kamakiri's Former Lurker / New Member Intro (long read)
-
More weird kamakiri stuff

-
@GrouchoM said:
Could the batteries fit in lieu of the scissors or the on-end Phillips screwdriver?That’s all possible, but at that point…why not put the Lite module in? The tool, say the Phillips, could be essentially turned into a battery compartment door by grinding a lot if it away, but I don’t really like taking away the main function of the tool.

I prefer hiding things as much as possible or practical. I already see the added micro switch as a necessary evil without the lite module.
Wouldn’t be a ‘problem’ to put a big battery even like like a 123 size, but the compartment required wouldn’t look like knife or tool parts at all. There are some vertical drop-in style battery holders, which could work with button type batteries, but not really interested in doing anything that way. But could be an option for anyone willing to delete tools to add batteries which are visible, but safely secured.
-
@kamakiri said:
Wouldn’t be a ‘problem’ to put a big battery even like like a 123 size, but the compartment required wouldn’t look like knife or tool parts at all.Now I think I have one more project to put in the queue. ‘Only’ as wide as about 5 mag/Phillips layers!

Well, at least I know where some of all these spare parts I’m generating will go toward.

-
Checkering file came in.

Minutes after I got the mail I made some test pieces and put one on the knife I’m working on for my sister.
Pleased with the results so far. Pic is of the testing with a couple of patterns and spacing variations.
More details in the mod forum thread here:
/post/2309412
-
Next to the Vic hook.
Also better, IMO. Faster and smoother cut.

-
OMG.. I had no idea this could be done outside of a factory (what do I know.....). That's an awesome addition!
Sent from my SM-G991U using Tapatalk
-

Cut my fingernails today and the performance of the file is great. No need to switch from a coarse to fine file. This profile cut quickly and smoothly. Way better than any single file I’ve used before. Crazy.
EDIT:
Just put it to a real test of smoothness. Dragged the bails on the back of an old necktie…no catching from the nails…can’t say the same from the machinist fingers.
-
More crazy projects in progress.

-
Great work, Kamakiri!

-
@Rizio Il Ghiro said:
Great work, Kamakiri!

Thanks, Rizio! :)Tore these two down at 2:22 since it’s 2/2/22.
No knives were harmed in the process. No drill bits used. ;) :D
Did the two in tandem so I had to label the piles so I wouldn’t mix the parts. Forgot to grab paper towels from the house. Padded envelopes don’t really keep rolling parts on them real well. Oops.
‘98 Explorer and c.’01 CT29


-
Where do you get all of your grey magnifiered Explorers?
Sent from my SM-G991U using Tapatalk
-
Mostly from the big auction site. Wish I had more practical local options.
Getting the right era or specific year parts is one of the big reasons I can ID the production year of many knives while just looking at smurfy auction pics and reviewing them on a phone.
Gray mags layers alone have at least 3 main variants. More, if the adjacent liner and brass spacer/collar and misc. gray bezel types…way more.
-
Hey Kama,
I hope this works! Here are the pics. It looks like it just needs a new bail fitted on, the contact points are still there. Let me know if this looks doable.
[attach id=3 msg=2315962]




-
@Ritornello said:
Hey Kama,I hope this works! Here are the pics. It looks like it just needs a new bail fitted on, the contact points are still there. Let me know if this looks doable.
[attach id=3 msg=2315962]
Hey Rit,
Pics are perfect and just what I needed to see.

It’s absolutely doable. Pin looks good enough to reuse. I was just working on my no-drill rivet removal on an early ‘60s Huntsman LNF in need of some repairs. So getting the broken bail end off won’t be a problem at all, whichever way. That’s the good news.
The not so good news is that I’m planning on making tooling to fabricate shackle ends faster. That project has been on the back burner for a while and I’d like to get that done before I make another. At least that was my plan.
I’ll PM you later about some of the timing details and some other thoughts.
Happy that the no-drill rivet removal worked here with the focus on not removing/cutting the nickel silver material (much) to get it to release.


-
Pics are perfect and just what I needed to see.

It’s absolutely doable. Pin looks good enough to reuse. I was just working on my no-drill rivet removal on an early ‘60s Huntsman LNF in need of some repairs. So getting the broken bail end off won’t be a problem at all, whichever way. That’s the good news.
The not so good news is that I’m planning on making tooling to fabricate shackle ends faster. That project has been on the back burner for a while and I’d like to get that done before I make another. At least that was my plan.
I’ll PM you later about some of the timing details and some other thoughts.
Happy that the no-drill rivet removal worked here with the focus on not removing/cutting the nickel silver material (much) to get it to release.

Sounds great Kama! Looking forward to hearing from you. Whatever you decide to do, don't feel pressured. I'm very curious about that shackle fabricator, seems like you're a regular MacGyver.
-
@Ritornello said:
Sounds great Kama! Looking forward to hearing from you. Whatever you decide to do, don't feel pressured. I'm very curious about that shackle fabricator, seems like you're a regular MacGyver.Thanks for that, but any pressure is pre-existing and internally generated! I’ve been meaning to set things up for a while to do projects like this. I should thank you for giving me one more reason to move things along faster. Shipping/receiving…websites…payments…terms and conditions…so many moving parts! And that’s the stuff that has nothing to do with the actual work! So far, I’ve only tended toward projects that I find or furnish all the parts so the ‘sale’ only occurs after the work is completed and ready to ship. I've been contacted occasionally about doing service, repair, and mod work, but so far I’ve only been able to respond ‘no’ or ‘not yet’…
Anyway, checked off some items in the to-do list today regarding such logistics. I’ll have to owe you that PM for now.
-
@kamakiri said:
Thanks for that, but any pressure is pre-existing and internally generated! I’ve been meaning to set things up for a while to do projects like this. I should thank you for giving me one more reason to move things along faster. Shipping/receiving…websites…payments…terms and conditions…so many moving parts! And that’s the stuff that has nothing to do with the actual work! So far, I’ve only tended toward projects that I find or furnish all the parts so the ‘sale’ only occurs after the work is completed and ready to ship. I've been contacted occasionally about doing service, repair, and mod work, but so far I’ve only been able to respond ‘no’ or ‘not yet’…Anyway, checked off some items in the to-do list today regarding such logistics. I’ll have to owe you that PM for now.
Alrighty Kama, I do hope you can get all that going sometime soon! Looking forward to it!
-
@Ritornello said:
Alrighty Kama, I do hope you can get all that going sometime soon! Looking forward to it!
Work on the tooling started today and is progressing quickly! Testing with other material was promising on the prototype/beta tooling and work has started on the permanent stuff. That’s today's good news.
The not so good…I came up with a better idea for the tooling. So I need to figure out the materials and blanks I gotta order. At least that won’t slow the progress with the existing tool setup.
Proof of concept/process on left, OEM on right.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login