Wave+ ruler problem?
-
Hello all.
Brand new here; I just got a Wave+ yesterday and I’m a little non-plussed to see that the ruler is off, in that the secondary handle scale is out by >1mm on the metric side.
Wave+ owners, Is this a common issue? Is your own tool’s metric ruler correct, or wrong? (If you read straight across from 6”, what metric value are you getting on your scale?)
I’d really appreciate people’s input - I don’t want the hassle of a return if the next one is going to have the same fault, but equally I don’t want to put up with a faulty tool if samples are generally of correct spec.
Many thanks for you help :)
-
Welcome, Evaw, to

Measuring between** tips**, mine gives me exactly 8"/20.3cm; maybe re check measurement before sending it in? Anyway, good luck!
edit- (Sorry for the crappy phone pictures,
)[attach id=0 msg=2327110] [attach id=1 msg=2327110] [attach id=2 msg=2327110]



-
Thanks Juan!
The dimensions of mine are also 8” end-to-end, laid out per your pics.
But a slight update: checking more carefully, the sae scale on mine looks okay, but the metric is definitely out.
An easy check: 6” is 15.24cm. But if I read straight across on mine, the LM scale shows 6” is 15.35cm.
So to boil down the question for everyone: **If you read across from the 6” mark on your Wave+, what does your metric scale show?
**Thanks again!
[attach id=0 msg=2327111]

-
Welcomw to MTO Evaw

Here are some measurements of mine...
15,24 Charge TTi (2021)
15,24 Wave (2017)
15,29 Wave BO (2017)Measuring from the outer edge to the 15cm mark it appears that the cm scale on my BO Wave is off by around a half mm.
So there seems to be a difference sometimes.
I guess the handles get formed/bent after the scales are stamped in, which might introduce some tolerances. -
Thanks - looks like all yours are good 👍
-
-
Welcome to
Evaw 
I would only use it to reference things and not as a defacto ruler
like any MT there are going to be drawbacks
Sorry to hear that the tolerances are off that much though :ahhh If you have to have it exact, I do recommend trying to send it in but you may end up with something the same unfortunately 
Hope you do get it sorted to your liking though

-
Thanks Poncho - yes, the reason for asking here is to work out whether I can expect an accurate one or not if I reject this one.
It does seem extraordinary that tolerances can be so far off on a ruler scale….
-
because a ruler should definitely always be correct
I rarely if ever use mine and have never thought to check to see how accurate it is across the whole tool, I do occasionally use it to gauge smaller things but never nothing that is larger than 1 of the handles 
-
Sorry that I misunderstood the question, Evaw; just checked my Wave+ (2020) and indeed, it reads 6"= 15.3cm. My 2nd. Gen. Wave's the same (2017).
[attach id=0 msg=2327244]I'd guess then that they're all like that. Hadn't noticed the incongruency before, as I only seldom use the scales, and for mostly "approximations",
Hope you can get it sorted out to your liking.


-
Thanks Juan, that’s super helpful. Yours and mine look pretty similar then - I might just need to live with it :)
Anyone else out there got a Wave + with an accurate metric ruler? :o
-
Anyone else able to chip in at all?
Thank you!
-
Sorry, no Wave+ here.
-
I talked to the (online) retailer yesterday. They couldn’t have been more helpful - measured a few examples from inventory and, once we saw that they had better ones on hand, sent me a paid return label for exchange. Happy with that :)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đź’—
Register Login
