What did you use your Sak on today?
-
I do use the pocket victorinox sharpening rod/pull thingie, and I quite like it ! Even for non victorinox knives, I start with the rod, then give a few passes on the pull part, and it's shaving paper like it's out of the factory. :ahhh
-
@Lemonizer said:
I do use the pocket victorinox sharpening rod/pull thingie, and I quite like it ! Even for non victorinox knives, I start with the rod, then give a few passes on the pull part, and it's shaving paper like it's out of the factory. :ahhhThanks I'll continue to try mine.

-
For the free hand section apply a little sharpie to the bevel, that'll help you get the angle right.
If you don't like sharpening then really the best thing for it is to keep on top of your blades, a couple swipes at the end of the day on the inside of a leather belt (or actual strop if you like) and every now and then put then through the ceramic pull through on the Vic sharpener.
-
@GearedForwards said:
For the free hand section apply a little sharpie to the bevel, that'll help you get the angle right.If you don't like sharpening then really the best thing for it is to keep on top of your blades, a couple swipes at the end of the day on the inside of a leather belt (or actual strop if you like) and every now and then put then through the ceramic pull through on the Vic sharpener.
thanks again ! I do use the inside of a belt, hook the buckle on my toe LOL
I agree a quick swipe every day works

-
I'll have to give mine another go, too. My bad luck was likely due to user error.
-
I'll give a +1 for the Vic pull-through sharpener. I'll add that I'm a complete novice at sharpening, but the pull-through has put some good edges that slice paper back on some used knives that I've picked up.
I've never had to mess with the ceramic rod part. Been lucky that I haven't had a blade that messed up.
I don't put much pressure on the sharpener when I pull the blade through so it's taken 20-40 passes to get a good edge sometimes.
I'll admit that the main reason I got it is that's it's angled for the factory grind on the blades, so very simple to use.
-
@nakken said:
I use a Work Sharp GFS on all my knifes, really satisfied with it. ::)I should probably add that the Vic was a lightweight solution for touch ups, if someone is looking for a more intensive system then something else will probably be needed.
I've gone from a Lansky Turnbox to a Spyderco Sharpmaker to my current set up: A Wicked Edge Pro with Vic sharpener for the light stuff.
-
So today I used the Bantam to open my tester, which appeared to be negative. Stay safe people


-
-
I use a lot of SAK tools for SAK mods. Yesterday the list is pretty long for just the modding:
Pliers - pull and cut wires.
Tweezers - grab small quantity of glow powder, move wires
Fish scaler - also push wires
Metal Saw (stainless) - cut cellidor and file misc parts that needed clearance
Awl - make or clean or pilot holes in things. Brass, aluminum, plastic.
Watch case opener - the less likely to scratch pry bar.
Toothpick - glow material and epoxy mixer, applicator, spatula -
@SteveP said:
I've never had to mess with the ceramic rod part. Been lucky that I haven't had a blade that messed up.I wish I could say the same. My white Rally was incapable of cutting paracord when I received it. Much work on the ol' pull-through sharpener (on both the carbide and ceramic) was necessary with that one...
-
Used the straight pin in my Compact to clear a clog in the nozzle of a plant food bottle. It was a heroic effort.
-
@Farmer X said:
I wish I could say the same. My white Rally was incapable of cutting paracord when I received it. Much work on the ol' pull-through sharpener (on both the carbide and ceramic) was necessary with that one...Good to hear that you fixed it.
I did have a pair of scissors on an Explorer that were badly messed up. Used a diamond file and Felix Immler's video to re-edge them.
-
Well, not really me and not my SAK but my youngest got a garage this Christmas and every gate has its own key. She did it her own way with her toy SAK. She wasn't strong enough to do it but I tried and the SAK worked for them all. The pic has bad lighting and are blurry but we all know hos toddlers change focus so I has to be quick

[It's not failure if you learn something from it]
-
That's awesome kottskrapa! Truth be told, my father was the reason I got into knifes and multitools. It's funny seeing an aspiring SAK fan :D
-
The new normal ::)
Going out for a meal with Mrs Surge and friends

The Bantam will be there but, as it's central London, I doubt I'll be getting it out
(depends on the
)
-
Same here, both my mom and dad was and still are SAK users
[It's not failure if you learn something from it]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

A more common use than it should be ::) But excellent news on the result