How to create a file surface?
-
That is so cool :o

-
There's also quite a scene in the woodworking community for those who like to make tools, which naturally spills over into the metalworking and precision machining side. There are dozens of different techniques (old and new) and hundreds of articles, if you're prepared to spend some time researching...
I'll try and grab some links next time I'm nose-deep in such stuff.@ComboTool said:
Now I can make a Woyageur modI thought it was a SAK for those who work on "Nuclear Wessels"!! :D
-
@ComboTool said:
I wave watched some videos and did a few tries but quickly came to the conclusion that I won't master this skill any time soon, so I gave up on the idea.Still planning on trying this myself. Was gonna use a 75 LPI profile. I figure I could make it finer by “doubling” the cut to get an effective 150 LPI surface.
I guess we’ll see.However, I recently came across a few multitools where the nail file isn't engraved, instead it's a microperforated layer glued on the tool. I found some (mono-tool) nail files build like this and removed the file layer. A few drops of glue, a few minutes in a clamp and... voilà!
This was my backup plan as well, but attached either mechanical like milled keyway or tack welding the ends. I was gonna use a file from a Vic nail clipper
Now I can make a Woyageur mod (Voyageur with Wenger scissors) without having to choose between opening bottles and filing nails.
Nice work.

-
The things I learn here on MTO :D
-
Did some testing for line spacing, cutting and sharpening. I wanted to make sure I wasn’t going to attempt a spacing like 150 LPI that 1) I couldn’t sharpen after spacing it out with a checkering file and 2) that I couldn’t reproduce or repair with current tools or files and 3) waste money on new files that I’ll never use again
Below is the test area on the edge of a 1.5mm tool. I found that I can hand cut and sharpen down to about 0.25mm or 100 LPI. Unfortunately, that spacing would still need the ‘doubling’ of a 50 LPI file. Near 0.35mm spacing was easy enough and could be achieved with the 75 LPI file. 150 might be possible for me to sharpen, but I couldn’t reliably cut it that tight by hand. Or not without destroying the previous cut.
Pretty happy that this dinky test sample actually cuts finger nails…even with all the different spacing and various sharpening methods.
I’m still undecided which file size to try, but I’ll update after I have something that works. I might just cave and get both the 50 and 75 LPI files.

-

Went with the 75 LPI Grobet. Nice piece…good quality IMO.
Already did a couple of tests and put a file on the knife I’m currently working on.
I’m glad I did the test beforehand, but turned out to be overly cautious and I should have just bought one and either the 50 or 75 LPI would have worked for my purposes. With the 50, it could have easily been used to get 100 or 150 with done care and good technique. The surprise there for me was that 225 LPI (!) is possible with the one I got. Big surprise is that I don’t seem to need to sharpen it at all for nail filing and I’m wondering what metals I could cut we itch my created files if I did.
Testing on my modded 111mm Garden doohickey:

-
Interesting!
JR -

Forgot to put up the finished one next to the OEM type.
Works great. Cuts faster and smoother than other files I use. Zero need to use a coarse followed by fine.

-
@Fortytwo said:
That looks very good, super professional finish.
Thanks for saying so. :)
The beauty of it though, is that anybody should be able to do this mod. I did this in minutes after I got the delivery. I thought it might require some tricky sharpening techniques…nope. Performs great as cut by the checkering file.
Getting subsequent lines to match up as the file is advanced to make the next set of lines, but even if it isn’t pretty, it should cut and file nails just great anyway.
-
The minichamp ruler would be a perfect candidate I feel. Should yield a better file with the extra bonus of having the ruler on the back.
-
That looks way easier than the chisel method I tried (and failed miserably). I might try to get my hands on one of those checkering files, but despite them being labeled "made in Italy" I can't seem to locate a seller outside the USA

-
@Fortytwo said:
The minichamp ruler would be a perfect candidate I feel. Should yield a better file with the extra bonus of having the ruler on the back.Good idea. No blank space should escape this mod!

@ComboTool said:
That looks way easier than the chisel method I tried (and failed miserably). I might try to get my hands on one of those checkering files, but despite them being labeled "made in Italy" I can't seem to locate a seller outside the USA
Probably a supply contract?
It’s pretty easy to do and I imagine way easier than chiseling and tempering yourself unless equipped to do so.
I gotta wonder if we’ll see a video from Felix doing this mod too. :D
Another quick test today…this time against the new cadet file. Again better cut and smoother finish. The cadet file left tiny scallops like serrations in the nail edge. Visible under magnification.
-
@Mike 56 said:
Years a go I’m thinking ten or fifteen years a go I think it was the old SAK forum their was someone I can’t remember who that was an accomplished modder he had a long list of mods one of his mods was using a checkering file to make a file on the back of a Vic package hook. The mod looked good. Would it be perfect I don’t think so but I think it would work on a package hook. I am shooting from the hip here I would think files are formed on steel that has been anealed them hardened after being cut.Mike
Now that we know this works as you remembered it, I gotta say thanks for posting about it!

-
@kamakiri said:
Still planning on trying this myself. Was gonna use a 75 LPI profile. **I figure I could make it finer by “doubling” the cut to get an effective 150 LPI surface. **
I guess we’ll see.This works as planned too. Finally got around to cutting more files today after finishing up some of the other mods I was working on. Essentially, it’s splitting the ~1/3mm spacing and going for 1/6mm spacing to get to the 150LPI. Not sure if I’m ever really gonna try for the 225LPI I mentioned. Seems like too high in the risk/reward context.

-
Made more today. A couple of hooks and an inline Phillips.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

