The Challenge of Champions in 2022!
-
@afishhunter said:
I'm in starting April, (for a full month's carry) <u>IF</u> the Mini Champ is elelagable. I'll be carrying it anyway, so why not? š·šHello, afishhunter!
The Challenge of Champions is just for the month of March. We started back on the 1st and end on the 30th. It's open to the Champion and Champion Plus models.
There was a challenge for 58mm SAKs last year so you might keep an eye open for another one.

-
<u>Day 16</u>
No use today, so hereās a shot of my Champion against my office whiteboard.
-
Day 16
Small blade used to sharpen a pencil.
-
<u>Day 17</u>****
Happy St. Patrickās Day!I made myself a shamrock with the scissors.

-
@hsherzfeld said:
<u>Day 17</u>****
Happy St. Patrickās Day!I made myself a shamrock with the scissors.
Nice! I guess you didnāt wanna get pinched today! Im wearing a Grogu shirtā¦because I donāt have a green Champion. :ahhh
Happy St. Paddyās!
-
DAY 17 We went to a park to eat lunch. The sub was uncut, so I chopped it with the Champ.


-
**<u> kamakiri - Day 17 </u> **
Happy St. Paddyās Day! Changed to a 1973 Hoffritz Champion B for Day 17. No uses so far. Pictured with some of my favorite greenies for today.
Todayās Hoffritz Champion B sports the rare first ruler on the s.caler as shown in the close up. This one is likely produced just before, if not parallel to the first Champion Cs. The main line knives with these rulers appear to be just a tick earlier in production.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ā09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-ā50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
**



-
Day 17
The saw cut through a palm frond like butter.
-
Challenge of Champions Day 17
Not much happened in my world today,,, no uses even at work.
.jpg)
-
**Day 17
**
Used the small slotted driver to pop out stubborn dead batteries from a flashlight.No green SAKs for me today as my only green one is a Swiss Champ, so not allowed this month. :(
Happy St. Pat's Day!

-
Day 17
I read that some people like to sharpen their tweezers down to a point, so I used the metal file and one of my spare pairs. I haven't needed the tweezers yet this month (surprisingly) so we'll see if/when it pays off.
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening<u>Tools Remaining</u>
Tweezers, Pin, Keyring, Metal Saw, Wood Saw, Flat Driver, Wire Stripper, Small Phillips, Sewing Eye, Chisel
-
@BPRoberts said:
I read that some people like to sharpen their tweezers down to a point.I've been meaning to try that. Luckily I have a few sets of tweezers that could go, and ample replacements.
-
<u>Day 17, Supplemental</u>
I used the metal saw again at robotics last night. We needed to remove a locking collar (similar to that shown below) from a hex shaft, but the head of the set screw that tightens the collar was stripped, so we couldnāt loosen the collar to remove it.Luckily, the collar was aluminum, so I sawed through it until it was weakened enough to pound off with a āuniversal problem solverā.

-
@hsherzfeld said:
<u>Day 17, Supplemental</u>
with a āuniversal problem solverā.Also known as a āBirmingham Toolkitā round these parts!

-
DAY 18 I brushed my hand against some plant and had very small, thin needles in the side of my hand. Tweezers and using the blade as a scraper got them all out (I think), but sharpening the tweezers to a point would be better. No pic of thorn removal due to lack of sufficient hands or an assistant.

-
**<u> kamakiri - Day 18 </u> **
Changed to a 1966 Horn Scaled Champion B 146fmaU H for Day 18. Only opened a couple of packages that came in today.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ā09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-ā50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
**

-
the clip point blade! So uh, Kamakiri, you know this is the Challenge of Champions right? The 30 SAKs for 30 days is a whole other challenge. ::)
I'm just kidding my brother. I can't wait to see what you bring out next.
-
@Alan K. said:
the clip point blade! So uh, Kamakiri, you know this is the Challenge of Champions right? The 30 SAKs for 30 days is a whole other challenge. ::)
I'm just kidding my brother. I can't wait to see what you bring out next.

Thanks Alan K., I just had to do something at least a bit different! Also giving me a
reasonexcuse to dig around in my collection a bitā¦maybe get some ideas for reorganization. Canāt find this ā58 I was comparing to just before the challenge startedā¦looked for it on at least 3 separate days and no luck so far. I figure thatās better than doing something like pulling out a couple other ā74sā¦or the other two A&Fā¦or many more of the misc Hoffritz Super Knives from ā75 to ā91ā¦I really shouldāve planned better! Lol. There are better candidatesā¦if I can find them in time!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login