MXBS Owners Club
-
Right then! It would appear that we need a new club/group

Fellow MXBS owners (Spirit or SwissTooI) I present to you the owners club

Here's my O/G Spirit from last year (courtesy of Elsinox
) Present yours forthwith 


-
Oops! I didn't see this thread

-
Anyone have any pics of mix matched clips? such as BO MXBS with a silver clip?
Just got my MXBS and not really a fan of the coating after seeing how it wears online. I swear people were saying the burnished steel wasn't a coating, rather a blackened steel, but really it's just another black oxide smh. Eitherway, does Anyone prefer BO over silver?
-

Here are my first impressions:
First, this tool was obscenely expensive - $230 (before tax)! For the same price, I could have purchased a Leatherman Surge with a pocket clip, a full bitkit set (sets #1 and #2), a ratchet driver, a replacement wire cutter kit, an extra saw and file, and still had enough left over for lunch. Yes, it’s nice, but it’s not any nicer than my Charge or my Surge (or several others). Still, I’m glad I bought it.
Since my Sprit X has very tight tools, my top concern before the MXBS arrived was how tight the tools would be, especially the one-hand opening blade… and the MXBS didn’t disappoint to disappoint.
This thing seriously has the tightest tools of any of my multitools, which I assume is partly due to the black oxide coating. I actually bent my fingernail tip back while trying to pull out the scissors. The one-hand opening blade is tight too, but I am able to open it easily enough.The second one-hand opening blade (the belt cutter) is a very cool blade, but it’s on the wrong side of the tool. Unless you’re a lefty, you can’t open it one handed. That was a weird design decision in my opinion.
On size and weight, it’s about the same size as my Surge, but it’s thinner than both my Charge and my Surge. Its weight falls somewhere between a Charge and a Surge. I frequently pocket carry my tools, so I think the size and weight of the MXBS is outstanding for a large multitool.
Another outstanding feature is the scissors. I am unimpressed with most multitool scissors – off the top of my head, I think the Surge, Micra, and medium-sized SAK scissors are the only ones I really like. This MXBS has full-sized SAK scissors – not the weird stubby ones like the Spirit X. Very, very nice!

Finally, I don’t know if you can tell by the pics, but the black oxide coating has a bit of a mottled look. I tried wiping it down, and I also tried a little dry lubricant, but I couldn’t make the mottled look go away. Personally, I don’t get BO for the look, but I am sure that anyone that wants their multitool to look pretty might be annoyed by it.
Overall, I would say the MXBS would be an outstanding, albeit expensive, multitool if it didn’t have such ridiculously tight tools. I was planning on giving it a 30-day EDC test, but I don’t think I will now because my fingernails are not made of steel. I put it in front of my computer so I can use it as a fidget toy during meetings – hopefully that will help break in the tools a little.
Anyway, I hope this helps someone. For size comparison, here are a couple pics of it next to a Charge.


-
I’ve got my MXBS today. It will be my EDC at work (🚓).
Since Victorinox Brazil doesn’t have it in stock, I must be the first person in Brazil to have one.

I’d like to say thank you to Elsinox (member of this forum) for his help!!




-
Here are my first impressions:
First, this tool was obscenely expensive - $230 (before tax)! For the same price, I could have purchased a Leatherman Surge with a pocket clip, a full bitkit set (sets #1 and #2), a ratchet driver, a replacement wire cutter kit, an extra saw and file, and still had enough left over for lunch. Yes, it’s nice, but it’s not any nicer than my Charge or my Surge (or several others). Still, I’m glad I bought it.
Since my Sprit X has very tight tools, my top concern before the MXBS arrived was how tight the tools would be, especially the one-hand opening blade… and the MXBS didn’t disappoint to disappoint.
This thing seriously has the tightest tools of any of my multitools, which I assume is partly due to the black oxide coating. I actually bent my fingernail tip back while trying to pull out the scissors. The one-hand opening blade is tight too, but I am able to open it easily enough.The second one-hand opening blade (the belt cutter) is a very cool blade, but it’s on the wrong side of the tool. Unless you’re a lefty, you can’t open it one handed. That was a weird design decision in my opinion.
On size and weight, it’s about the same size as my Surge, but it’s thinner than both my Charge and my Surge. Its weight falls somewhere between a Charge and a Surge. I frequently pocket carry my tools, so I think the size and weight of the MXBS is outstanding for a large multitool.
Another outstanding feature is the scissors. I am unimpressed with most multitool scissors – off the top of my head, I think the Surge, Micra, and medium-sized SAK scissors are the only ones I really like. This MXBS has full-sized SAK scissors – not the weird stubby ones like the Spirit X. Very, very nice!

Finally, I don’t know if you can tell by the pics, but the black oxide coating has a bit of a mottled look. I tried wiping it down, and I also tried a little dry lubricant, but I couldn’t make the mottled look go away. Personally, I don’t get BO for the look, but I am sure that anyone that wants their multitool to look pretty might be annoyed by it.
Overall, I would say the MXBS would be an outstanding, albeit expensive, multitool if it didn’t have such ridiculously tight tools. I was planning on giving it a 30-day EDC test, but I don’t think I will now because my fingernails are not made of steel. I put it in front of my computer so I can use it as a fidget toy during meetings – hopefully that will help break in the tools a little.
Anyway, I hope this helps someone. For size comparison, here are a couple pics of it next to a Charge.


So it is the size of a Swiss Tool then. Hmm. And the mottled BO, eww, yuk. Those tool parts look horrible. Personally I would contact Victorinox with the photos of the tool parts spread out and ask why is the BO not more uniform, especially for the premium price. Might mention that your Leatherman tools do not look that bad even after 10 years of use. :ahhh
Is good to see that a nylon sheath comes with this pocket monster. Wonder if anyone is designing a more robust leather sheath for them yet?
-
@Outback in Idaho said:
So it is the size of a Swiss Tool then. Hmm. And the mottled BO, eww, yuk. Those tool parts look horrible. Personally I would contact Victorinox with the photos of the tool parts spread out and ask why is the BO not more uniform, especially for the premium price. Might mention that your Leatherman tools do not look that bad even after 10 years of use. :ahhhIs good to see that a nylon sheath comes with this pocket monster. Wonder if anyone is designing a more robust leather sheath for them yet?
They should fit in the existing sheaths for that series, might have to use plus sheathes, but some should work

-
@Outback in Idaho said:
So it is the size of a Swiss Tool then. Hmm. And the mottled BO, eww, yuk. Those tool parts look horrible. Personally I would contact Victorinox with the photos of the tool parts spread out and ask why is the BO not more uniform, especially for the premium price. Might mention that your Leatherman tools do not look that bad even after 10 years of use. :ahhhThe MXBS is a Swiss Tool, so it's the same size. It does handle a bit different because two of the tools have those OHO tabs.
-
@Outback in Idaho said:
So it is the size of a Swiss Tool then. Hmm. And the mottled BO, eww, yuk. Those tool parts look horrible. Personally I would contact Victorinox with the photos of the tool parts spread out and ask why is the BO not more uniform, especially for the premium price. Might mention that your Leatherman tools do not look that bad even after 10 years of use. :ahhhIs good to see that a nylon sheath comes with this pocket monster. Wonder if anyone is designing a more robust leather sheath for them yet?
Yeah, I was definitely surprised how bad it looks, but at least the BO covers everything. I am more upset how difficult it is to pull out a tool (the scissors and the Philips head are the worst)!
-
@GearedForwards said:
Have you tried working some oil into the joints?They were already oiled pretty well out of the box, but I could try more.
-
@GearedForwards said:
They should fit in the existing sheaths for that series, might have to use plus sheathes, but some should work
I have a Spirit X and a Spirit MX. The MX doesn't fit into the Spirit X sheath because the OHO tab sticks out. Swiss Tool similarly has tabs that stick out, so if the previous sheaths were form-fitting, then the wider OHO tabs should also interfere with using older sheaths.
-
OK - You are in the SAK Klubs thread
Whoey had to make a admin change to allow this to happen - So thanks so much Whoey

Note: There awlready was a Spirit MXBS Club - So you are both there now
-
Bit the bullet and ordered a SwissTool (MXBS) Just so the Spirit wasn't awl alone (£205 GBP :ahhh :ahhh :ahhh)
Check this out: Swiss Tool MXBS
Victorinox Swiss Tool MXBS - 3.0326.M3N ++ Explore the world of perfect Swiss quality online ++ Home of the Original Swiss Army knife ++ Find a store close to you ++
Victorinox (www.victorinox.com)
-
@SurgeUk said:
Bit the bullet and ordered a SwissTool (MXBS) Just so the Spirit wasn't awl alone (£205 GBP :ahhh :ahhh :ahhh)Check this out: Swiss Tool MXBS
Victorinox Swiss Tool MXBS - 3.0326.M3N ++ Explore the world of perfect Swiss quality online ++ Home of the Original Swiss Army knife ++ Find a store close to you ++
Victorinox (www.victorinox.com)
As per our drunken agreement I'll make sure it gets to you after thorough quality assurance :salute:
-
@GearedForwards said:
As per our drunken agreement I'll make sure it gets to you after thorough quality assurance
I agreed to nothing and, if I was drunk, you were just taking advantage of me and should be ashamed

Seriously though; £205 of our British Pounds (or just over the price of a whole sheep*) is not cheap!!! :ahhh
Hope awls good in the north of Welsh-land

** I suspect the sheep would get stuck in the letterbox
* -
@SurgeUk said:
I agreed to nothing and, if I was drunk, you were just taking advantage of me and should be ashamed
Seriously though; £205 of our British Pounds (or just over the price of a whole sheep*) is not cheap!!! :ahhh
Hope awls good in the north of Welsh-land

** I suspect the sheep would get stuck in the letterbox
*I have no shame

It is a lot of money for a tool! Though, with inflation and cost of living as it is, it's quickly becoming cheaper to just rent the sheep by the night. :ahhh
Not bad, tangling with the process of becoming a sole trader, all a bit daunting
I hope that Waitrose is keeping the wife and yourself in luxury potatoes and Italian-style wine 
*The notion that you wouldn't have a dedicated sheep recepticle is just ludicrous

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

