Leatherman Garage
-
@gadgetman7 said:
You might like the Gerber Dual Force when it comes out. Idon’t think multitools are really designed to replace a daily user tool for hard work, they’re more for “what if” situations or when you need something for a simple task but don’t want to get a tool box.
Sent from my iPhone using Tapatalk
Thanks for the heads up
It certainly looks useful, I’ll keep an eye out

Whilst I see your point, I do think manufacturers have become lazy
I’m trying to think what screws near me are slotted head….err….none!! Philips/Pozi yes
When was the last time I needed needle nosed pliers?…err, I honestly don’t even know where my needle nosed pliers are?, blunt nosed, yes.. both cars, emergency tool box under stairs, my bike bag plus toolboxes in garage.Considering the average cost of a leatherman is over £100 here in the UK, and let’s face it, the only real reason for choosing a MT over a SAK is due to the built in plier head, otherwise a SAK will do just as well. Yet the needle nosed pliers are damn near useless in my experience. The wire cutters rarely perform properly, the jaw face is feeble in trying to grip often distorting the jaws out of alignment.
Yep, pulling cotton threads, pulling pins or ???

Whenever I’ve attempted to use MT pliers for a needle nosed task, they were never needle nosed enough so had to go find proper needle nosed pliers!!A £20 pair of pliers and a SAK
Will be vastly more useful in virtually every situation I can think I need pliers for.Let’s hope that Gerber Dual is as good as it looks.

-
@tosh said:
Thanks for the heads up
It certainly looks useful, I’ll keep an eye out

Whilst I see your point, I do think manufacturers have become lazy
I’m trying to think what screws near me are slotted head….err….none!! Philips/Pozi yes
When was the last time I needed needle nosed pliers?…err, I honestly don’t even know where my needle nosed pliers are?, blunt nosed, yes.. both cars, emergency tool box under stairs, my bike bag plus toolboxes in garage.Considering the average cost of a leatherman is over £100 here in the UK, and let’s face it, the only real reason for choosing a MT over a SAK is due to the built in plier head, otherwise a SAK will do just as well. Yet the needle nosed pliers are damn near useless in my experience. The wire cutters rarely perform properly, the jaw face is feeble in trying to grip often distorting the jaws out of alignment.
Yep, pulling cotton threads, pulling pins or ???

Whenever I’ve attempted to use MT pliers for a needle nosed task, they were never needle nosed enough so had to go find proper needle nosed pliers!!A £20 pair of pliers and a SAK
Will be vastly more useful in virtually every situation I can think I need pliers for.Let’s hope that Gerber Dual is as good as it looks.

My need and experience is completely different. I have flathead screws all around me, and I need needle nose pliers to bend/manipulate wires. Also, a SAK is too light weight for many of my needs - a SAK would snap if I tried to use it like I use a more durable tool like Gerber or Leatherman. Don't get me wrong, I like my SAKs, but they're more pocket jewelry than a serious tool.
-
Its always interesting to hear what everyones needs/preferences are. I'd imagine depending on job, hobby, familiarity, etc the tools we decide upon vary.
-
@Aloha said:
Its always interesting to hear what everyones needs/preferences are. I'd imagine depending on job, hobby, familiarity, etc the tools we decide upon vary.How true! I often wish for a Leatherman with diagonal wire cutters instead of pliers or scissors, because in my volunteer work as a robotics team mentor, I constantly find myself needing to cut zip ties. The Leatherman wire cutters are poorly located for cutting zip ties, since you have to get one entire pliers jaw underneath the tie (which is usually too tight to allow such a maneuver).
-
@hsherzfeld said:
How true! I often wish for a Leatherman with diagonal wire cutters instead of pliers or scissors, because in my volunteer work as a robotics team mentor, I constantly find myself needing to cut zip ties. The Leatherman wire cutters are poorly located for cutting zip ties, since you have to get one entire pliers jaw underneath the tie (which is usually too tight to allow such a maneuver).I've found the guthook on the Charge's serrated blade to be pretty useful popping zip ties off.

-
The LM Garage has such an opportunity to really think outside the box. If they are interested in limited runs why not do diagonal cutters? Lines man pliers? I understand there are some wonderful options already on the market but the idea is these would be MT versions

-
I think with their normal tools they are trying to get as many functions as possible. If a tool has needle-nose pliers, they also claim it has regular pliers so that's two functions, plus wire cutters - add another one or two functions (hard wire, stranded etc).
More functions = more marketable.As Aloha says Garage may be an opportunity to briefly step away from that.
-
@43north89west said:
I've found the guthook on the Charge's serrated blade to be pretty useful popping zip ties off.
I have used the gut hook/rescue blade a lot to cut zip ties. It works great.
Sent from my iPhone using Tapatalk
-
Some genius in the packing dept. figured it was okay to send Mr. Crunch in his original cardboard box along with no tamper tape a UPS label and a USPS label stuck right to the cardboard.
:o 
That's no outer box that is** the** box.



-
Yikes! Thankfully no Ebay flippers intercepted it. Mine still out for delivery today...

-
@SteveC said:
Some genius in the packing dept. figured it was okay to send Mr. Crunch in his original cardboard box along with no tamper tape a UPS label and a USPS label stuck right to the cardboard.
:o 
That's no outer box that is** the** box.
Mine arrived the exact same way. I was very disappointed because I wanted to keep the box in my collection.
-

Mine were delivered by UPS with an outer box. I must be special.
-
@powernoodle said:

Mine were delivered by UPS with an outer box. I must be special.
Guessing because you ordered two?
-
@GearedForwards said:
Guessing because you ordered two?I think that Mr. Steve ordered two as well but I could be wrong about that.
-
-
@GearedForwards said:
Guessing because you ordered two?@powernoodle said:
I think that Mr. Steve ordered two as well but I could be wrong about that.I did but separately. I went back for another.
-
Well done on the hairdryer. I haven't used one of those in 40 years, except to apply Talon grips to a new gun. :ahhh
-
Mine just arrived with no "outer" box as well.




Very interesting piece! Few little cosmetic flaws in milling/casting around the pliers, but not totally unexpected given its Garage provenance. As this is my first time touching a Free-based tool, still getting used to its deployment, but it's all quite clever. Actual functionality TBD obviously.
-
Awesome! Yes, mine to arrived day the labels on the box. Peeled them off and now I have a fuzzy box. Oh well. Hopefully my other one will come in a bigger box as I ordered a few other things with it.will know tomorrow.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

