DIY sewing project : the "perfect" EDC chaise (that may never succeed)
-
@kottskrapa said:
Cool project! And if this is your first try then I can't think of what it would look like when you get your skill to the next levelThank you!
It is not my very first time with a sewing machine, but it is my first real/serious project :-) (including learning techniques to put bias, french seam, zipper, lining etc)
Sadly, my skill on new things usually skyrockets in the first few days and then stay flar forever
-
to your wife for being a great teacher. Your packs are well thought out and turned out wonderful. I love all the individual secure components. While Maxpedition does a great job with their elastic interiors I do feel a few more loops are needed ( in my Micro and EDC pouches ). I hope they give you years of service. -
@Aloha said:
to your wife for being a great teacher. Your packs are well thought out and turned out wonderful. I love all the individual secure components. While Maxpedition does a great job with their elastic interiors I do feel a few more loops are needed ( in my Micro and EDC pouches ). I hope they give you years of service.Thank you Aloha,
I hope they will be strong enough to survive a few years, but although I used a solid stitch and material, I am not at the level of what Maxpedition does (in term of toughness and quality)
-
I didn't made much improvement in the EDC chaise project, but I could motivate myself to build a handbag/totebag for my mum's birthday :
It is based on this tutorial :
https://www.youtube.com/watch?v=qEYy-qSV2JUSpecial Features :
- Water repellent fabric for the main part and water resistant fabric for bottom part
- Double ambidextrous YKK zipper (same as you can find on 5.11 LV6)
- Internal zipped (YKK) pocket with hooked lanyard
It is about 5L

.jpg)
.jpg)
.jpg)
-
Still no update regarding the EDC chaise, but I got myself a Elna 1 "Grasshopper" :ahhh :ahhh :ahhh (from 1947), first little project on it : a quick 'n dirty zipped pouch after work time (far from perfect, but not too bad for a first time a new-to-me old timer
).jpg)
.jpg)
.jpg)
.jpg)
-
Best of luck to you, the Elna is a joy to use although it does tend to show it's age (the lack of zigzag is a bit of a pain for some projects). My particular example should probably have the motor rewound or replaced since it smells a bit burnt when I use it. But it's a really neat little machine with some really smart solutions going for it.
-

Mine is in quite good shape but lacks the gear reductor (and that's really sad having this cool accessory missing).
The motor does smell "waiting to start a fire", but after investigation that's oil that went dripping on the rheostat that is just below the motor... that literally burns when the wiring of the rheostat gets burning hot (the slower the stitch the higher the rheostat heats).Lamp placement in the top arm is a little awkward when you think about it : it is an easy way for burning your hands while packing the machine after working with it. And I have so issues with stitch length : it is quite small even on the longer setting (screwing down the pressing foot for a higher pressure helped a little, but it is not perfect)
Still it has very clever features like- automatic clutch on the motor shaft that disengages itself during winding,
- gear reduction kit that also uses the automatic clutch (I hope I'll find one someday)
- knee command so there's no need for a foot pedal
Now that I fell in love with Elna(s), I "need" a 2d or 3rd gen Supermatic (I don't like the design of the 4th gen that marks the turn in Elna's logotype)
-
Second attempt with the Grasshopper : Double zip pouch.
As usual, nice thick YKK zippers, Velcro patch (loops) on the outside, and full Velcro (loop) on one (in)side of the main pouch
Not too bad, but a few things didn't went well, especially the top-stitches...Sadly I cannot use the "super-resistant" Laser thread that I like (It doesn't behave well with the stitch tightening, ... the only sewing machine that I have that takes it is the Singer type 15), so it is "standard" Laser thread instead.
.jpg)
.jpg)
.jpg)
.jpg)
-
Nice job
very interesting machine, I have some old singer my grandmother had laying around from when I got shipped off to college cause it was all in some carry case, I think a merritt 2404, just hemmed two pair of pj’s I got for Xmas, cause those things always come like 4” too long!
JR -
Thx, and nice story, I went to see what kind of machine was this Merritt and actually it features swappable cams like the Elna Supermatic I'm looking for!
-
@m47mu74nt said:
Thx, and nice story, I went to see what kind of machine was this Merritt and actually it features swappable cams like the Elna Supermatic I'm looking for!You mean all those black disks that you can swap out in order to stitch all those diff patterns? Not my pics but the same thing, but yeah I have them all, but I’ve only ever used the standard ///\ one..
JR
-
@MadPlumbarian said:
You mean all those black disks that you can swap out in order to stitch all those diff patterns? Not my pics but the same thing, but yeah I have them all, but I’ve only ever used the standard ///\ one..
JRYes exactly, I know I'd also mostly use the ZigZag .. But the fact you can have virtually an infinite amount of stitches by swapping cams is

-
@m47mu74nt said:
Yes exactly, I know I'd also mostly use the ZigZag .. But the fact you can have virtually an infinite amount of stitches by swapping cams is
Lol,, it’s interesting!
JR -
Still making pouches instead of a bag

double zipper, loops inside and outside, super light ripstop fabric
.jpg)
.jpg)
.jpg)
.jpg)
-
Nice job!

JR -
Thanks

-
I think I might have fixed my machine, normally the string would get so tight and end up snapping when I was sewing something, I had the tension loose but it was still getting tight, I bought some super strong string and it kinda worked but still snapped so I had to look the machine over, I tried taking the one part apart but I got it to loosen up, so I took a piece of scrap and put some normal string on it to run a few lines back and forth and it worked fine, so maybe, just maybe I got it working again?
JR -
Those pouches look great! I'm sure if you opened up some commissions they'd sell

-
@MadPlumbarian said:
I think I might have fixed my machine, normally the string would get so tight and end up snapping when I was sewing something, I had the tension loose but it was still getting tight, I bought some super strong string and it kinda worked but still snapped so I had to look the machine over, I tried taking the one part apart but I got it to loosen up, so I took a piece of scrap and put some normal string on it to run a few lines back and forth and it worked fine, so maybe, just maybe I got it working again?
JRThat'd be great!
Mine sometimes winds up the thread around the bobbin pole, so it ends up making a knot and locking it down@GearedForwards said:
Those pouches look great! I'm sure if you opened up some commissions they'd sell
Thank you,
They might, but I'd need to sell them quite highly priced depending of the fabric used. And not sure quality is high enough for sellable products
-
It’s this thing right here, it’s suppose to keep a tension on the string but only so much, but mine was literally locking onto it and causing the string to snap, even though I had the tension as light as possible, but I kinda did a little finesse with a screwdriver and I think it worked??
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login