The Challenge of Champions in 2022!
-
DAY 4 I dropped something between my truck seat and the console and thought, "Time for SAK pliers to save the day!" But the Champ is pliers-less. I tried later with my Handyman, but in the end it took my long Irwin needle nose to reach down into the crevasse. The Champ did ride along all morning while doing invasive plant removal.

-
**<u> kamakiri - Day 4 </u> **
Changed to the ‘67 Hoffritz Champion ‘b’ today. This one sports a ‘TAM’ saw…angled teeth and a machined finish typical of this timeframe, as well as the bail/shackle which weren’t discontinued for some main line knives until about 1970. This gives lots of time between ‘68-‘70 for the last bail equipped champions which have the first ‘TSM’ (symmetrical/machined) saws.
Only mail haul duty so far today

Just one knife a Hunter XT and more Knipex pliers… that wouldn’t have likely helped Fireman above. ;)
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘05
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
**

-
Challenge of Champions Day 4
Used the large blade to strip some larger stuff. Didn't figure the official Champion wire stripper would be up to the task.
Champion C
1- Large blade check 13- Small blade
2- Corkscrew 14- Can opener
3- Small screwdriver 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer **check ** 17- Scissors
6- Phillips screwdriver 18- Magnifying glass
7- Wood saw 19- Fish scaler check
8- Hook disgorger 20- Ruler
9- Nail file 21- Metal file check
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers **check ** 24- Toothpick.jpg)
-
Great posts and uses everyone. Loving the variety kamakiri! Really dig the bails!
-
I would, since I gonna be carrying it anyway, but the only Champ I have is the Mini.
Oh well.
-
Day 4
Used the fish scaler/hook disgorger (we'll see which one I need to count it for at the end) to trigger a mouse trap before rebaiting/resetting.
<u>Tools Used</u>
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Mail
Fish Scaler- Mouse trapTools Remaining
Tweezers, Toothpick, Pin, Keyring, Large Blade, Metal File, Metal Saw, Nail Cleaner, Wood Saw, Hook Disgorger, Scissors, Inline Phillips, Mag Glass, Bottle Opener, Flat Driver, Wire Stripper, Can Opener, Small Phillips, Corkscrew, Eyeglass Driver, Reamer, Hook, Technician's Screwdriver, Chisel
-
**Day 4
**
Used the small blade on my Plus to cut open a couple of boxes. A photo op it wasn't, so have to settle for a post-event photo of the blade.

-
@BPRoberts said:
Day 4Used the fish scaler/hook disgorger (we'll see which one I need to count it for at the end) to trigger a mouse trap before rebaiting/resetting.
So does that mean the mouse got the original cheese without springing the trap? Talented mouse.
-
Great shots, y'awl!
-
@SteveP said:
So does that mean the mouse got the original cheese without springing the trap? Talented mouse.Apparently. I didn't set it the first time. I guess we'll see what happens on Monday. Maybe I'll use all the tools on the Champ+ to build increasingly complex Rube Goldberg-esque mouse traps all month.
-
@SteveP said:
**Day 4
**
Used the small blade on my Plus to cut open a couple of boxes. A photo op it wasn't, so have to settle for a post-event photo of the blade.
Those blue scales look quite nice on your Plus!!!
@BPRoberts said:
. Maybe I'll use all the tools on the Champ+ to build increasingly complex Rube Goldberg-esque mouse traps all month.
You Can Do It!!
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 
-
So far, the Challenge of Champions has taught me that a Champion is huge overkill for EDC in an office environment...not that I didn't know that already :D
I would probably find more uses for the Champ if I were spending more time out at our fabrication shop, but my role has shifted to focus more on engineering and less on fabrication. Fine with me, since I get to actually use my mechanical engineering degree, but my SAKs are getting bored. They're not being called on to scrape tape and/or paint off of pipe tags (the chisel would have come in really handy for that!), trim 2x4's for dunnage on truckloads of pipe (wood saw, obviously), or even dig out splinters (from aforementioned 2x4's).
Hopefully now that spring is here, I will get more chances to use the Champ's tools as I start gardening again. I can already foresee potential uses for the wood saw, file, and even the fish scaler.
But once the Challenge is over, I will probably return to the Explorer as my default EDC SAK.
-
<u>Day 05</u>
I used the ruler to get a rough estimate of the depth of a box planter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Excellent work so far fellow Champions! 
Thanks!


