Rabbit hole - EDC light
-
Rabbit hole indeed!
Here’s a Mini2 that’s bound to tag along with my Mini Tool.

-
I picked up a new light with the intent of possibility giving it to my wife’s keychain. I previously posted on the other thread that she’s more used to clicky lights rather than twisties.
I’ve been carry the Lumintop Frog for a couple of days already. It’s my first ‘complicated’ interface where a couple of quick blinks might mean something or probably just nothing. I’m not sure how my wife would take to that. The beam is also not white but rather warm yellow. I would have preferred white though. All the while I thought all LED lights were white.
What I like about it is that it’s small, it’s a clicky, it’s rechargeable (albeit it needs a charging base), and I’m getting the hang of the ramp up/ramp down of the beam intensity.

-
@Zephon said:
I picked up a new light with the intent of possibility giving it to my wife’s keychain. I previously posted on the other thread that she’s more used to clicky lights rather than twisties.I’ve been carry the Lumintop Frog for a couple of days already. It’s my first ‘complicated’ interface where a couple of quick blinks might mean something or probably just nothing. I’m not sure how my wife would take to that. The beam is also not white but rather warm yellow. I would have preferred white though. All the while I thought all LED lights were white.
What I like about it is that it’s small, it’s a clicky, it’s rechargeable (albeit it needs a charging base), and I’m getting the hang of the ramp up/ramp down of the beam intensity.
Very nice! Looks like a cousin of the GT Nano. You can turn off the ramping for more conventional modes in the UI, as well as turn off that switch LED to lower parasitic drain.
I'll probably pick one of these up, in case you didn't know you can grab extension tubes for them that allow a 10440 (AAA sized li-ion) for longer run times.
-
Thanks!
Yes, it’s a new take on the GT Nano — more flood instead of more throw, is what I believe how the flashlight people describe it.
I’m starting to like the ramping up/down UI as it allows me to pick the goldilocks zone of brightness. I’m also learning how to activate strobe and select thru it, though not perfectly. I’m also more comfortable in engaging the button lock without accidentally getting into the “momentary mode” of press-to-light-hold-to-keep-on.
The parasitic drain hasn’t bit me yet by draining the battery when I need it most. I’m more annoyed by the flashlight blinking when hit by a particular level of impact (I can slam it on my wrist and it won’t blink but when it shakes while I take out my keys, it blinks twice)
Anyway, yes I have a 10440 tube with battery on the way (from China). What made me face palm is that I should have bought the 10440 tube of the GT Nano with a flat bottom instead of the Frog’s 10440 tube which looks just like the 10180 tube. That way I can place it down on the shelf ‘like a candle’.
I’m also thinking if I should get the 2x AAA long tube….for AAA batteries.
My fingers aren’t used to doing more than 3 clicks so I’m having challenges in exploring all other UI options (Windows vs Narsil
)I’ve been using it for a week or so and I’m liking it and yes, it does seem to need the longer tube.

-
Good you found a light. I enjoy playing with new lights especially if the UI is new to me. This way I learn the light but also create some muscle memory.
-
Thanks Aloha! I agree about the muscle memory. It seems that it should apply to flashlights too, and not just MTs.
Regarding the parasitic drain, it seems like I spoke too soon! This morning the Frog started to do the blinking-then-step-down sequence to indicate low voltage. It only lasted 3-4 days since last charge, with daily play…. I mean use.
I found a way to turn off the LED on the switch but I don’t want to confuse it with the torch being on button lock. I’ll have to try to see which works.
-
Got a new toy to tinker with here. It’s my first 16340 powered flashlight. It’s a Trustfire MC1.
It’s funny that after getting used to the Narsil UI of the Lumintop Frog, I’m finding the MC1 ‘too simple’. It is unique though. A long 2-second press turns it On/Off and a quick press shuffles between L-M-H. A 6-second press activates the strobe.
I like it in its simplicity. I like the flood, throw, white beam of the MC1. Charging is via proprietary cable. I’d like to explore using a battery from another brand - a 16340 that charges on its own USB cable - for more flexibility.

-
Looks like you've gone a little ways down this rabbit hole. There's quite a long way yet
. Funny how the UI is now too simple :D. Part of the fun of lights are the UI. Of course high output is also really fun. -
Lights are definitely a rabbit hole. I fell down it a few years ago.
My current favorites are the Mateminco CSF-04, HDS Rotary, Acebeam Rider RX and Fraz Labs Tiny Nugget slim.
The Mateminco is always on my keychain. It could easily fulfill most people’s edc light needs. The ramping is great and once learned is such a nice feature.
The Acebeam, I have been liking more for the fidget factor, but it is still a nice light.
The HDS is just a masterpiece of a light. It is an awesome UI and very reliable. My edc one has seen drops, extreme temperatures, wet conditions, etc and just keeps working. Some consider it “not bright enough” but it is sufficient for many daily needs. If I had to choose just one light, this would probably.be it.
The Tiny Nugget is just as foolproof and bombproof as a light can get. It is also very simple to use. Perfect for emergencies.
-
Yes, it’s a new take on the GT Nano — more flood instead of more throw, is what I believe how the flashlight people describe it.
I’m starting to like the ramping up/down UI as it allows me to pick the goldilocks zone of brightness. I’m also learning how to activate strobe and select thru it, though not perfectly. I’m also more comfortable in engaging the button lock without accidentally getting into the “momentary mode” of press-to-light-hold-to-keep-on.
The parasitic drain hasn’t bit me yet by draining the battery when I need it most. I’m more annoyed by the flashlight blinking when hit by a particular level of impact (I can slam it on my wrist and it won’t blink but when it shakes while I take out my keys, it blinks twice)
Anyway, yes I have a 10440 tube with battery on the way (from China). What made me face palm is that I should have bought the 10440 tube of the GT Nano with a flat bottom instead of the Frog’s 10440 tube which looks just like the 10180 tube. That way I can place it down on the shelf ‘like a candle’.
I’m also thinking if I should get the 2x AAA long tube….for AAA batteries.
My fingers aren’t used to doing more than 3 clicks so I’m having challenges in exploring all other UI options (Windows vs Narsil
)I’ve been using it for a week or so and I’m liking it and yes, it does seem to need the longer tube.
I had never heard of the Frog, but might have to look into it. I do like ramping lights.
-
@GearedForwards said:
I believe all of Luimintop's lights in that family have the ramping UI as default, the GT nano is a thrower version of the frog (or rather, vice versa).Thanks. I have tried a few of their lights, but the only ones I knew with the ramping were the FW ones.
-
Soooo, it’s not as deep a rabbit hole as my SAK and LM stuff. I guess the addiction comes from the fact that for a little more than USD20-30, you can get a darn good light (with a lot of UI fidget factor).
I got to test the Lumintop Frog with a 10440 battery and tube as pictured below. I basically kept it with my keys. My conclusion is that unless I'm going to use it every now and then, it’s best to keep it in button lock to prevent accidental light up in my pocket. I also learned how to turn off the LED on the button after every use.
The Trustfire MC1 is a different animal. No ramping UI and it takes a 2second press to turn on/off. The 16340 battery is pretty interesting as well.

-
@Zephon said:
Soooo, it’s not as deep a rabbit hole as my SAK and LM stuff. I guess the addiction comes from the fact that for a little more than USD20-30, you can get a darn good light (with a lot of UI fidget factor).I got to test the Lumintop Frog with a 10440 battery and tube as pictured below. I basically kept it with my keys. My conclusion is that unless I'm going to use it every now and then, it’s best to keep it in button lock to prevent accidental light up in my pocket. I also learned how to turn off the LED on the button after every use.
The Trustfire MC1 is a different animal. No ramping UI and it takes a 2second press to turn on/off. The 16340 battery is pretty interesting as well.
You need to try the throwers next of course, maybe the lumintop nano...

-
@GearedForwards said:
You need to try the throwers next of course, maybe the lumintop nano...
At one point I was tempted to get the Lumintop Nano but it turns out I can get a better deal elsewhere with the same amount of money.
I also found out the hard way that the tubes of the Nano won’t properly fit in the Frog — I ordered a AAA adapter which, according to the store, would fit the Frog as well. It doesn’t. The head of the Frog doesn’t go deep enough for the terminals to make contact with the stacked AAA. O well. Not sure if it’s worth the effort to return/refund.
Like what I was saying, for the price of a Nano I think I’d rather try something from Sofirn. Preferably something with USB-C charging

-
@Zephon said:
At one point I was tempted to get the Lumintop Nano but it turns out I can get a better deal elsewhere with the same amount of money.I also found out the hard way that the tubes of the Nano won’t properly fit in the Frog — I ordered a AAA adapter which, according to the store, would fit the Frog as well. It doesn’t. The head of the Frog doesn’t go deep enough for the terminals to make contact with the stacked AAA. O well. Not sure if it’s worth the effort to return/refund.
Like what I was saying, for the price of a Nano I think I’d rather try something from Sofirn. Preferably something with USB-C charging

The nano is primarily a bit of fun really, if you're looking for value form a tool then I'd agree looking at other lights would be a better choice. Depending on the gap you need to fill, you could use a magnet, or a bit of folded cooking foil, to bridge the contacts. I uses cooking foil to allow another light to accect the same cell as the Frog and nano, to make it rechargeable.
I'd encourage you to look at the Rovyvon E3 for an interesting, but affordable, USB-C light.

-
@GearedForwards said:
The nano is primarily a bit of fun really, if you're looking for value form a tool then I'd agree looking at other lights would be a better choice. Depending on the gap you need to fill, you could use a magnet, or a bit of folded cooking foil, to bridge the contacts. I uses cooking foil to allow another light to accect the same cell as the Frog and nano, to make it rechargeable.I'd encourage you to look at the Rovyvon E3 for an interesting, but affordable, USB-C light.

I haven’t tried the Rovyvon E3 but the Rovyvons I have tried were quality lights.
-
@Sos24 said:
I haven’t tried the Rovyvon E3 but the Rovyvons I have tried were quality lights.The E3 is an Angel Eyes model (so two emitters) with an Aluminium body. The really interesting part is that it's truly dual fuel, a built in LiPo battery that charges from USB-C, but you can also put a AAA in it and swap between them in the interface. It's both really weird and really neat, I use a higher capacity Eneloop Pro in mine and it works well.
-
After constantly doubting the seller’s reply and almost returning my purchase, I finally got the AAA tube to work.
I’ll save this setup for ‘emergencies’ when there’s absolutely no way to charge the 10440 cell.

-
It looks ridiculous and I want it

How's the output on AAAs?
Did you just have to really crank the tube down for a good connection between the contacts?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login