The Fantabulous February MiniTool Challenge!!!!! 2022
-
Great pics Adam, Steve and Rich

Always love to see the 2D Phillips mod as well, Steve

Adam, you need to adjust that knife :ahhh I usually use the handle extension as a blade cover when opening and closing mine

-
Day 1 of 28
Used the wire cutters to cut some plastic banding today and it worked great

No in use pic though



-
The blade on my mini is hard to open too but I suspect it is because of the safety feature that prevents it from opening when the handle is fully extended (unfolded). You definitely have to intend to open it, it's not ever going to get floppy and open by itself. It also takes some force to close it but that's fine with me.
-
Used the file/straight driver to tighten set screws for a recessed can fixture:

@Poncho65 said:
Adam, you need to adjust that knife :ahhh I usually use the handle extension as a blade cover when opening and closing mine
Thanks for the suggestion! That is a much safer way to open and close the blade.
-
@Adam5 said:
Used the file/straight driver to tighten set screws for a recessed can fixture:
Thanks for the suggestion! That is a much safer way to open and close the blade.
Great use
and Tim Leatherman actually told me himself :o that he designed the knife blade and handle extension that way for safety 
-
I have met him twice and had a few things each time with me
;) :DReally nice guy and since it was at SMKW both times there wasn't an extremely long line because mainly knife peeps are there and not as many MT peeps

-
I'll probably be carrying my modified Mini for most of the challenge but I will also carry my BO Mini on some days. I repaced the small blade with a flathead modified into a 2D Phillips like found on the Micra Phillips Mini Mod
[attach id=0 msg=2315467]
That is absolutely perfect! If ever I get my hands on a stainless Mini and spare parts, I’d like to try this mod!
-
**Day 02
February 02**
If there’s something I think the Mini is perfectly suited for, it’s precision work. I don’t have pictures but the Mini came in handy when I was playing with the nib of a (broken) iPad stylus of the kids.
When the challenge was about to begin, I was playing around with various options on how/what to carry with the Mini:
- Mini with a flat philips — unfortunately, I doubt I can get enough grip to have enough torque to twist a screw in or out.
- Mini with a LM flat bit — could work as a pry bar but has same problem as #1 above.
- Mini with Vic scissors — Yes, scissors from a Swiss Card will fit in that small space beside the Mini. No scissors, no problem!
- Mini with 58mm SAK — match made in heaven, do you think?
Unfortunately, these options all lead to one thing — me not using the Mini. Maybe if this was a ‘Mini Tool Kit’ challenge, I’d be game with a 58mm and the Mini but I’d like to give as much attention to the Mini as much as possible. I don’t wanna break it or damage it, but I don’t want to push it aside either.




-
Day 1
Decided to go ahead and take the mini to work without a backup MT as I had been planning. What's the worst that could happen.

here is my Mini after picking up weird stuff off the floor of a construction site.

-
Day 2
Used the Mini Tool to unpackage SOG's version of the TL-29:

-
Unlike a traditional TL-29, both the spearpoint and the screwdriver blade have back locks.Unfortunately, the location of the cutout for unlocking the spearpoint is near the end of the handle. I found it awkward to manipulate this morning.
-
Great Day 1, peeps

Already a great start to Day 2 by Zephon and Adam as well

-
Day 2 of 28
Coffee with the BO :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh



This isn't the one I carried today but I wanted to include it anyways
:D -
Don't scratch it! That's the one I hope to inherit

-
Day 2
I decided to put a suspension clip on my :ahhh Mini :ahhh . I have a few long Keysmart pocket clips that are just gathering dust (you have to buy them in a set - 1 short, 1 long), so I decided to try one because the :ahhh Mini :ahhh is just short enough that it might work. After carrying it around a little, I think this clip is a good match (although I would still prefer the shorter one).
Yesterday I mentioned that I needed to carry something with a Philips head screwdriver, preferably something small... I decided to carry my new Midnight Manager. The size is perfect, but the screwdriver is nowhere as study/durable as a Leatherman. I am sure it's meant for very light duty only, but I'll give it a try. If it turns out to be too flimsy for my need, I'll probably swap it out for a Micra or a Super Tinker.

-
When the challenge was about to begin, I was playing around with various options on how/what to carry with the Mini:
- Mini with a flat philips — unfortunately, I doubt I can get enough grip to have enough torque to twist a screw in or out.
- Mini with a LM flat bit — could work as a pry bar but has same problem as #1 above.
- Mini with Vic scissors — Yes, scissors from a Swiss Card will fit in that small space beside the Mini. No scissors, no problem!
- Mini with 58mm SAK — match made in heaven, do you think?
Unfortunately, these options all lead to one thing — me not using the Mini. Maybe if this was a ‘Mini Tool Kit’ challenge, I’d be game with a 58mm and the Mini but I’d like to give as much attention to the Mini as much as possible. I don’t wanna break it or damage it, but I don’t want to push it aside either.
We both have the same dilemma. If my :ahhh Mini :ahhh wasn't primarily a collection piece, I would do Steve's mod right away.
-
Hello and welcome to Day 2.
My BO today.

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
(where's the "green with envy" emoji?) :P
:D