Show off your Sak mod's!
-
Anyone know where I can get just the couple parts rather then ordering like two whole diff sak’s?
JR -
@andywork said:
That is so cool!
Could you call it a Huntsman Extra Lite?
After all, it does have an extra light. ;)Great project. I look forward to seeing more.


Thanks for the suggestion and I’ll have more sooner than later.
@MadPlumbarian said:
Ok but what backspring do I need to work?
JRAlready posted that above.

Use the saw spring and grind the awl or use the opener spring and make a rest and spacer for the saw pivot and the awl is unmodified. Those are the two ‘easiest’ choices. Up to you.

-
@MadPlumbarian said:
Anyone know where I can get just the couple parts rather then ordering like two whole diff sak’s?
JRI’ve seen loose parts and springs on the ‘bay
-
@andywork said:
Extra lights on your Extra Lite? Or extra “Extra Lites”? :ahhh :DYes and yes. :D ;)
Sister asked for a similarly built knife (or two). I threw out a number for a potential maximum that could fit. She didn’t decline…‘whatever fits would be fine…’ understanding that I’m willing to experiment a bit.
Bad for the he dash in your car, but her SAK will literally be ‘lit like a Christmas tree’!!
-
@MadPlumbarian said:
I saw some before but I looked a little bit ago and I only found like the saw and not the other parts..
JRI didn’t look, but at least Campers are cheap. I wouldn’t hesitate to tear down a new one if the mod warranted new parts.

-
hi all,
just finished modding my beloved mini champ so i wanted to brag about it :). i'm not done yet (scales need some minor tweaks and i plan to acid etch the tools but i don't have the acid yet).
so, here's the list of mods:
-
m1.8 screws instead of pivots (had to widen the holes on all tools and springs a bit)
-
custom designed 3D printed scales: front side has the compartments for both the tweezers and toothpick and additional one for a pin/needle, back side has pen
-
removed the ruler/flat screwdriver and cuticle pusher
-
nail file modified to have the flat screwdriver instead of nail cleaner (i plan to also mark the ruler on the back side)
future plans involve darkening the tools with acid, maybe adding some small magnifier, improving the scales design (pen doesn't move as easy as on the original, toothpick is a bit loose) and maybe ordering a 3D print in metal from shapeways (this is printed in PLA and works pretty good as i carried a "testing" PLA scale for last three months and haven't had any issues with wear). i'm also thinking of removing small blade and citrus peeler (to basically get a manager SAK) as i have a small scalpel on the keychain for precise cuts but i just love that small blade.



-
-
Very interesting 1g0rb,

JR -
I think I might have found the right parts for my mod I want to do, going to start with a compact, switch out the corkscrew for a Philips, but then add a layer of a saw with a awl on the backside.. just talking to someone to see if they have the right tension spring, but they have the saw and Philips I actually have the awl,, so it all boils down to the one part.. then once there shipped and I get them I’ll begin!
JR -
Nice mod 1g0rb
I really like the idea of the three scale tools in the 58mm - But was wondering how you got the tp and tw on the same side - as they would crash into each other.
Then looked again and reckon that their slots are slightly angled so they slip beside each other - Correct? ???Vic shoudl think about that!!
-
thanks Huntsman! yeah, after a lot of time trying to decide which tool to have i decided that i really need both (and the pin comes in handy for removing SIM cards and similar things :))
yes, they are slightly (5°) angled. here's the pic of the bottom side of the scale. i'll share the design files for it after i evaluate it a bit more.

-
Nice job 1g0rb!

I like the angled solution…and it’s nice to see some 58mm action in here.

-
Ok, I figured out the parts, and I found someone who had just the right parts rather then ordering multiple sak’s to do the job, so now I just have to wait for the parts to come in,,
JR -
Looking forward to seeing it.
-
Me too, still waiting for the status to change from the label created to the next step, yet it’s been two days,
JR -
as promised, i'm sharing 3D files for my custom scales from my last post. it includes a lot of variants: with two slots, with two slots+pin, pen and basic, all of them with screw/nut holes as well as with standard SAK snap-on mounting (I haven't tested those recently but before this it worked well on a previous version).
here it is: https://www.prusaprinters.org/prints/124359-sak-58mm-scales
-
@1g0rb said:
as promised, i'm sharing 3D files for my custom scales from my last post. it includes a lot of variants: with two slots, with two slots+pin, pen and basic, all of them with screw/nut holes as well as with standard SAK snap-on mounting (I haven't tested those recently but before this it worked well on a previous version).here it is: https://www.prusaprinters.org/prints/124359-sak-58mm-scales
I don’t 3D print, but that’s awesome of you to share!
I think the sincerest compliment would come from Victorinox, if they actually use your idea! Perhaps you should submit it to them? It would be nice if you got recognition directly from them.

-
@kamakiri said:
I don’t 3D print, but that’s awesome of you to share!I think the sincerest compliment would come from Victorinox, if they actually use your idea! Perhaps you should submit it to them? It would be nice if you got recognition directly from them.

thanks!
that's a really interesting idea to submit it to victorinox. i didn't even knew they accept ideas until i just found it on their site so thanks for mentioning that too :).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login