Rev Owners Club.
-
Counts for me :)
Sent from my LG-SP200 using Tapatalk
-
A saw, especially a good one, is my favorite MT tool. And I have fallen in love with MT scissors.
-
Very awesome toolset on that one :o Makes me want to get a Rev now
:D -
You will also need a spare Wave or Multiforce to get that toolset. And install a tool stop inside the frame to keep the tools from falling too far down.
That one will be in my pocket for a while as soon as the Delemont challenge ends ;)
-
I have spare Wave parts and a Multiforce
just not sure how to install a frame stop
:D -
Jam a piece of brick in there. Use a little mortar if it rattles around :D
In my case, I glued some rubber pieces in the frame. It does not looks the best, but it is for personal use. If I ever decide to give it away, I can change the stop out for something more appealing.
-
I dig it
If I try the mod in the future I may have to see some pics of the inside ;) :D -
I will post some details tomorrow in my thread in the Mod sub forum.
-
Time to join the club!
I never had any intention of owning a Rev. I felt that it was a cost cutting exercise or someones Six Sigma certification project on cost reduction. My interest was renewed when I learned that the Rev plier head is totally different from that of the Wingman and Sidekick’s. I hate pliers that cannot cut wire properly, heck they can’t even cut bamboo skewers properly! Then I thought of the Rev. I learned that the plier head of the Rev isn’t a drop-in for the Wingman/Sidekick. So back I go to the Rev. What if I made a Rev with scissors and bit changer?
Here I go buying a second hand Rev - it arrived yesterday in all its rusty stained glory. To the credit of LM, an overnight soak, sandpaper and WD40 work wonders on their product. All I had to do was re-assemble it…..and figure out which washers go where

Finally, here’s my Rev. Hopefully I assembled it correctly

Will I still mod it? Well, the parts will cost as much as the tool itself so….maybe not just yet. Upon handling the Rev, I got an appreciation on the possible thought behind the tool. The implements fit the concept of the tool properly (except for the file which is still unforgivable). I have to say that it’s a GREAT lightweight tool that carries just like a SAK with an OHO blade.

-
@Zephon said:
Time to join the club!I never had any intention of owning a Rev. I felt that it was a cost cutting exercise or someones Six Sigma certification project on cost reduction. My interest was renewed when I learned that the Rev plier head is totally different from that of the Wingman and Sidekick’s. I hate pliers that cannot cut wire properly, heck they can’t even cut bamboo skewers properly! Then I thought of the Rev. I learned that the plier head of the Rev isn’t a drop-in for the Wingman/Sidekick. So back I go to the Rev. What if I made a Rev with scissors and bit changer?
Here I go buying a second hand Rev - it arrived yesterday in all its rusty stained glory. To the credit of LM, an overnight soak, sandpaper and WD40 work wonders on their product. All I had to do was re-assemble it…..and figure out which washers go where

Finally, here’s my Rev. Hopefully I assembled it correctly

Will I still mod it? Well, the parts will cost as much as the tool itself so….maybe not just yet. Upon handling the Rev, I got an appreciation on the possible thought behind the tool. The implements fit the concept of the tool properly (except for the file which is still unforgivable). I have to say that it’s a GREAT lightweight tool that carries just like a SAK with an OHO blade.
Nice modding, Zephon

Funny that only that Rev and Leap share the same plier head :o and of course the Leap is no longer in production :'(
I don't have a Rev myself but if I ever come across one for a good deal, I am sure, I won't pass it up
:D

-
You can get it for $49.95 at https://www.leatherman.com/rev-832127.html
I would not want you to miss out on this great deal



-

I believe I will pass
I remember seeing these at Lowes for less than $20 when they first came out 
-
I did like the plier head on the Leap. I didn't know it was shared with the REV.
Get a used one Poncho. The price of all Leatherman tools have gone up, but you can still find them used at a reasonable price. -
If you can get one for a 20 or so then I suggest you take it.
I’m gonna admit at I’m quite enamored by the Rev. It’s like a Skeletool with add-ons. It carries very thin and very light. It’s functions feel that you’re using a Spartan SAK.
The Rev will probably go well with a Compact or Climber or Explorer. That’s enough to cover most bases with redundancy. Though at the end of the day, it the Rev that I find sitting alone in my pocket.
-
Here’s something amusing this morning:
I have a kitchen towel/tissue that I twisted up really tight. Then used the Rev pliers to cut it.
The Rev cut it beautifully.
My Wingman and Sidekick are jealous.
-
It appears that Home Depot will no longer be carrying Leatherman products. When checking to see if the prices for Leatherman MTs had gone up $10 at the HD web site, I saw that no Leatherman MTs were available, and there was no reference to the Wave+ and the Rev, which are sold in HD stores. So, while in a local HD today, I saw that they had reduced the price for the Rev to $19.99. Lucky for me, they had one left:

No Waves were available, which is no surprise. Much of the time this store had none anyway.
-
Great catch, Adam

-
Thanks buddy!

-
I checked a couple more HDs, and this is what I found:

I congratulate anyone who was able to buy a Wave+ for $50.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
