Leatherman Garage
-
They, LM certainly heard many of us ask for blunt nose pliers. Pretty interesting approach I'll say. Many also liked the OG Wave scissors vs the new Wave scissors, is that what I'm seeing on these? Pretty cool thats for sure. I am enjoying the frame this is on, simple industrial IMO.
I have to say that 200 is not what I was thinking as far as price so
. Being a 500 limited run certainly helps me feel ok about the price. Were they being conservative with engineering? Now that its out we can pick it a part ( no pun ).My opinion. IF they want to build a tool based off existing parts fine. I have no problem with that. We've talked about a pick your part tool anyways.
Blade Exchanger. This way no need to use space for a file or saw. Many love the diamond file anyway so this would have been a really good choice. Offer more BE accessories.
Bit Driver. While some are not fans, I am. This eliminates many of the drivers. This also opens the tool up for their new ratchet bit extender.
The two implements above also add sales. Many who don't have the bit kit or bit driver accessories will go out and get them.
Chisel. Love me some chisel goodness. Vic got me spoiled. I've modified a flat driver for my Surge. I'd add that the chisel would be awesome if it was cut like or similar to Vics.
Knife blade. They already have 154 and S30 so why not use one on this tool? I think if it added 25 or 50 these would have still sold out.
They've got engineers so the rest they could have thought up or used some ideas many have come up with over the years.
-
The pliers part claims retractable. Am guessing the needle nose flip out from the pliers channel and slide over the blunt nose, perhaps rotating upwards and sliding down to lock into place? That whole area could of used a video to show its effect. Photos did not do it any justice.
Will have to wait for one of you rich folk to post more details, or find something on YouTube.
Too many flat pieces in the handles... :ahhh
-
I am not feeling 200 is a stretch. Yes its a lot of money. Yes it's likely to be a shelf queen for many. I'm good with that as well. I used to feel every tool needed to be used. Funny enough I bought all mine previously used so
. Many of my tools are now in rest. I use the ones I found to be the best fit for me. I do have a few new tools that are queens.Use is subjective when I apply it to certain tool I have. If by owning the tool and all that comes with ownership brings a certain happiness then its being used.
Many tools are industrial art pieces. Yeah they produced thousands but they started from an idea then drawing. The patent drawing themselves are pretty flipping cool. Its the evolution of a company, industry, tool category, and hobby for many of us. We all have our opinions and this is MTO.
-
Some of these designs look cool but Leatherman is getting ridiculous chasing the hypebeast, limited edition, collector culture.
-
@Aloha said:
I am not feeling 200 is a stretch. Yes its a lot of money. Yes it's likely to be a shelf queen for many. I'm good with that as well. I used to feel every tool needed to be used. Funny enough I bought all mine previously used so
. Many of my tools are now in rest. I use the ones I found to be the best fit for me. I do have a few new tools that are queens.Use is subjective when I apply it to certain tool I have. If by owning the tool and all that comes with ownership brings a certain happiness then its being used.
Many tools are industrial art pieces. Yeah they produced thousands but they started from an idea then drawing. The patent drawing themselves are pretty flipping cool. Its the evolution of a company, industry, tool category, and hobby for many of us. We all have our opinions and this is MTO.
I don't think someone has to use what they purchase, one of my knives is a shelf queen because it's limited edition and I don't want to mess up the excellent finish, my issue is more... the concept of this all I guess.
As far as I'm aware this is the first time they've ever done this, yet they've been putting out tools longer than I've been alive, like it isn't even close.
This is the fan base paying for R&D upfront.
That already feels iffy, but if that's going to happen at least take leaps and bounds, actually put yourself out there and act like Tim Leatherman in the early 80s.
-
@GearedForwards said:
Eh, $200 is a huge amount of money for a multitool, I'm not convinced that a single tool fabrication increases the price that much, particularly when 90% of the tool is stock parts.It would have been nice to see different steel in use at the very least, when it comes to blade steel Leatherman seems stuck 15 years ago.
Don't get me wrong, I would love to see more premium steel choices; however, Leatherman is already doing better than the other major manufacturers of multitools. The latest from Victorinox, the Swisstool MXBS, cost me $230 and it just has the soft and inferior mystery steel that they always use. I dont see anything from Gerber either, but at least their prices reflect that.
-
@Rich_SD said:
Don't get me wrong, I would love to see more premium steel choices; however, Leatherman is already doing better than the other major manufacturers of multitools. The latest from Victorinox, the Swisstool MXBS, cost me $230 and it just has the soft and inferior mystery steel that they always use. I dont see anything from Gerber either, but at least their prices reflect that.Gotta say that really just feels like how we get Leatherman tools. Vic tools are made in another country, with a high polish, and prices come with that.
The moment you step out of the US LM prices go up very steeply and the secondary market starts to shrink.
I mean a Wave+ costs the equivalent of $153 here, but if you want a new-from-retailer Wave those are the kinds of prices you have to deal with. Swisstools aren't cheap, but the prices don't really seem so erroneous in comparison over here.
-
I may feel like LM jumped on the bandwagon but that band wagon left the station years ago. LM seems to finally just realized why not them. Vic is did it with their damast blade offerings and those sell for crazy prices. Knife companies do it all time time. I have zero problem with any manufacture doing this. I don't chase these items either. Now don't get me wrong I do wished I would have got the Carl Eisner Explorer when it was released
.It does appear the implements on Mr Crunch are recycled from the FREE or T series tools. I am not terribly familiar with either so
. The plier head is neat and once delivered we'll get a look at its operation. I honestly dont feel the cost is out of line. I paid up for a ST300 Micra anniversary set when they came out. Yeah they can ask for a bit more since its limited just like everyone else does."Exclusivity" costs.
@GF I'm not sure the fan/collector is paying RnD upfront
. Not on this tool at least. If the implements are recycled from the FREE/T series then maybe they're recouping? I have no clue obviously. 
Premium steel really should have been used IMO but as I think this thru, I strongly feel this is a collector piece and premium steel didn't make sense.BTW are these numbered? I hope so.
-
For anyone who was on the fence and missed out, there are 2 available online right now. I considered buying a second one to resell for just a second, but that's not the way I roll.

-
Respectfully, I think that many people have the wrong paradigm about corporate entities generally and Leatherman in particular. Leatherman is not in the multitool business - its in the revenue business. Making MTs is only ancillary to the primary goal of increasing share value and producing dividends for the shareholders. So when some of us (not me) complain about the tool set or the design or the price of an MT, it wholly misses the point. Since these aren't potatoes in the midst of a famine, we can buy an MT or not buy it with few consequences except having our feelings hurt when we don't get what we want. We, of course, look at it from the consumer side of things. But Leatherman's goal as to the Mr. Crunch was to generate $100,000.00 in revenue in 29 minutes - which it accomplished. It also fired up the hardcore customer base, generated attention for the brand, etc. I can tell you that while I am not totally enthused about the Mr. Crunch (which did not stop me from buying 2x of them, along with a regular Crunch), the whole "Leatherman Garage" thing has rekindled my Leatherman addiction just a little. If I did not already own every Leatherman I could possibly want, and multiples of many of them, I might very well be getting out my credit card for something new. There's that revenue thing again. So in my view, from both a consumer and corporate perspective, the Mr. Crunch has been a spectacular success.
Thanks for reading.

-
@GearedForwards said:
Vic tools are made in another country, with a high polish, and prices come with that.Sure, Victorinox tools are made nice, but no better than Leatherman. They certainly have nothing that would justify a $230 price tag on a tool made with inferior steel that's literally the tightest multitool I own.
But who am I to talk, I bought one anyway 
-
Not that I would ever use this particular tool, but the retractable needle nose would certainly make using the wire cutters easier in many close quarters applications.
-
@PN, wait LM is not trying cater to me :(.
they sure did a spectacular job at stirring up some commotion. Cudos to them especially after what seemed like a bit of a fail on their last attempt. Heck even that bit of a commotion stirred enough up for the fans. -
@powernoodle said:
Respectfully, I think that many people have the wrong paradigm about corporate entities generally and Leatherman in particular. Leatherman is not in the multitool business - its in the revenue business. Making MTs is only ancillary to the primary goal of increasing share value and producing dividends for the shareholders. So when some of us (not me) complain about the tool set or the design or the price of an MT, it wholly misses the point. Since these aren't potatoes in the midst of a famine, we can buy an MT or not buy it with few consequences except having our feelings hurt when we don't get what we want. We, of course, look at it from the consumer side of things. But Leatherman's goal as to the Mr. Crunch was to generate $100,000.00 in revenue in 29 minutes - which it accomplished. It also fired up the hardcore customer base, generated attention for the brand, etc. I can tell you that while I am not totally enthused about the Mr. Crunch (which did not stop me from buying 2x of them, along with a regular Crunch), the whole "Leatherman Garage" thing has rekindled my Leatherman addiction just a little. If I did not already own every Leatherman I could possibly want, and multiples of many of them, I might very well be getting out my credit card for something new. There's that revenue thing again. So in my view, from both a consumer and corporate perspective, the Mr. Crunch has been a spectacular success.Thanks for reading.

Leatherman is not a publicly traded company. No idea what your talking about with shareholders and dividends and such. It's a private business they don't have any fiduciary duty to public shareholders. They could actually do what Rolex did and become a non-profit foundation if they key stakeholders wanted to do so.
-
Sometimes y'all, sometimes. I just had a read on the LM Garage site on which they clearly state what Mr Crunch is.
"For this inaugural Leatherman Garage release, we're combining our iconic forgotten feature with our most advanced multi-tool to date, the FREE® P4. The P4 is designed with the FREE magnetic technology that allows quick, fluid access to all 21 tools. And the double-pliers snap into place when deployed and stow away when they're not needed. We hope this product inspires new ways to fix, tinker, and solve your way out of problems, just as Tim did in his garage over 40 years ago."
-
@gregpost said:
Leatherman is not a publicly traded company. No idea what your talking about with shareholders and dividends and such. It's a private business they don't have any fiduciary duty to public shareholders. They could actually do what Rolex did and become a non-profit foundation if they key stakeholders wanted to do so.FYI - a lot of companies that are not publicly traded still have shareholders, although I don't know if Leatherman does any kind of profit sharing.
-
@Rich_SD said:
FYI - a lot of companies that are not publicly traded still have shareholders, although I don't know if Leatherman does any kind of profit sharing.Yes, but the way they operate is totally different than a publicly traded company which has a different set of obligations. Leatherman is a private business and from all reporting a very successful one.
They even have this answer on their FAQ page:
*CAN I BUY STOCK IN LEATHERMAN TOOL GROUP, INC.?
Sorry. Leatherman Tool Group is privately held and is very unlikely to go public in the foreseeable future.*
-
@gregpost said:
Yes, but the way they operate is totally different than a publicly traded company which has a different set of obligations. Leatherman is a private business and from all reporting a very successful one.They even have this answer on their FAQ page:
*CAN I BUY STOCK IN LEATHERMAN TOOL GROUP, INC.?
Sorry. Leatherman Tool Group is privately held and is very unlikely to go public in the foreseeable future.*
Understood, but private businesses can still have and issue stocks to employees. I owned private stock like this before, but I was required to sell the stock when I left the company.
Edit: I even earned dividends from those stocks while I owned them.
-
@Rich_SD said:
Understood, but private businesses can still have and issue stocks to employees. I owned private stock like this before, but I was required to sell the stock when I left the company.Edit: I even earned dividends from those stocks while I owned them.
But that has nothing to do with what I said, that's why I said stakeholders. Yes a private business can use shares to represent ownership or something else but that has nothing to do with a fiduciary duty to public shareholders, which is governed by an entirely different set of laws and doesn't apply to Leatherman Tool Group because they're a private company.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login