The Challenge of Champions in 2022!
-
<u>Day 10 (late)</u>
No Champion usage to report yesterday, but I just never had a chance to take a photo. So here’s my attempt at a Champion glamor shot in my office, with my EDC flashlight providing the extra lighting.Note the pocket clip attached to the keyring via a snap clip. It allows the SAK to hang deeper in my pocket than just having the pocket clip attached directly to the keyring, and it allows me to quickly swap the clip between SAKs. How do y’all carry your Champions?

-
Excellent uses and pics, fellow Champions! I gotta crank up my uses…I was just glad I actually used the scaler for something during the challenge. :-\
@SteveP said:
Thanks. I'd guessed that you'd examined multiple examples. That there are other models with the same construction is also interesting. Just leaves the question of why Vic did it. But I suppose that would be hard to know this far on.Sorry about not seeing your reply here…totally bleary-eyed late yesterday. :(
Victorinox broadly made many, many changes for higher quality or durability and lower cost or increased efficiency. So a part could be lightened or made thicker…depending which of the key reasons the change was being executed.
Spoiler:
Regarding this part and why it didn’t last long…it basically got superceded and combined with another liner either at or very close to the same time. My Chonology suggests that that change happened around or within a year from its introduction. Not an uncommon practice and other changes have lived even shorter production lives.@SteveP said:
Always interesting learning about this stuff. Had no idea it was this detailed when I got into SAKs.Yes, and likewise.
Spoiler:
Absolutely had no idea…because as far as I know…it wasn’t done before. And that’s not to say somebody else doesn’t have more details in different time periods. But just for the ‘70s and maybe the ‘80s…I’ve shaken out and identified far more changes than I thought would be possible. In the ‘70s, I stopped counting sometime after I passed 40 changes. The irony is that it’s the huge quantity of changes that allow all the fine divisions of decades and years. The system is inherently high-precision…but lots of work is required to achieve high accuracy. -
DAY 11 No uses, so I imitated hsherzfeld's style.

-
**<u> kamakiri - Day 11 </u> **
Changed to a ‘80 Abercrombie & Fitch advertising knife for Day 11. Used the scaler as a weeder since I’m missing the pliers. Was also missing the pliers for fixing springs on a broken set of Vic pliers on one of the Troubleshooters. Used a set of Knipex instead. Not the 16” set. The Knipex are better for setting the springs anyway, but maybe not better at helping to get the broken spring out since they’re smooth jawed. I have a few of these A&F Champions. This one is the earliest and the latest is NIB and maybe ‘86-‘87 IIRC, and it might make an appearance later in the Challenge. Also used the file, scissors, and magnifier. Picked this one because I wanted a beater for garden duty…but regretting that a bit now that I’m indoors. Not that sharp even to do the mail.
This one is 1980 mainly for the awl. Other construction and ‘progression’ (I think I will call them) details also confirm and narrow the possible range. I believe this knife in particular confirms it as one of the first Champion Cs to sport the ‘new’ black cellidor scales that first only appeared on Champions and either the Classic or SD. I think Classic sounds right. Black scales were used in the past, but I think this is the first or close to it for the Champions.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
**

-
Challenge of Champions Day 11
Today I used the hook disgorger to flip steaks.
Champion C
1- Large blade check 13- Small blade check
2- Corkscrew check 14- Can opener **check
**3- Small screwdriver check 15- Cap lifter
4- Screwdriver 16- Wire stripper
5- Reamer **check ** 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger check 20- Ruler check
9- Nail file 21- Metal file check
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers check 24- Toothpick check.jpg)
-
Mmm, that looks tasty!

-
Day 11
No use today.
-
**Day 11
**A few repeat uses today, slicing lunch and carrying grocery bags. I decided to take a close up of the ding in one of the scales/liners. Not sure what it's from, it was like that when I got it.
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening<u>Tools Remaining
</u>Tweezers, Pin, Keyring, Metal File, Metal Saw, Nail Cleaner, Wood Saw, Bottle Opener, Flat Driver, Wire Stripper, Can Opener, Small Phillips, Corkscrew, , Reamer, Technician's Screwdriver, Chisel
-
***Day 11
Used the big slotted screwdriver and the inline Phillips to take apart a frozen gutter downspout. With freezing water running over my hands, not really a photo op. :(

-
<u>Day 11</u>
I sliced a baguette in half to make a sandwich. This is one of those rare tasks that cause me to wish for a longer blade.
-
DAY 12 I took the Champ on a 5 1/2 mile walk today. Here's the view from a lookout and the Champ flexing.


-
Day 12
Tried GA1dad's teabag trick. Worked great, thanks for showing me a new trick! We had some trouble with a mini-bottle of Godiva, but the can opener took care of it.
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can opener- Bottle(!) opener<u>Tools Remaining
</u>Tweezers, Pin, Keyring, Metal File, Metal Saw, Nail Cleaner, Wood Saw, Bottle Opener, Flat Driver, Wire Stripper, Small Phillips, Reamer, Technician's Screwdriver, Chisel

-
**Day 12
**
Used the small slotted driver on the Plus to pop out a stubborn dying battery. With a new one inserted, the clock is running well now!
-
**<u> kamakiri - Day 12 </u> **
Changed to a 1969 146fmaU Champion B knife for Day 11. Just mail call duty so far, but wanted to note that the only packages to come in for me were from Ukraine 🇺🇦. I really hope our SAK community, friends, family and vendors stay safe and prevail…by negotiation or otherwise.
That aside, this knife is a joy to use as it still sports the factory grinds and is one of the better early Champions I own that is not still in box.
….I know many would almost automatically disagree that my knife with its bail/shackle could be produced in 1969. The real kicker to me is that if I’m wrong…it would be 1970!
Spoiler:
Without getting into the fine little details on this one, I want to focus on what I believe is the error in the way many characteristics are dated. That source is that many incorrectly assume that an introduction of a new item (like the keyring) means the near instantaneous disappearance of the item being (eventually) replaced or superseded (in this case the bail/shackle). Fairly clear proof (to me) comes from knives with the ‘new’ style scissors and double-leaf spring are found in original condition with the bail. Dates for all three of these items are all over the place between ‘68 and ‘75…but it is my belief that they all actually converge upon 1970. End of the main line use of bails, existence of the new scissor and corresponding use of the double leaf scissor spring.So says my detailed analysis. Proof comes from at least three separate production process changes. The fact that this particular knife has only one of these changes leads me to believe it is probably late 1969 or very early 1970, if I am wrong.**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
**



-
Challenge of Champions Day 12
I have a BBQ cookoff next weekend, so it's time to get ready. It was time to put fresh batteries in the thermometer. The Champion's screwdriver was up for the challenge!
Champion C
1- Large blade **check ** 13- Small blade check
2- Corkscrew check 14- Can opener check
3- Small screwdriver check 15- Cap lifter
4- Screwdriver check 16- Wire stripper
5- Reamer check 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger **check ** 20- Ruler check
9- Nail file 21- Metal file check
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers check 24- Toothpick check
BPRoberts,,,, now I'm wanting a cup-o-tea too! 
.jpg)
-
Nice use! Thermapens are totally worth it and almost instantly made me a better cook.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login