The Challenge of Champions in 2022!
-
**<u> kamakiri - Day 12 </u> **
Changed to a 1969 146fmaU Champion B knife for Day 11. Just mail call duty so far, but wanted to note that the only packages to come in for me were from Ukraine 🇺🇦. I really hope our SAK community, friends, family and vendors stay safe and prevail…by negotiation or otherwise.
That aside, this knife is a joy to use as it still sports the factory grinds and is one of the better early Champions I own that is not still in box.
….I know many would almost automatically disagree that my knife with its bail/shackle could be produced in 1969. The real kicker to me is that if I’m wrong…it would be 1970!
Spoiler:
Without getting into the fine little details on this one, I want to focus on what I believe is the error in the way many characteristics are dated. That source is that many incorrectly assume that an introduction of a new item (like the keyring) means the near instantaneous disappearance of the item being (eventually) replaced or superseded (in this case the bail/shackle). Fairly clear proof (to me) comes from knives with the ‘new’ style scissors and double-leaf spring are found in original condition with the bail. Dates for all three of these items are all over the place between ‘68 and ‘75…but it is my belief that they all actually converge upon 1970. End of the main line use of bails, existence of the new scissor and corresponding use of the double leaf scissor spring.So says my detailed analysis. Proof comes from at least three separate production process changes. The fact that this particular knife has only one of these changes leads me to believe it is probably late 1969 or very early 1970, if I am wrong.**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
**



-
Challenge of Champions Day 12
I have a BBQ cookoff next weekend, so it's time to get ready. It was time to put fresh batteries in the thermometer. The Champion's screwdriver was up for the challenge!
Champion C
1- Large blade **check ** 13- Small blade check
2- Corkscrew check 14- Can opener check
3- Small screwdriver check 15- Cap lifter
4- Screwdriver check 16- Wire stripper
5- Reamer check 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger **check ** 20- Ruler check
9- Nail file 21- Metal file check
10- Nail cleaner 22- Metal saw
11- Fine screwdriver 23- Keyring
12- Tweezers check 24- Toothpick check
BPRoberts,,,, now I'm wanting a cup-o-tea too! 
.jpg)
-
Nice use! Thermapens are totally worth it and almost instantly made me a better cook.

-
@kamakiri said:
Nice use! Thermapens are totally worth it and almost instantly made me a better cook.
They are certainly the standard amongst the professionals, but I have a hard time with their pricing. Mine was gifted to me by my BBQ mentor when I placed right behind him in my first cookoff. For that event I used a $9.00 Walmart store brand thermometer, because that was all I could afford. I still have that one and use it quite often. Since I have both, I can attest that they are equal in actually reading temps, and speed in doing so. Of course an item's worth is subjective, but I am in full agreement with you on becoming a better cook. When you start cooking to temps, the finished product is much more consistent!
-
Day 12
No use today. Don't forget to set your clocks forward tonight.
-
@GA1dad said:
They are certainly the standard amongst the professionals, but I have a hard time with their pricing. Mine was gifted to me by my BBQ mentor when I placed right behind him in my first cookoff. For that event I used a $9.00 Walmart store brand thermometer, because that was all I could afford. I still have that one and use it quite often. Since I have both, I can attest that they are equal in actually reading temps, and speed in doing so. Of course an item's worth is subjective, but I am in full agreement with you on becoming a better cook. When you start cooking to temps, the finished product is much more consistent!
My first one was gifted to me too. At first I didn’t use it much because I thought it was a bit of an extravagance…but I too found out about the consistency and control…far less memorization and guessing involved cooking meats of different thicknesses or requested temps.I only bought a new one recently because the original one is well over 12 years old and it isn’t splash proof anymore…because I wasn’t the only one using it. Original still works, but gotta be careful cleaning it.
My experience with some cheaper thermometers was really bad. Not for accuracy, but time to read. Tested a couple directly against the Thermapen and they were just way too slow.
@Alan K. said:
Day 12
No use today. Don't forget to set your clocks forward tonight.Just did ours…no SAK action needed for that. It’s a pain to do the watches that keep pretty good time. I wish we’d ditch DST.
-
Challenge of Champions Day 13
No uses so far today. The day has been focused on cookoff prep, which included making small wood chunks out of big wood chunks.
.jpg)
-
Yes and no. I'm basically a one man team, so I get to do it all. Show up on Friday, set up, unload, prep food, cook food overnight, turn in entry on Saturday morning, wash dishes and load back up,,,,, all on the sleep you last had on Thursday. Depending on the venue and distance from home, I will often have help from my wife and daughter. Friends like to come and hang out, but friends are hard to find when it's time to pay entry fee's.
The BBQ world ( at least in South Carolina ) is indeed a fun family group though. It's great when you get called on stage and receive a check. It's a terribly long ride home when you don't. We have one event we cook every year that is close to a Dairy Queen. Depending on the results we either go for a celebratory Blizzard,,, or a pity-party Blizzard. I have been on the stage for 35% of the event's I've competed in,,, which I think is pretty good when you figure I'm competing against multiple state champions at these events.
-
<u>Day 12</u>****
No pics from yesterday because I was so busy helping my local robotics team, but the Champion got a brisk workout. I used the metal saw for the first time ever!The robot’s new ball-shooter that we had just assembled had some 1/8” aluminum pieces that needed to be cut off, but the assembly was too big to fit the band saw and the pieces were awkwardly located for a hacksaw. So I whipped out the Champion and went to work with the metal saw. I’m honestly very impressed by its performance at cutting aluminum.

-
35% sounds good to me. If you get closer to 100% it’s like time to go pro or go get another hobby.
@Farmer X said:
Me, too. Microwave, coffee maker, wall clocks, G-SHOCK, car radio...anything else I need to advance?
Great photos and uses, y'awl!
Still got one more to do that needs a ladder. More of a Monday job.
@GA1dad said:
Agreed! I lived in Arizona for five years and it was so nice not having to reset twice a year.AZ and HI. Two states I know of that don’t go this nonsense. Didn’t sleep much last night and compounded with DST, well…could feel better.
-
@hsherzfeld said:
<u>Day 12</u>****
No pics from yesterday because I was so busy helping my local robotics team, but the Champion got a brisk workout. I used the metal saw for the first time ever!The robot’s new ball-shooter that we had just assembled had some 1/8” aluminum pieces that needed to be cut off, but the assembly was too big to fit the band saw and the pieces were awkwardly located for a hacksaw. So I whipped out the Champion and went to work with the metal saw. I’m honestly very impressed by its performance at cutting aluminum.
Great use!
This is exactly when larger SAKs shine. 
Aluminum is easy-peasy for these. Did a quick test on Titanium sheet and actually it did cut…but not willing to kill a saw just yet to find out how long it’ll last.
-
**<u> kamakiri - Day 13 </u> **
Changed to a 146fmaU Champion B knife with TGS 1,000,000 inlayed for Day 13. No uses so far…no mail and not feeling great.
I’m hesitating to publish my date estimate for this one. Mostly because it’s a bit of a crapshoot as I’ve found parts from several years on it and as I’ve said before that advertising knives can get old parts…but I believe this one takes the cake, with parts that span up to 6, maybe 7 years. Obviously, then produced some time after the very latest part.
Pictured with a mini-me version in 58mm.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
**


-
I made the round of the clocks last night, too. At least it's easier to move the hands forward an hour in Spring, than back in the Fall.
Though it seems like with each time change I find myself wondering "Do we really need that clock also?"
Hope you're feeling better soon, kamakiri.
Day 13:
OK, this is an odd use...I noticed that there was a bunch of unknown crud wedged between two boards on the stairs down to the deck. So out comes the all-purpose scaler on the '83 and cleaned it all out. The scaler is great for poking and prodding, as well as flipping steaks. :)

-
@kamakiri said:
Great use!
This is exactly when larger SAKs shine. 
Aluminum is easy-peasy for these. Did a quick test on Titanium sheet and actually it did cut…but not willing to kill a saw just yet to find out how long it’ll last.
Thanks! In all honesty, I had really underestimated the metal saw; I thought it was just the edge of the file (like every file has) and that Victorinox had chosen to call it a separate tool just to up the tool count. After all, Leatherman Wave files have a similar pattern of teeth on their edge, yet Leatherman doesn't call this edge a metal saw.
But it really works, and in my case I think it worked better and faster than a hacksaw would have (certainly better than the dull hacksaw that has been abused by high school students that we had access to yesterday).
I also used my Pioneer's awl to ream out holes in 3D-printed components for the robot. I would have used the Champion's awl, but the holes were too large and as we all know, the Pioneer awl is far superior to the 91mm awl at reaming and drilling. One of the students remarked "that's a weird-looking knife", which gave me a chance to teach him about that wonderfully simple tool known as the awl.
-
^Awesome! Another Metal Saw fan is born!

Best part about challenges…finding the new uses.
-
DAY 13 The Champ went shooting today.

-
Day 13
Technician's screwdriver took care of a (really ugly) outlet plate at the neighbor's. One of the opener drivers would probably have been better, but it was an easy enough way to get the use in.
<u>Tools Used
</u>Technician's Screwdriver- Outlet plate
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can opener- Bottle(!) opener<u>Tools Remaining</u>
Tweezers, Pin, Keyring, Metal File, Metal Saw, Nail Cleaner, Wood Saw, Bottle Opener, Flat Driver, Wire Stripper, Small Phillips, Reamer, Chisel
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login