The Challenge of Champions in 2022!
-
We're just a few days out from the start of the Challenge of Champions!
I hope all you Champions are getting your SAKs sharpened and ready.
Here's a recap of the challenge rules:
• The challenge is open to all Champion models - "a", "b", "c", and Plus. You are welcome to swap out Champions during the challenge.
• Every day carry your Champion and post a photo of it in this thread. Ideally an action shot of it in use, but glamour shots are OK, too.
• Please label each official daily post so the mods can follow your progress easily, e.g. "Day 5".
• We start on March 1, so the challenge will end on March 30.After completing the challenge, please post your thoughts on 30 days of Championing. Will you continue to carry it regularly? Did you find it lacked anything?
Participants completing the challenge will earn the SAK STACK Challenge badge.

-
Excellent!
-
I'm ready to go! I am also issuing myself a sub-challenge to use all of the Champion features over the course of the challenge. This is just for myself, but please feel free to join in if you'd like!
<u>
Champion C</u>
1- Large blade 13- Small blade
2- Corkscrew 14- Can opener
3- Small screwdriver 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer 17- Scissors
6- Phillips screwdriver 18- Magnifying glass
7- Wood saw 19- Fish scaler
8- Hook disgorger 20- Ruler
9- Nail file 21- Metal file
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers 24- ToothpickHere is the Champion I will be using for the challenge.
.jpg)
-
I'll take a shot at it. I've used the full Swisschamp rotation, but not in 30 days. I'm sure I can find some sort of mischief to justify it though.
-
Spoiler:
Can’t find too many uses for the scaler itself. I think the only actual use I’ve had for it is to cut styrofoam.
And I don’t mean the other parts like the ruler or disgorger which I’ve used a fair amount.
-
@BPRoberts said:
I'll take a shot at it. I've used the full Swisschamp rotation, but not in 30 days. I'm sure I can find some sort of mischief to justify it though.Spoiler:
Can’t find too many uses for the scaler itself. I think the only actual use I’ve had for it is to cut styrofoam.
And I don’t mean the other parts like the ruler or disgorger which I’ve used a fair amount.
Awesome BP! Some of the features will certainly take some creativity to find a use for in these modern times. I figure most of them I can use at work. I figure if there is one or two that I can't find a use for, maybe I can just spotlight them in a post. Like kamakiri said,, that scaler is pretty task specific.
-
@GA1dad said:
I'm ready to go! I am also issuing myself a sub-challenge to use all of the Champion features over the course of the challenge. This is just for myself, but please feel free to join in if you'd like!
<u>
Champion C</u>
1- Large blade 13- Small blade
2- Corkscrew 14- Can opener
3- Small screwdriver 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer 17- Scissors
6- Phillips screwdriver 18- Magnifying glass
7- Wood saw 19- Fish scaler
8- Hook disgorger 20- Ruler
9- Nail file 21- Metal file
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers 24- ToothpickHere is the Champion I will be using for the challenge.
Great idea for an optional extra challenge!
How old are your Champion and sheath?
-
@GA1dad said:
Honestly, I really couldn't tell ya. Somewhere between '73 and '85. I am not the original owner.‘73 to ‘76 can be eliminated from what I see in that one pic. The thick 1mm liner did not exist in 91mm until after that and the plastic tweezer head (somewhat) confirms as those don’t show up until ‘77.
So I’m sure it will have the crossbow obverse tang stamp and not the blank rear found late ‘73 into ‘75.
I’ll try to ID more of the tools during the challenge.
-
My pair of Champions is ready!
I have a (mostly) matching set, like a brace of fine dueling pistols.

-
This ‘67 Hoffritz is going to participate. Good enough to use as-is.
.

-
Champion Plus reporting for duty!
-
What's the easiest way to get pics on the forum? Phone>Computer>Forum seems like it's going to get tiring doing daily.
-
Is the inline Phillips sticking out more than it should? The full head is exposed, which isn't true on any of my other knives. Anything I can do about it?


-
-
@BPRoberts said:
Champion Plus reporting for duty!-
What's the easiest way to get pics on the forum? Phone>Computer>Forum seems like it's going to get tiring doing daily.
-
Is the inline Phillips sticking out more than it should? The full head is exposed, which isn't true on any of my other knives. Anything I can do about it?
I upload directly from the phone after resizing to be under the max byte size. Otherwise I host it elsewhere like Flickr to post higher res pics.
The newer styles of inline Phillips with any of the clear mag bezel stick up a few degrees more than the older, longer style that went with the gray mags. Looks normal to me. The old ones were almost flush with the adjacent can opener.

-
-
I haven’t tried modifying one to sit lower, but seems possible to me while apart. Big ‘maybe’ to do it in situ.
-
Thanks for taking a look. It's not a problem, per se, just one of those things that feels wrong. I guess I'll see how much, if at all, it bothers me over the course of the month and go from there.
-
@hsherzfeld said:
My pair of Champions is ready!I have a (mostly) matching set, like a brace of fine dueling pistols.
Very cool!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

