll prolly end up gutting the tools for other salvaging projects. Lesson learned lol
Happy modding New Year all
Sorry to hear about the OG Wave :ahhh :ahhh :ahhh Leatherman probably won't have the stuff to fix it but you never know
if not I hope you can salvage for parts 
-
@Poncho65 said:
Sorry to hear about the OG Wave :ahhh :ahhh :ahhh Leatherman probably won't have the stuff to fix it but you never know
if not I hope you can salvage for parts 
Yeah I've read because it's such a common problem with the original wave that they usually just swap it out for a new wave, and don't even muddle with it. And if not, no big deal, it's only a hairline crack. Some JB weld would probably solve it. And I also think I know what causes the wobble issue. Was gonna fix it up proper but decided to give the vise trick one more go. But that's what I get for taking shortcuts lol
-
@DirkDiggler65 said:
Yeah I've read because it's such a common problem with the original wave that they usually just swap it out for a new wave, and don't even muddle with it. And if not, no big deal, it's only a hairline crack. Some JB weld would probably solve it. And I also think I know what causes the wobble issue. Was gonna fix it up proper but decided to give the vise trick one more go. But that's what I get for taking shortcuts lolThis actually happens quite often when messing with the tightness of the handle. I have zero experience with JB weld but I doubt it will hold. That part that broke handles alot of pressure when using the pliers. The OG waves there are 2 versions. The newer ones have spring behind the pliers, that helps alot with the wobble and looseness.
-
@Sam Lim said:
This actually happens quite often when messing with the tightness of the handle. I have zero experience with JB weld but I doubt it will hold. That part that broke handles alot of pressure when using the pliers. The OG waves there are 2 versions. The newer ones have spring behind the pliers, that helps alot with the wobble and looseness.Yeah I figured worst case I end up with some decent parts. I think the main issue stems from the fact that the plier pivots are rounded at the bottom. Rounded and pressed up against the flat inside of the handle. I'm no machinist but that seems like an obvious oversight in design. Flat plier pivots give you greater support against lateral twisting I'd imagine
-
Dual Color ST300


-
Charge Ti Knife


-
Thanks Dirk
I am carrying this one with me everywhere
I carried the Al version with me daily until I made this one 
-
Both sides of my Charge Ti knife



The "Titanium" side is where the clip is normally

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
