Leatherman Garage
-
Leatherman and cheap are words that does not belong in the same phrase, something expensive for sure...
-
@GearedForwards said:
I may be missing something here, but 1,000 isn't mass production? Are they going to claim that these innovative engineers are going to hand produce 1,000 units of each design?1000 pieces is a sprint run at best. I can't really see then hand producing ( by definition ) the pieces. They have tooling so I imagine them starting with a current format, like the Charge/Wave. This is why I said I hope they don't think adding paint or a Damascus main blade is gonna get anyone excited at least not me.
-
@Aloha said:
1000 pieces is a sprint run at best. I can't really see then hand producing ( by definition ) the pieces. They have tooling so I imagine them starting with a current format, like the Charge/Wave. This is why I said I hope they don't think adding paint or a Damascus main blade is gonna get anyone excited at least not me.I guess my point was, if you can ramp up a run of 1,000 of a product, surely most of the hurdles or mass production have already been passed?
-
I just hope that this isn’t something along the lines of an expanded clothing line, cutlery, cologne, luggage, etc.
-
GF
. Yes sir. As Chako said I feel its a money grab and while I have no issue with that I do hope its innovation and design rather than pretty colors and Damascus blades. It also makes me think, isn't this what R&D is for? This "garage" is what then again? -
It may be their reaction to the Free series not doing as well, why wait to recoup R+D costs through product sales if you can fund it will boutique product runs? Whilst those exact products may never be generally produced, versions in lesser materials with a slightly altered design could certainly take advantage of mechanisms derived from the scheme.
I would want to at least see knife industry level fit and finish in these products, the type of general play and finish that is acceptable in Leatherman tools would never go over well in the knife hobby and there's zero reason why the standard shouldn't be there.
If you're not going to put out quality then you're just overcharging people for the name of a man no longer involved in making the tools.
-
On the positive side, this could be something cool. Maybe it's a response to all of the people that want to buy spare parts for mods from Leatherman. Maybe it's a response to people who asked for a specialty shop from Leatherman where we could pick our own tool setup. Maybe it's a forum for discussion on different Leatherman design ideas.
I think the only thing that will piss me off is if they sell something and manufacture so little that they all get bought up instantly by resellers.
-

Is this LM pivoting? This seems to be a work tossed about a lot these days. If LM is using this garage to try out new ideas they better get the fit and finish together. I mentioned those that are likely to buy these garage tools will be very much scrutinizing these tools ever so closely. This could be a disappointing venture. I hope not and I'm all for LM pushing limits. Many wont be fans of paint or newer blade materials. This can be done currently.
I can't even keep track of all the amazing things the modders here on MTO have come up with. Not the leave out others who have done some really cool things.
I wonder if the the Free series was created in this garage how badly down hill this would have gone? I didn't pick one up but from all I read this would have been a thumbs down.
-
@ RichSD, at runs of 1000 or less I'd imagine it'll be similar to any maker. They will retail on the secondary market for much much more. Look at the LE SAKs, and knife industry, GEC for example.
I am excited to see what they come up with. I'm sure over the years they have had some engineers who wanted to run wild with design. They have been on our boards and I'm sure they've seen some cool stuff. Most of the stuff here is one off or very limited. The Skeletool hammer and nearly everything EVIL did with the Skeletool.
-
@Aloha said:
@ RichSD, at runs of 1000 or less I'd imagine it'll be similar to any maker. They will retail on the secondary market for much much more. Look at the LE SAKs, and knife industry, GEC for example.I'm sure they'll be much more on the secondary market - that alone I don't have a problem with. What I hate is a manufacturer not creating enough items to satisfy the immediate buyers so even someone who tries to buy it on Day 1 is out of luck (unless they're a dealer of have some inside connection). GEC is a great example of a company that does that crap, so their stuff is dead to me
-
@Poncho65 said:
Yep :D price is always my biggest deterrent ;) If money wasn't an object I would have a very large collection :ahhhIt may not be very large, but it is quite enviable

Like you, price is my biggest deterrent. Otherwise, I would have a PT-540 and a Cable Dawg in my electrician's MT collection. I have just bought a Radioshack E4 because I finally found one that was priced at about 1/3rd the typical amount and appears to only need some cleaning.
-
@Adam5 said:
It may not be very large, but it is quite enviable
Like you, price is my biggest deterrent. Otherwise, I would have a PT-540 and a Cable Dawg in my electrician's MT collection. I have just bought a Radioshack E4 because I finally found one that was priced at about 1/3rd the typically amount and appears to only need some cleaning.
The Es4's wire strippers work fantastic

-
@Adam5 said:
It may not be very large, but it is quite enviable
Like you, price is my biggest deterrent. Otherwise, I would have a PT-540 and a Cable Dawg in my electrician's MT collection. I have just bought a Radioshack E4 because I finally found one that was priced at about 1/3rd the typical amount and appears to only need some cleaning.
Second hand is how I have gotten many
I probably have more than you think though :ahhh I actually don't even count them anymore
:D -
I remember Leatherman claiming they do not create modified tools, then along came Dave Canterbury and he got a Wave modified by Leatherman... so maybe this could be an example of a prototype experiment that the masses may had wanted, and Leatherman could of sold the design off in limited numbers?
Only drawback I can see on this is a warranty issue...
Did not like the whole magnet stuff on the Free series. Never had one to test or try out. Would of probably bought one of their non-pliers series if one of them had the Leatherman push-type of can opener. The hack with a bottle opener, push can openers FTW. :D Is one of the reasons I carry a Swiss Knife or Tool is because stuff works, and of the can opener.
-
Just remember that Leatherman engineers looked down on everyone on this web site during a reddit live event.
-
I do remember that
and even signed up on Reddit just to comment to them but I think my comment was a bit late for them to see 
Unless what they come out with is revolutionary or something out of the norm, not just upgraded materials and extra colors on existing models then I will probably pass because they won't be cheap :-\
Who knows I may end up eating my words and hopefully so but I have high doubts about this

-
That sounds like a stupid thing to do

Sent fra min M2002J9G via Tapatalk
-
@Poncho65 said:
Unless what they come out with is revolutionary or something out of the norm, not just upgraded materials and extra colors on existing models then I will probably pass because they won't be cheap :-\I signed up in hope of customized tool sets, not just a new color. I don't like the FOMO motivation, "launch days", and I probably won't like the price. If it works out, it works out. If not, I've lost nothing.
-
@Poncho65 said:
It may have to do with how people went crazy over the NASA Charge
I won't ever be able to afford any of them probably but I did get an email and signed up for updates :D
Well just like those heritage pst they brought out for however much. They showed they could move those, so there is some money out there.
Speaking of the Tom Sachs charge, aVE on YouTube got one and used it when he was putting chains on his tractor rashed up the pliers and bent the file, and the scribe was broken when he first opened it. He thought the bead on the lanyard was plastic and scratched it on something metal and was amazed it was ceramic. And I'm sitting there saying omg what is he going to break next :o
That one won't end up on a shelf

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login