The Challenge of Champions in 2022!
-
I like my scalp where it is! :o
-
It’s not as dangerous as it sounds. As long as your hair is thick enough (like mine—I need to get a haircut soon), the saw teeth are too short to reach through the hair to scratch the scalp.
I’ve also combed my hair with a Leatherman Wave saw before, so I knew how to do it safely.
The saw is not an ideal comb, obviously; because the teeth are so short, they will only comb the top layer of hair.
-
@BPRoberts said:
Here's a picture with my cat, Pumpkin.
Do you prefer rubbing alcohol or Zippo juice for removing that residue? I just use whatever's closer!
-
DAY 15 We ate lunch at a picnic pavilion, but I forgot to take a pic.
So it's back home to open a box. ::)
-
@Farmer X said:
Do you prefer rubbing alcohol or Zippo juice for removing that residue? I just use whatever's closer!I discovered rubbing alcohol for de-gunking last year and have been using it since then. I've got 70% isopropyl.
Someone had told me once that WD-40 works, but I never had much luck with it.
-
**Day 15
**
No uses today so settling for a glamour shot in the sun.I think I mentioned before that this is my only SAK with translucent blue scales and I wasn't sure about them at first. I bought this particular SAK as I wanted a Champion Plus with the original magnifier. I figured I could always swap out the scales. But they're growing on me! They do look good in the sunlight.

-
Challenge of Champions Day 15
Today was particularly rough on my fingernails. Had to take the time to clean them up and reshape them.
Champion C
1- Large blade **check ** 13- Small blade check
2- Corkscrew check 14- Can opener check
3- Small screwdriver check 15- Cap lifter
4- Screwdriver check 16- Wire stripper
5- Reamer check 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger check 20- Ruler check
9- Nail file **check ** 21- Metal file check
10- Nail cleaner **check ** 22- Metal saw
11- Fine screwdriver 23- Keyring check
12- Tweezers check 24- Toothpick check.jpg)
-
@hsherzfeld said:
<u>Day 15</u>
I used the wood saw today… to comb my hair! I forgot my comb and I noticed my hair was pretty messy when I got to work. At first I tried using the fish scaler, but it’s teeth were too thick and blunt. So I very carefully tried the wood saw. It actually worked! It helps that my hair is pretty thick, and I had to use very little pressure, otherwise I would’ve plowed furrows into my scalp!I think moving forward I will refer to you as,,,,,,,,,,,,,,,,, Sir

-
Day 15
Used the MOST IMPORTANT TOOL ALL MULTITOOLS MUST HAVE to open a beer during dinner. Also used the nail cleaner. I think I like the smaller/pointier ones on the Cadet, Classic, Executive, etc. more.
Tools Used
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nailsTools Remaining
Tweezers, Pin, Keyring, Metal File, Metal Saw, Wood Saw, Flat Driver, Wire Stripper, Small Phillips, Reamer, Technician's Screwdriver, Chisel
-
**<u> kamakiri - Day 15 </u> **
Changed to my oldest Champion for Day 14. Just the mail opening for use. It’s from about mid-‘50s. Well after the U.S.PAT.PEND COs we’re used into ‘53.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
**

-
I like my post '91 Champion, but I do envy you those bailers.

-
@Farmer X said:
And I hear you on using WD-40 to remove tape residue...too messy and a lingering odor.

@Fireman said:
Yeah, he's off the manliness scale with that use.
It's like a human Furminator, only sharper.
@Alan K. said:
I like my post '91 Champion, but I do envy you those bailers.

Thanks! …but there’s nothing to envy about those fallen down the rabbit hole!
-
I'm in starting April, (for a full month's carry) <u>IF</u> the Mini Champ is elelagable. I'll be carrying it anyway, so why not? 😷👍
-
**<u> kamakiri - Day 16 </u> **
Changed to a 1963 Champion B for Day 16. Just conquering the mail so far.
This one is 1963 because it’s missing all the changes that start showing up in the ‘63-‘65 range. Almost every single tool goes through some sort of easily identifiable change through this period. Changes against the earlier ‘61-‘62 knives requires a bit more finesse in analyzing what I’m now calling progression type details. It also compares very well to other knives that can be precisely pegged to 1963 with inlaid and engraved dates.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
**




-
@hsherzfeld said:
I’m not a fan of having a bail on a knife I’m actually using, but the bail and exposed pins add a nice aesthetic to those vintage SAKs.

On both points. In use, it only gets in the way for me. Gotta flip it back n forth depending on the tools you’re using. And lots of the ones I have show very clear signs of a previous owner closing the main blade on them! I love the way they look, but don’t ever wish they’d come back for regular production.
-
DAY 16 I tried the hsherzfeld method of coming the longer part of my beard. I can't say it did a good job, but I didn't rip my lips off. That concludes my testing. Selfies while waving a saw near my face would probably go viral, but I tapped out and took one of the Champ with a more appropriate saw target.

-

I wasn’t recommending using the saw as a comb. I only said that it’s *possible. *
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login