What did you use your Sak on today?
-
EDCed the harvester last night over at a buddies of mine. He had a small brush pile that needed burning according to his wife so I gave him a hand and the harvesters main blade, saw and pruning blade awl came in handy

-
Huntsman on trail today was pure gold!
First time opening a can with a SAK, where I live all the cans have pullers, today the puller got broken, Huntsman to the rescue.
Than the scissors, first for cutting bandage for a cut in a bush, than for a nail that got broken in half on a rock. -
Used the can opener on my Outdoorsman Plus to peel an orange.
-
Used the metal file on my Champ to file down some rough spots on a pocket clip. I was tired of scratching my hand whenever I put it in my pocket. :(
-
Used the Cadet to open this parcel that contained some plus scales I picked up cheap on eBay from a US seller :o Thinking I’m gonna put these on a 90s era Explorer that I’ve got kicking around.


-
Busy day for the old (new) farmer x today.
Cut up a nice peach.
Cut some rubber sheeting to stop a rattle in my car door.
Used to to remove those bloody annoying plastic screw plug thingies in the door.
Cut an annoying branch on the lemon tree, damn that saw is sharp.
Opened a packet of salmon pieces for lunch.
Cut some leather for the new pouch for it.
Used the scissors several times to cut the stitching for the pouch.
And finally......
Used the awl to start a hole for the screw holding my new barometer up on the wall.Then cleaned it and oiled it.
Its been a busy day.
Put it back in the knife cabinet, inside its own little pouch to sleep......good night farmer x. -
Been carrying the Handyman lately

The peek hole had some condensation that 3 days of moving around on the radiators and out the sun did not fix. Decided I'd try the harder way


But the glue wasn't giving up so I thought I'd give it a little push
. The material used for this thing got hot in half a second so I used the pliers of the Handyman to hold it
What I did not realize is that the lens were plastic and did not cope well with fire ::) So the front element got wrinkled. Some sandpaper and Autosol made it better. On the picture I've focused on the lens it's self, focusing on the view gives a decent enough picture. My phone wasn't cooperating so no "view" picture

then I pulled the napkin that's been in the hole of the door for a few days :D

And for a finale - went down the cellar and took a bottle of the 2019 home made wine. Being innovative as I am - it's bottled in beer bottles, just because I had the bottles and did not want to buy wine bottles.

It's tastes good, but definitely different from what it used to be

-
On the early morning putler attacked my homeland I used a large screwdriver on my Work Champ to remove staples from a cardboard that was repurposed as an improvised bed in the basement of our house. No pictures were taken, but it’ll stay in my memory forever.
-
@alexanderre said:
On the early morning putler attacked my homeland I used a large screwdriver on my Work Champ to remove staples from a cardboard that was repurposed as an improvised bed in the basement of our house. No pictures were taken, but it’ll stay in my memory forever.Wishing you well, alexanderre.
Also, a shout-out to Victor (viktryls on eBay). I've bought a lot of scales and parts from him. Stay safe.
My use today was a lot more basic - inline Phillips and the can opener's small slotted tip to tighten door knobs, strike plates, and hinges.
-
@alexanderre said:
On the early morning putler attacked my homeland I used a large screwdriver on my Work Champ to remove staples from a cardboard that was repurposed as an improvised bed in the basement of our house. No pictures were taken, but it’ll stay in my memory forever.Wishing the best for you.
Sent from my iPhone using Tapatalk
-
Stay safe and best wishes, Alexanderre. -
I’m safe and sound at the moment, but not many can say the same around Ukraine. Our army takes invading smurfs down - they have 10 times more casualties than us, but it’s war anyway. This success won’t be possible without huge amount of support from your countries, so on behalf of Ukraine I want to thank you all for it [emoji1317][emoji1317][emoji1317][emoji1255]
-
@alexanderre said:
I’m safe and sound at the moment, but not many can say the same around Ukraine. Our army takes invading smurfs down - they have 10 times more casualties than us, but it’s war anyway. This success won’t be possible without huge amount of support from your countries, so on behalf of Ukraine I want to thank you all for it [emoji1317][emoji1317][emoji1317][emoji1255]

-
Using my Explorer to fit a new stereo in the wife's car:
- Unscrew the fascia and pry it away from the housing
- Unbolt the old stereo
- Transfer the propriertary mounting brackets to the new stereo
- Repin the Honda-ISO wiring harness
- Clip and strip the wires off the back end of the ISO harness
- Strip the wires at the front end of the Made In China harness (because they don't use ISO, apparently)
- Solder the ISO to the MIC harness, although the Explorer was only used to hold some wires out the way at this point
- Refit and rebolt everything back into place
- Remove everything to then add in more soldering for additional functions I hadn't realised could be made to work
- Re-refit and re-rebolt everything back in place
First time fitting a new stereo into a car, too, but it all worked out in the end. My mechanic was more than a little exasperated, and took the smurf a lot 'cause he knows what I'm like with my SAKs, but to be honest I actually got most jobs done in less time than it would have taken him to go get the right size of screwdriver, so I'm quite proud of the fact that it was (fundamentally) all done with just a SAK and a soldering iron!! :D
Alas, no photos, because as usual I'm too busy just getting the job done.
-
@alexanderre said:
I’m safe and sound at the moment, but not many can say the same around Ukraine. Our army takes invading smurfs down - they have 10 times more casualties than us, but it’s war anyway. This success won’t be possible without huge amount of support from your countries, so on behalf of Ukraine I want to thank you all for it [emoji1317][emoji1317][emoji1317][emoji1255]Stay strong, stay safe! Hope this madness ends soon.

-

Our prayers are with you and yours from California.
-
@alexanderre said:
I’m safe and sound at the moment, but not many can say the same around Ukraine. Our army takes invading smurfs down - they have 10 times more casualties than us, but it’s war anyway. This success won’t be possible without huge amount of support from your countries, so on behalf of Ukraine I want to thank you all for it [emoji1317][emoji1317][emoji1317][emoji1255]I'm so glad to hear that Alexanderre!

-
Our prayers are with you and yours from California.

Prayers and well wishes from California and everyone from around the world.
@SteveP said:
Wishing you well, alexanderre.Also, a shout-out to Victor (viktryls on eBay). I've bought a lot of scales and parts from him. Stay safe.

Viktor, cyck…and our MTO brothers out there. Please stay safe.

-
💯
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
