Toolbox Challenge - January 2022
-
Southwire sells electrical products and tools. That particular knife has a D2 blade, which holds an edge pretty well but is only semi-stainless. Hence the BO treatment. They also sell it with drop point, hawkbill, and tanto blades
I need to get a couple more myself in case they quit selling it.
-
@Adam5 said:
Southwire EdgeforceSouthwire sells electrical products and tools. That particular knife has a D2 blade, which holds an edge pretty well but is only semi-stainless. Hence the BO treatment. They also sell it with drop point, hawkbill, and tanto blades
I need to get a couple more myself in case they quit selling it.
The sheepsfoot is what makes it extra cool to me
Thanks! -
Finally! I'm at a real computer again!
- ReamerPunch
- Adam5
- Echotech
- Fireman
- Fuzzy (thinking about it)
- Rich_SD
- Alan K. (maybe)
- Poncho65
- m47mu74nt
- Jothra

I happen to know I can get by with nothing in my pockets, as long as I have home advantage. For a variety of reasons I'd rather not get into, however, it's all me at work. If any of a million little things at work need doing, it will be me doing them. So here's my approximate, fluid loadout for the challenge:
Also pictured: the thing what's getting replaced!Clockwise from left:
[list type=decimal]-
The bladeless Free P2 I've been carrying lately. This is what I'm replacing with dedicated tools for the rest of the month.
-
My trusty stainless steel multi-driver. This was a Christmas gift in 1996. It's seen things both terrible and wonderful.
-
My Knipex Pliers Wrench XS. This thing is a minor miracle. The band holding the handles shut is from an old TPU watch strap.
-
My Spyderco Dragonfly 2. At school, this will likely get swapped out with a Spyderco Roadie. Also, whenever I feel like it, I may carry a Grohmann folder instead.
-
Scissors ripped from a donor Swiss Army Knife. I'll probably use proper scissors at work, but these ones will live on my keychain, so I can attack my fingernails when necessary.
This should be everything I need, but if not, tools abound in nature.
-
@Jothra said:
Finally! I'm at a real computer again!- ReamerPunch
- Adam5
- Echotech
- Fireman
- Fuzzy (thinking about it)
- Rich_SD
- Alan K. (maybe)
- Poncho65
- m47mu74nt
- Jothra

I happen to know I can get by with nothing in my pockets, as long as I have home advantage. For a variety of reasons I'd rather not get into, however, it's all me at work. If any of a million little things at work need doing, it will be me doing them. So here's my approximate, fluid loadout for the challenge:
Also pictured: the thing what's getting replaced!Clockwise from left:
[list type=decimal]- The bladeless Free P2 I've been carrying lately. This is what I'm replacing with dedicated tools for the rest of the month.
- My trusty stainless steel multi-driver. This was a Christmas gift in 1996. It's seen things both terrible and wonderful.
- My Knipex Pliers Wrench XS. This thing is a minor miracle. The band holding the handles shut is from an old TPU watch strap.
- My Spyderco Dragonfly 2. At school, this will likely get swapped out with a Spyderco Roadie. Also, whenever I feel like it, I may carry a Grohmann folder instead.
- Scissors ripped from a donor Swiss Army Knife. I'll probably use proper scissors at work, but these ones will live on my keychain, so I can attack my fingernails when necessary.
This should be everything I need, but if not, tools abound in nature.
Welcome aboard, Jothra

-

Birthday! Joy!I used the knife for knifey stuff. That's pretty much it, actually. So here's a picture of my loadout, only with the scissors in their temporary home on my keychain.

That weird socket thing is for my locking bike skewers. Please disregard. -

Not currently on my keychain but always around is my Bosch + Lomb 14x hand lens. It's a little small, but has exceptional lens quality. The one downside is it doesn't use bolts to hold the lens inside the handle. Instead, it's a kind of peened pin. So what to do when it's loose? You don't want to smash a magnifying glass with a hammer.
Pliers Wrench to the rescue!

The mechanical advantage of the Pliers Wrench is insane, so this worked marvellously.
Give 'em the clamps! -

Day four was another day of ordinary cutting, slicing, and snipping, and not much screw driving, pinching, or prying. So instead, here's a breakdown of my quarter-of-a-century-year-old multi-driver.

I don't think my grandparents expected this one to be such a winner.The body of the driver holds four bits, which are held in place by a plastic spacer (shaped like a straw) that runs along the length of the handle section. I can fit two more bits in the main and extender barrels. It came with two slot bits and two Phillips bits, so I dropped the least-used slot bit, and threw two Robertsons in there instead. Normally they would be #2 and #3, but I switched out for a #1 for a recent project, and forgot to switch it back. #2 is by far the most common, anyway. The slot bit is...I don't know, flat? The Phillips are #1, #2, and #3.
-
:ahhh
Jothra is here!
Welcome aboard! That screwdriver is awesome!
-
-
This is all of us, right?

- ReamerPunch
- Adam5
- Echotech
- Fireman
- Rich_SD
- m47mu74nt
- Jothra
-
@ReamerPunch said:
The current list looks nothing like that one. A few members had to bow out.I had so much trouble finding a list at all, consarn it!
@ReamerPunch said:
Welcome aboard! That screwdriver is awesome!I've had it since a week before I turned 16. You can do the math if you really want, but the important part is it was a stocking stuffer for the ages.

I was going to make a big deal about needing a can opener for ravioli at supper, wah, wah, wah, but three important facets of the situation took the wind out of my sails., First, I almost always use my purpose-made Swing-A-Way in the kitchen anyway. Second, canned ravioli comes with a pull tab.

Third, I ended up having third-rate sushi instead.The Dragonfly 2 opened an Amazon package.

It's dangerous to go alone! -
Now that's a stocking stuffer!

Kinda looks like a mini picquic, but who knows what it is. I wonder if it has a lifetime warranty.
:DThose pull-tab cans will come in handy for the 30-Day Meat Hooks Challenge. :D
-
@ReamerPunch said:
Now that's a stocking stuffer!
Kinda looks like a mini picquic, but who knows what it is. I wonder if it has a lifetime warranty.
:DThose pull-tab cans will come in handy for the 30-Day Meat Hooks Challenge. :D
Those pull tab cans are occasionally handy for the 30-Day Accidentally Pull the Ring Right Off and Smash the Can Open With a Rock Challenge.
-
Great to have you join us Jothra

Day 6
No use today, went to the beach and then the pub tbh, good day then :D

-
A5X pretty similar though, think main difference is the GITD on the A7…the A7 does cost a bit more so might be a bit more to it but specs look identical, (I went for the 219c NW option)
I really like the side lights on it, properly useful
I’ve an A28 which I really like too -
@Echotech said:
A5X pretty similar though, think main difference is the GITD on the A8…the A8 does cost a bit more so might be a bit more to it. I really like the side lights on it, properly useful.
I’ve an A28 which I really like tooOkay. That explains why it looks so much like my A7. Because I usually wear a watch with lume on the hands, I really appreciate the UV mode.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login