Combo Edge Challenge 2/22-3/2/22
-
yeah, that's the large badge and the serrations are barely visible. I'll work on it at a later date. Too bad I will not be getting it myself. :-\
-
@ElevenBlade said:
:doggy:Here I am!
I was thinking that the challenge could involve any knife or multitool that has a Combo edge blade. One or more tools would be at the participant's discretion. If you want to use one or a combo of more than one it's up to you. If you want to make one aspect of the challenge an initial choice of which tool would work best for you for the whole month, in the spirit of the Jack of All Trades and Master of None purpose of the combo edge blade, that's fine. If you want to put several of your combo edge knives and multitools through their paces, thats fine too.
I also envision that if you wanted to choose a multitool that has a combo edge blade (E.g. Signal or Skeletool) you wouldn't be required to use the blade itself for all 30 days. Using a screwdriver or pliers would count as a daily usage of the tool you chose that has a combo edge blade. It's just that if you needed to use a blade, you would have to make do with the combo edge, with all it's pros and cons. If you choose a knife with a combo edge, like a Spyderco, you'd have no option but to post a picture of that combo edge blade in use each day - which should be fine for you if you are going in with a folding knife. One of the things we like to do is think about which tool would work best for us in most (or all) scenarios. The same can be done here, as long is the tool has a partially serrated blade.
I think I will be doing the Challenge with a Skeletool KBx, so I will have only a knife and a bottle opener. I also have a regular Skeletool and a 111mm Vic, and I might use the Victorinox for part of the challenge. But it's quite likely I'll be doing the whole month with the KBx. For me - my EDC almost always has scissors. Since I don't have a tool with a combo edge and scissors, the scissors are out of the picture for me. This leaves me with the three aforementioned choices. Without scissors, I think I will lean towards the smaller knife that is on the Skeletool, but since I still have little to no use of pliers, I'll probably go for the KBx instead of the fully functional one. I might go with a Victorinox Nomad, but I'm leaning toward the Skeletool KBx due to half the tools at less than half the size... still just a thought though.
I'm very excited that we're able to get enough participants to have our own badge - this way everyone can get to choose if they stick with one tool, or switch between tools - since either way, you'll get the badge.

Excellent. You're back
and thanks for the clarification 
I'll be using the MP600 for work based stuff and the others for non-work stuff

As for badge design..... :ahhh :ahhh :ahhh (good work RP
) -
@ReamerPunch said:
How about a minimalist design?
A subtle combo edge.I had a similar idea. Nicely done.

-
BUMP!!!!

Not long to go now :ahhh :ahhh :ahhh
Join those of us that "march to beat of a different drum"

-

I am signed up for the Mini Tool Challenge, but I plan to contribute some to this challenge also. I just don't think it will be daily.
-
I just realized my old Benchmade 940 has a combo edge. I think this will be the perfect reason to dig it out.
-
The 940 is an iconic knife. That would be great.
-
@ElevenBlade said:
Hi all
I'm back from much-needed break, gearing up for this challenge. Thank you all for keeping it alive in my absence. And thank you SurgeUK for the message - I did receive it, but it took me until today to get logged back in because somehow the server wouldn't send me the necessary email to recover my password. Anyway. We're here now.
I'll be joining you awl in the challenge, but I will be away from my computer for almost a week in the middle fo February. In case I can't post in real-time, I will catch up as soon as I can for the 30 days.
Looking forward to the Combo Edge Challenge!
Sorry EB I have no idea how I missed this response
::) -
One more day!

-
-
@Alan K. said:
One more day!
:ahhh
:ahhh
:ahhh -
@SurgeUk said:
Sorry EB I have no idea how I missed this response
::)No worries!

:D
Nothing wrong with that, I'm always looking for a reason to celebrate.@Sos24 said:
I just realized my old Benchmade 940 has a combo edge. I think this will be the perfect reason to dig it out.Sounds great.
I just pulled out a little something special for this challenge myself. An old friend will be making an appearance.This is going to be fun

-
Day 01
Today I selected a first gen Myerchin Titanium rigging knife model 377P. It is 3/4 serrated with the non-serrated portion towards the tip of the blade. I used it to open a box of cat litter.

-
Day 1
Titan Swivel Head ratchet
Aeloa key-chain ratchet
GreaTalent ratchet kit
Ovatt ratchet kit
And Engineer pliers with the cover


-
DAY 1 Part of the torture of the Toolbox Challenge was having a new Signal sitting around. Now I can carry it for a month!


-
<u>DAY 1</u>
Excellent start awl

Today the Wingman will be my erm....Wingman

Not much use anticipated as I need to be out and about and can't really carry it (locking blade and no reasonable excuse ::))
Don't you just love British knife laws


-
Day 1 of

BuckTool 360

Read ReamerPunch's excellent review of the BuckTool 360:
/post/1936624 -
Powernoodle Day 1
*
Spyderco Resilience Lightweight. 4.2" (107mm) 8Cr13MoV blade, 4.4 oz (125 grams). The relatively large expanse of plain edge is good for push cutting envelopes, peeling apples, etc., while the serrated portion rips through packing straps, tape, rope, etc.*
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
