kkokkolis' EDC & SDC
-
I just added the slide tab and finished the end with a plastic clasp that's made for that.
Thanks to the slide tab, I can now adjust the size of the loop to correspond with the tree I encountered :D
You could just make a knot at the desired length and untie it after use.

-
New EDC

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Thats a lot of utility there.

-
I like the Skeletool's bit holder. It offers so much in the way of driving options. While it doesn't have the largest pliers it is very usable for many things The knife is also a great option for anything you don't want to use your SAK blade for.
-
@Aloha said:
I like the Skeletool's bit holder. It offers so much in the way of driving options. While it doesn't have the largest pliers it is very usable for many things The knife is also a great option for anything you don't want to use your SAK blade for.The blade in Swisschamp is very offset, short, two hand opening and not locking. In XLT even more (in XAVT extremely).
I always carry a balanced locking knifeblade, be it a Delica, Buck 110 type Opinel Jardin (most of the times), Gerber Double Take, or this, and I have other options like Okapi, Douk Douk, other Opinels etc.Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Some elements of my EDC.
A LED Maglite was easily added. It's insane what you can add to the original Swisschamp leather pouch (and I have 2 different Victorinox SOS kit pouches abs 3 Skinths I try not to use again).
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Lighter picture with Smartwa-tch screen off.

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
That didn't last for long. I summoned Skinths.
New setup.
The right Skinth goes in the pocket or in my bag. You see, the Mercator jingles hitting my komboloi when they are both in the same pocket. Now I have options.
The left one carries all the rest and stays in the bag, but I can put it instantly on my belt or hang it somewhere. I can carry thus my Swiss card for instant access to the nail fixing tools and a sharpening stone. Nice.
Finally I found a decent way, after all these years) to carry the 3 Victorinox bits that don't fit on the SAK's case.
It's a small container from Vanilla powder. It fits all three precisely and nothing more than the three. I simply trimmed the inner section of the cap to fit.
The best part is that I can easily exchange the XLT with a Spirit or a Charge plus an Alox with scissors. That's what I carried for years, it's tested.
It's a pity I misplaced my Victorinox pencil, because it fits easily in both Skinths.


Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Its alwasy nice to see how a Skinth is packed. You got a lot in them yet they don't looked stuffed. I also like the pin ;).
-
@Aloha said:
Its alwasy nice to see how a Skinth is packed. You got a lot in them yet they don't looked stuffed. I also like the pin ;).Yes, it is. And neither of the two is fully exploited.
There's space for a small tool, like the ones in the box shown. Be it a 54mm or 74mm SAK, a Victorinox Nail Clipper, a Squirt, a Micra, a Minitool, a Bic lighter or something f similar size.
For the moment I put a Squirt there until I find what would be more useful.
Or, as I said, one can carry a Charge AND a Crunch if work has to be done, or use my former setup of Spirit Plus + accessories + an alox with Vic scissors.
How versatile are those Skinths!



-
Another option: Hobby knife.


Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Other tools may be attached if needed.
Charge can replace the Skeletool and so can Spirit, if I put the clip.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Well, I have to admit that my way of being minimalistic is a bit maximalistic.
At least I'm not maximalistic in a maximalistic way. At the time. :ahhh
-
Can't fault you for carrying what you like and certainly useful items. You carry what you like and thats part of the fun of this hobby. -
@Aloha said:
Can't fault you for carrying what you like and certainly useful items. You carry what you like and thats part of the fun of this hobby.Thanks for the encouragement. I think that whatever you may have, if it's not available when and where you need it, it's like you don't have it at all.
-
After a month or so, it looks like the Skeletool + Swisschamp (XLT or else) is a great combination. Most of the time I don't even open the Skinth, Skeletool does the job. In fact, if mine had scissors (like those on Surge, Juice or Squirt), it would be even more useful. Victorinox scissors on a Skeletool would be a dream (I've seen that before somewhere).
And exchanging the basic tools, Skeletool, XLT and S4 with combinations of Charge, Spirit, Crunch, 87, 91 and 93mm SAKs, Juice XE6 or Squirt P4, is lightning fast.
The value Skinth adds to our EDC is priceless.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Glad the Skeletool is working out. I agree the Skinth is a nice way to carry a variety of items.
-
A Swisschamp XLT and a Juice XE6 fit snugly into the Skinth L Shield, just in case one would like to carry 2 flagships at the same time.
No, I will not do it, I was just curious.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
If you need to EDC the Victorinox mini tools, here's a way.
The fit (barely) inside a Solitaire Maglite.
You have to remove the battery first, of course.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
