Leatherman Garage
-
My take is if the Garage releases are successful, they will be production release of same or similar designs in the future. They cannot have all tooling in place for just $100k sale. The sale is not their target, it is all the hypes, exclusivity... to rile up attention to the brand again. I mean, there has not much excitement about the brand lately. Look at their sales, you would think the Tread Tempo would have flied off the shelf like hot cakes, but was not the case.
I am done with being disappointed about not getting one. :) The only disppointment I have left is with the 420HC and 17-4 stainless used on this tool. I would expect at least a 154CM main blade at that price point.
Congrat to those snatching some. I hope you are able to find some screws to test out those 6 different screw drivers. :D
-
@chrono said:
My take is if the Garage releases are successful, they will be production release of same or similar designs in the future. They cannot have all tooling in place for just $100k sale. The sale is not their target, it is all the hypes, exclusivity... to rile up attention to the brand again. I mean, there has not much excitement about the brand lately. Look at their sales, you would think the Tread Tempo would have flied off the shelf like hot cakes, but was not the case.I am done with being disappointed about not getting one. :) The only disppointment I have left is with the 420HC and 17-4 stainless used on this tool. I would expect at least a 154CM main blade at that price point.
Congrat to those snatching some. I hope you are able to find some screws to test out those 6 different screw drivers. :D
Benchmade and Spyderco have been doing this for years. It’s a great business move. At least on their end anyways. Now hopefully they can come out with some new users and some tools with some premium scales. Maybe some other G10 colors like jade, neon green, safety yellow, etc.
-
Why? Because I couldn't buy one.
-
Playing with new plier heads is neat, but am I only the only one that looked at this and primarily just saw preexisting tools/frame?
Super short runs and higher pricing with the justification they won't be taking the steps necessary to mass produce sounded like we were going to get some interesting new stuff, not engineers playing lego with the parts bins.
I've been more excited by Sam Lin's (?) mods in the forum.
-
There are currently 6 for sale on eBay. I look for a run on them from people who bought multiples. Then they will dry up once they primarily fall into the hands of collectors.
-
@GearedForwards said:
Playing with new plier heads is neat, but am I only the only one that looked at this and primarily just saw preexisting tools/frame?The chisel is also completely new, and the small bit driver looks to be a different design. I would have liked more changes too, but every additional change of that magnitude would add to the cost of the tool. For me, $199 seemed like a good balance of price vs interesting changes.
-
I like the chisel and the pliers will be interesting. I think some of the tools are not great and would have rather had a large bit exchanger in lieu of some of the other tools like the depth gauge ruler thing and maybe the file. Still pretty cool looking tool from the pics. 8)
-
@powernoodle said:
The Mr. Crunch was envisioned by the worker man, designed by the worker man, manufactured by the worker man, marketed by the worker man, sold by the worker man, and delivered by the worker man to worker men whose daily labors happily and voluntarily paid the salaries of each of the foregoing worker men. From this you may take great solace, good sir.
The worker man-collector with a fat wallet, a rare kind as far as I know.
I am a physician, I can buy that, although I won't. For most workers I doubt. No offense, just my subjective opinion.Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
I remember the blunt pliers on the Surge thing, but to me it really did not serve a purpose for me. Perhaps Leatherman lept on that to give a choice from blunt-node and needle-nose. Still, the handles was filled with too much flat things it looked "rushed". A bit driver would of been loads better. And that poor excuse of a file. Meh. Glad I missed the sale. Would not of bought one even if I was a wealthy man. Am not much into collections, stuff that sits around and hoping you can make a few buck on.
The craze prolly made them sell on eBay. Past that I doubt the tool will be any more than a shelf queen. And if it broke and they paid $600 for it, they only get $200 gift certificate if they cannot fix it un the Leatherman warranty.
Have a Leatherman Zippo Pin-up Girl Lighter that I probably will not use. Judy Warner gave it to me though, so it's a keeper! :D

-
Saw this on Google News: https://gearjunkie.com/knives/leatherman-mr-crunch-multi-tool-innovation-garage

Open Image in a new tab, or download, and get a better view. -
Someone at a LM Facebook Group said that they only put out 500 of these because that is what Tim's first order with Cabelas was for. Maybe these next Garage Tools will have a little more availability.
-
Per Twitter:


-
@powernoodle said:
Per Twitter:

It's kind of sad that they put what looks to be a very nice chisel on what is essentially a shelf queen. I hope to see that option on some user tools soon.
-
@genevabuck said:
It's kind of sad that they put what looks to be a very nice chisel on what is essentially a shelf queen. I hope to see that option on some user tools soon.Have we actually seen the chisel properly yet? All the pictures seem to be from the flat side, no grind.
-
@Rich_SD said:
The chisel is also completely new, and the small bit driver looks to be a different design. I would have liked more changes too, but every additional change of that magnitude would add to the cost of the tool. For me, $199 seemed like a good balance of price vs interesting changes.Eh, $200 is a huge amount of money for a multitool, I'm not convinced that a single tool fabrication increases the price that much, particularly when 90% of the tool is stock parts.
It would have been nice to see different steel in use at the very least, when it comes to blade steel Leatherman seems stuck 15 years ago.
-
They, LM certainly heard many of us ask for blunt nose pliers. Pretty interesting approach I'll say. Many also liked the OG Wave scissors vs the new Wave scissors, is that what I'm seeing on these? Pretty cool thats for sure. I am enjoying the frame this is on, simple industrial IMO.
I have to say that 200 is not what I was thinking as far as price so
. Being a 500 limited run certainly helps me feel ok about the price. Were they being conservative with engineering? Now that its out we can pick it a part ( no pun ).My opinion. IF they want to build a tool based off existing parts fine. I have no problem with that. We've talked about a pick your part tool anyways.
Blade Exchanger. This way no need to use space for a file or saw. Many love the diamond file anyway so this would have been a really good choice. Offer more BE accessories.
Bit Driver. While some are not fans, I am. This eliminates many of the drivers. This also opens the tool up for their new ratchet bit extender.
The two implements above also add sales. Many who don't have the bit kit or bit driver accessories will go out and get them.
Chisel. Love me some chisel goodness. Vic got me spoiled. I've modified a flat driver for my Surge. I'd add that the chisel would be awesome if it was cut like or similar to Vics.
Knife blade. They already have 154 and S30 so why not use one on this tool? I think if it added 25 or 50 these would have still sold out.
They've got engineers so the rest they could have thought up or used some ideas many have come up with over the years.
-
The pliers part claims retractable. Am guessing the needle nose flip out from the pliers channel and slide over the blunt nose, perhaps rotating upwards and sliding down to lock into place? That whole area could of used a video to show its effect. Photos did not do it any justice.
Will have to wait for one of you rich folk to post more details, or find something on YouTube.
Too many flat pieces in the handles... :ahhh
-
I am not feeling 200 is a stretch. Yes its a lot of money. Yes it's likely to be a shelf queen for many. I'm good with that as well. I used to feel every tool needed to be used. Funny enough I bought all mine previously used so
. Many of my tools are now in rest. I use the ones I found to be the best fit for me. I do have a few new tools that are queens.Use is subjective when I apply it to certain tool I have. If by owning the tool and all that comes with ownership brings a certain happiness then its being used.
Many tools are industrial art pieces. Yeah they produced thousands but they started from an idea then drawing. The patent drawing themselves are pretty flipping cool. Its the evolution of a company, industry, tool category, and hobby for many of us. We all have our opinions and this is MTO.
-
Some of these designs look cool but Leatherman is getting ridiculous chasing the hypebeast, limited edition, collector culture.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login