Toolbox Challenge - January 2022
-
Day 10
Used the knife and Stanley screwdriver today.

-
I used my knife several times, but I want to talk about my screwdriver. As I said on an earlier day, the bit is too small. I spent several hours today hunting for a similar screwdriver but with a larger bit, and I wasn't able to find anything. I'm looking for something small, with a pocket clip, and without an exposed tip that can poke me. I'll search some more tomorrow.
Here's the screwdriver next to a Super Tinker for size comparison. The end that covers to tip pushes back to expose the bit.

Several of us are carrying Stanley 4-in-1 screwdrivers that has Phillips #0 and #1 bits. I believe that Echo's and Fireman's screwdrivers are magnetized. Mine is not, but I was able to pick it up at my local Home Depot for $1.97.
-
Day 11
Although not terrible the cheapo folding scissors I’ve been carrying aren’t great either, with a tendency to close up on themselves
Saw these fiskars ones on sale so grabbed a couple, initial impressions very positive…and then used them to open something a little more interesting :D
I don’t usually collect classics but these precious Alox are too cool to pass up


-
Day 10
I checked Amazon and my local Home Depot, and neither have the Stanley 4-in-1 in stock. Luckily, Amazon delivered a screwdriver I forgot I ordered. I'm swapping out my Toolbox Challenge screwdriver for this new one. It feels pretty cheap, but it has 8 bits, including a #2 Philips.
No uses to report today.

-
Although not terrible the cheapo folding scissors I’ve been carrying aren’t great either, with a tendency to close up on themselves
Saw these fiskars ones on sale so grabbed a couple, initial impressions very positive…and then used them to open something a little more interesting :D
I don’t usually collect classics but these precious Alox are too cool to pass up


First, those are cool scissors!
What is the difference between Alox and Precious Alox? Is it just a different, more pronounced, texture?
-
@Rich_SD said:
First, those are cool scissors!What is the difference between Alox and Precious Alox? Is it just a different, more pronounced, texture?
Thanks Rich

As you can see in the pics below the precious alox has what looks like a woven texture, it catches the light beautifully…pictured with a cadet II and cadet for comparison



-
Although not terrible the cheapo folding scissors I’ve been carrying aren’t great either, with a tendency to close up on themselves
Saw these fiskars ones on sale so grabbed a couple, initial impressions very positive…and then used them to open something a little more interesting :D
I don’t usually collect classics but these precious Alox are too cool to pass up


Fancy alox.

Did one scissor open the other?
-
I checked Amazon and my local Home Depot, and neither have the Stanley 4-in-1 in stock. Luckily, Amazon delivered a screwdriver I forgot I ordered. I'm swapping out my Toolbox Challenge screwdriver for this new one. It feels pretty cheap, but it has 8 bits, including a #2 Philips.
No uses to report today.

I have a bunch of those. They're quite decent.
-
@ReamerPunch said:
Fancy alox.
Did one scissor open the other?
Thanks RP

It was a bit the foot bones connected to the ankle bone…the bomber knife opened the scissors, the scissors opened the classic and now I’ll have to use the classic to open something else
-
Day 11
A friend pick up this for me.

It's a giant ratchet. :D

-
@ReamerPunch said:
[..]
It's a giant ratchet. :D
[..]It's not so bi...oh.
-
I am also not a very good comedian. :D
-

At work, during class time, so no pictures of the wall sharpener I had to take off the wall, disassemble, and unclog.

It's this exact model.There were two problems. First, there was a piece of lead stuck in a magical spot we couldn't get at in the very back of the blade assembly. Second, the shelf it's attached to is made of compressed oatmeal, and the screw holes were a little loose.
I used my multi-driver to take out the Phillips screws holding it to the wall, and to take out the screw that holds the crank and the blade assembly in place. I used the tip of my mechanical pencil to poke out the offending junk, reassembled, and then re-installed it on the shelf with threadlock on the screw threads. So far, so good — we'll see if the mounting screws hold. I have high hopes.

The Spyderco Ladybug didn't help with the sharpener, but I sure like it anyway. -
Although not terrible the cheapo folding scissors I’ve been carrying aren’t great either, with a tendency to close up on themselves
Saw these fiskars ones on sale so grabbed a couple, initial impressions very positive…and then used them to open something a little more interesting :D
When I searched those, the first store on the list was JOANN Fabric. Not a very manly place to go
so I was glad to see them on Amazon as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

