What Did You Use Your Multitool For Today?
-
Used the scissors on my Spirit to cut tags off Mrs. TJs new purse.
-
Used Spirit's philips and pliers to reposition a few solar deck lights around to gain better southern exposure. Helps when backing in the driveway at night. Ordered another solar light that had its own unque design. Will see how that goes.
Cut the end straw on a new 40 oz. water bottle. It was just a tad too long making it difficult to use the internal straw feature. Shaved off a tad with the serrated knife blade. Works MUCH better now. :D
And been using the Lman Pump single-piece tool to help open the car door handle. When it got to 7 below the outer door handle snapped off. Dern door was frozen to the body. Usually it is an internal lever that always breaks in the winter. Seems I am always buying these every year... if only a manufacturer would make these out of aluminum! I know, cause they make more by making them out of cheap plastic. Still annoying as all heck and more difficult to replace when it's freaking cold outside!
So I slide the flat tapered portion between the door handle seal and the inner door grabber to gentle up the door. This one-piece tool helps in that it has more wider support for the hand. Have a clip I carry it on a key loop, so it is always handy - unless I leave it inside the car. /grr
Was using the Spirit's Awl or Bottle Opener part to open the door initially. The tapered Pump tool seems to get in, under, and behind the door grabber backing better.
Am always using the Spirit for various stuff around the house, or poking holes in small dinners to nuke in the microwave. Originally bought the Spirit so I could send the Spirit X in for a custom sheath. But side the Spirit's velcro sheath seems more rugged than the leather sheath I put the custom leather sheath off for a while.
Only thing I wished the Victorinox Spirit had was a place to put small tweezers inside ... and a Fisher Space Pen cartridge compatible tool part to use when I forget to clip the Fisher Backpacker on my shirt. Them pen cartridges write oh so much better! :D
-
Surge screw drivers helped remove an old storm door handle, blade opened the packing for the new handle, and drivers helped install the new (horrid quality) one. Cap lifter opened a bottle afterwards, and the blade stirred my coffee a few minutes ago :D





-
Door handle replacement for the Suzuki. The roughest part overall was getting the rod keeper's clasp over the lock rod - in the cold. /brr
Used the Spirit to do most everything, save snapping that stubborn clasp over the rod. Ended up using a 14mm wrench as it had the right length and was wide enough to get pressure in the right place. All the screws, removing the electrical door console, the works done by that Spirit. :DOh, and having to work with a mirror makes things more challenging. Swear I need a smaller round mirror with a magnetic mount with a goose-neck for positioning. :ahhh Have been using an old Oldsmobile clip-on mirror for this type of stuff, and for use in home repairs too.

-
Nice work Outback

19°F here in Kansas. Used the Eat'N Tool to pry open my iced-over truck door and stir my coffee this morning :)

-
Komboloi repair is a complex task. I use my EDC Vic and LM, plus 2 EDC slacking needles and a Crunch as a 3rd hand.

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
It was very hard to pass the double cord through two of the beads and, guess what? Uncle Def's Ultra Premium Tool Oil saved me!
I also removed rust from my Charge with it (I never had to do that with a Swiss item).
I finished by applying bee wax ointment to the cord, for smoothness, waterproofness and protection.
I wonder if that would be a good idea for preventing rust in Leatherman tools. -
My Rubik's Cube fell and some cube faces popped out. I put them back randomly and the Cube proved unsolvable next time I played with it. I disassembled it using Power wrench II as a gentle prying tool and corrected the mistakes. Now it's as good as new.

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
@kkokkolis said:
My Rubik's Cube fell and some cube faces popped out. I put them back randomly and the Cube proved unsolvable next time I played with it. I disassembled it using Power wrench II as a gentle prying tool and corrected the mistakes. Now it's as good as new.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
Excellent and unusual use

-
Used my Surge to free some new work boots from a plastic prison ;)

-
@kkokkolis said:
My Rubik's Cube fell and some cube faces popped out. I put them back randomly and the Cube proved unsolvable next time I played with it.
I had that problem with an old Chex promo Rubik's Cube that I got used. After determining that it couldn't be solved, I also had to swap some of its segments around. I used the cap lifter on my Super Tinker to fix it, if I recall correctly.
-
Didn't use them today. Just finished some light touching up of my most used EDC rotation.

-
Just used my Vic CyberTool 34 to adjust my 3D Printer bed.
-

I was cutting this tip of roll with Swisstool serrated blade, but it was so thick that only a mora could be used relatively easy.
-
I drilled some holes.
That is the best of awls.
Of awl awls regarding hawls, if I may say so.
I miss it from my EDC.

-
@kkokkolis said:
I drilled some holes.
That is the best of awls.
Of awl awls regarding hawls, if I may say so.
I miss it from my EDC.


-
You can awlso count me as a fan of the 93mm awl.
-
To remove old £1 coin trolley coins from new £1 coin trolleys. All 3 rows out of action as a result. The car boot Surge saw some daylight for 5 minutes. Easy to rip them out of there. Gotta love the Surge
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login