The Challenge of Champions in 2022!
-
@SteveP said:
**Day 4
**
Used the small blade on my Plus to cut open a couple of boxes. A photo op it wasn't, so have to settle for a post-event photo of the blade.
Those blue scales look quite nice on your Plus!!!
@BPRoberts said:
. Maybe I'll use all the tools on the Champ+ to build increasingly complex Rube Goldberg-esque mouse traps all month.
You Can Do It!!
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 
-
So far, the Challenge of Champions has taught me that a Champion is huge overkill for EDC in an office environment...not that I didn't know that already :D
I would probably find more uses for the Champ if I were spending more time out at our fabrication shop, but my role has shifted to focus more on engineering and less on fabrication. Fine with me, since I get to actually use my mechanical engineering degree, but my SAKs are getting bored. They're not being called on to scrape tape and/or paint off of pipe tags (the chisel would have come in really handy for that!), trim 2x4's for dunnage on truckloads of pipe (wood saw, obviously), or even dig out splinters (from aforementioned 2x4's).
Hopefully now that spring is here, I will get more chances to use the Champ's tools as I start gardening again. I can already foresee potential uses for the wood saw, file, and even the fish scaler.
But once the Challenge is over, I will probably return to the Explorer as my default EDC SAK.
-
<u>Day 05</u>
I used the ruler to get a rough estimate of the depth of a box planter.
-
DAY 5 I used the tweezers to remove a few very tiny plant thorns/spines from my work yesterday. No pics because I don't have three hands. They were so fine that I really scraped them out rather than grabbing them, so any tool might have worked as well. Maybe.
I used the small blade to open a box from Beretta. They sent my 92F locking block in its small box, wrapped in heavy paper, wrapped in those air things, in a large cardboard box. That's a lot of protection for something you can't break. ???
Tools used so far:
Lg blade
Sm blade
Tweezers
-
Challenge of Champions Day 5
Today I took a chance and purchased a Fossil watch in very good condition that presumably had a dead battery. I have never owned a Fossil, so I threw caution to the wind. Well,,, the story did not have a happy ending. After using the can opener to remove the case back, and the small blade to open the battery,,,, I found that I had bought a non-operational watch. So I guess I will start looking for a replacement movement. I also purchased an old mechanical watch to tinker with and see if I can get it running again.
Champion C
1- Large blade check 13- Small blade check
2- Corkscrew 14- Can opener check
3- Small screwdriver 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer **check ** 17- Scissors
6- Phillips screwdriver 18- Magnifying glass
7- Wood saw 19- Fish scaler check
8- Hook disgorger 20- Ruler
9- Nail file 21- Metal file check
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers **check ** 24- Toothpick.jpg)
-
**<u> kamakiri - Day 5 </u> **
Changed to an ‘83 Hoffritz Champion ‘c’ (aka Super Knife in Hoffritz speak) for today.
mail call duty of course…and some light help with mods. Metal saw to assist with key ring lug removal (pictured) on an ‘87 Craftsman that’s going into the EDC pile. Also did the scale removal on a ‘13 Champ for parts. One of the mail items was also Hoffritz…so that was just lucky. :)**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘05
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
**


-
Day 5
Several uses today:
Pictured- Scissors to trim a lose thread on my sock, and inline Phillip's to flip the secondary drain on the tub to get a deeper soak.
Not pictured- Small blade to slice some old clothes into rags, and wife using the hook remover as a back scratcher.
<u>Tools Used</u>
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim threat
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment<u>Tools Remaining
</u>Tweezers, Toothpick, Pin, Keyring, Large Blade, Metal File, Metal Saw, Nail Cleaner, Wood Saw, Mag Glass, Bottle Opener, Flat Driver, Wire Stripper, Can Opener, Small Phillips, Corkscrew, Eyeglass Driver, Reamer, Hook, Technician's Screwdriver, Chisel

-
@Fireman said:
DAY 5 I used the tweezers to remove a few very tiny plant thorns/spines from my work yesterday. No pics because I don't have three hands. They were so fine that I really scraped them out rather than grabbing them, so any tool might have worked as well. Maybe.I used the small blade to open a box from Beretta. They sent my 92F locking block in its small box, wrapped in heavy paper, wrapped in those air things, in a large cardboard box. That's a lot of protection for something you can't break. ???
Tools used so far:
Lg blade
Sm blade
Tweezers
If it's something that can't break why did you need a replacement?
-
Day 05
I caught a fingernail on something which left it torn and jagged. Of course, the Victorinox scissors worked like a charm.
-
Great uses today!!
-
Yes, great uses today! Thank you all for participating in this challenge.

**Day 5
**
No use today, but maybe that's not a bad thing for a vintage SAK. Today I carried what's likely a 1963 Champion "a". (A big thank you to kamakiri for helping me last Fall to date it.)I'll carry it again tomorrow so maybe it'll see some action.

-
@BPRoberts said:
Apparently. I didn't set it the first time. I guess we'll see what happens on Monday. Maybe I'll use all the tools on the Champ+ to build increasingly complex Rube Goldberg-esque mouse traps all month.Be sure to post pics. This could get interesting!
-
@SteveP said:
Yes, great uses today! Thank you all for participating in this challenge.
**Day 5
**
No use today, but maybe that's not a bad thing for a vintage SAK. Today I carried what's likely a 1963 Champion "a". (A big thank you to kamakiri for helping me last Fall to date it.)I'll carry it again tomorrow so maybe it'll see some action.

I appreciate all and any opportunities to practice dating knives via pictures!I’ll try to join you tomorrow with something just later than yours like in the ‘64-‘65 range if I can find one in time. I was just digging through more of the ‘70 to mid ‘80s for ones I don’t need to prepare or clean (much) before using. :)
-
@Alan K. said:
If it's something that can't break why did you need a replacement?I almost wrote "it's something you can't break outside of the pistol." There's no way to break it in shipping unless you pound the box with a sledgehammer. They packed it like it was made of glass, whereas Amazon has shipped us a glass jar in a large envelope. The result was exactly what you'd expect.

-
Challenge of Champions Day 6
I had a button pop off some work pants on Thursday,,, needed to get them mended before Monday. Vic scissors worked perfectly for removing the "nest" that the manuf. left on them. I could have sent them in to have the uniform service mend them, but I kinda enjoy the occasional sewing chore.
I'm gonna go ahead and check off the toothpick as well as I use it for it designed purpose almost every day, but don't figure pictures would be appreciated. :ahhh
Champion C
1- Large blade check 13- Small blade check
2- Corkscrew 14- Can opener check
3- Small screwdriver 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer check 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass
7- Wood saw 19- Fish scaler check
8- Hook disgorger 20- Ruler
9- Nail file 21- Metal file **check
**10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers **check ** 24- Toothpick check.jpg)
-
DAY 6 The Champ in action today. Opening a snack for me, and using the measure for scale near a caterpillar (Black Swallowtail) who is munching on dill in the butterfly garden.

Tools used so far:
Lg and Sm blades
Tweezers
Ruler (Imperial)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


I usually botch part of it, but it will get the job done as long as no one can see it.