Buck knives owners club.
-
Thanks a lot TG and Nate

-
@McStitchy said:
Thanks a lot TG and Nate
You're welcome Mac.
-
@toolguy said:
You're certainly welcome Nate.Don't forget to post pictures of your new Bucks knives as they come rolling in.LOL
Picked up the 110 Hunter Sport. Here it is with the 110 Pro and 110 Slim Pro.
Overall, I give the concept an “A”, and the execution a “B”.
I really like the concept of a 110 that is lighter-weight but still hand-filling. I strongly approve of the choice to use S30V instead of 420HC, and OHO is a nice touch IMO.
I think the choice of smooth OD green micarta is less than ideal though. I would have preferred G10 with just a little texture, like the Pro or Slim Pro. And how about giving us a color that would stand out if we drop it in the woods, like blaze orange, bright red, or neon blue? Instead, we get a knife that is basically camouflaged.

The pocket clip is a nice addition. It is definitely a step up over the Slim Pro pocket clip, but there is room for further improvement. It does let the knife ride nice and deep in the pocket, as shown below. And, if pocket clips aren’t your thing, it is easily removable. Some reviewers have complained that, when the pocket clip is removed and the screws replaced, the screws don’t sit flush with the bolster. This seems a little nitpicking to me, but also a criticism that could have easily been avoided by Buck.
I’m planning to give this knife some carry time, so we’ll see how it does.



-
Cool nate I’ve been looking at them, good to get a comparison

-
Little snowy today :D had out the 110 slim, wasn't a fan at first but it's starting to grow on me


-
@Spartan19 said:
Little snowy today :D had out the 110 slim, wasn't a fan at first but it's starting to grow on me
Nice.
I think the Slim series are a bit under-appreciated. 3 3/4” blade in a usable package that only weighs about 3 ounces is no mean feat.
I also really like that they offer both budget models at very reasonable prices and higher end models with upgraded materials. I wish more knife companies would do this, and that Buck would do this with more models. A 301 Stockman with S30V steel, G10, and NS pins and bolsters would be great.
I have a 110 Slim Pro that I carried quite a bit, though it has been recently replaced in the rotation by the 110 Hunter Sport.
Great color choice with the orange as well!
-
@nate j said:
I also really like that they offer both budget models at very reasonable prices and higher end models with upgraded materials. I wish more knife companies would do this, and that Buck would do this with more models.
I have a Buck 112 in orange GFN. For less than $30, I feel it's an incredible value. I'll post some pictures of it herein when I get a chance. -
I have lived almost 53 years without ever having a desire to own a Buck 110 or 112. I read 2 threads on this forum in the past 2 days, and I start thinking "How have I managed to go so long without a Buck?".

-
@Adam5 said:
I have lived almost 53 years without ever having a desire to own a Buck 110 or 112. I read 2 threads on this forum in the past 2 days, and I start thinking "How have I managed to go so long without a Buck?".
It’s certainly possible to get by without one. The question is, “Why would you want to?”

-
So I'm consdiering participating in the Fools of April challenge and already have a trusty old 110, but of course looking for a variety is our nature. I found the slim that was pleasantly cheap, but how is it? Does it feel cheap?
And does anyone know any variants that are on the reasonable end of price and available in the UK?
-
I can't help with a UK source for Bucks, but I do have a 112 Slim Ranger. I imagine it's very similar to the 110. While it doesn't feature premium materials, it is very well-made: good fit and finish, smooth action, tight lock-up, and a great edge from the factory. A Buck 110 slim would be a very worthwhile pick-up, in my opinion.
-
@DavisNikolov said:
Love Buck knives, some of my first folding knives were knock-offs of the 110. Back then I didn't really know of the real deal, I liked the design but wished they were higher quality. When I first found the knife forums and learned a thing or two I decided I want a Buck 110. Easier said than done, back then they weren't widely available in our corner of the world. So I got a 112 from a local forum's "for sale" posts. Few months later an 110 came up so I snatched it too. Then I started buying them from abroad, some even imported from The States. Here is a family photo, excuse the poor quality - low light + cell phone..
@DavisNikolov said:
Thank you ! Far from done with that particular section of my collection because I seem to like most of the stuff Buck makes. Next one probably will be a 55 :)Buck knives seem to find their way into my life. Since I last posted in this tread I got 3 more. And yes, the "next one" was a 55. This thing is smaller than I expected. I didn't really read the measurements on the website so I'm the only one to blame. I just imagined the "half one ten" a bit bigger :D Anyway, this thing got wickedly sharp, put it in the watch pocket and carried it around for weeks. Used it as a dedicated apple peeler/ slicer. I eat 1-2 apples each day and use a knife for that - partly because I enjoy it ant partly because I h8 dealing with things stuck in my teeth. It worked great BUT - the scales are so thin that from the daily washing after the apple the wood curved and opened cracks between the scale and the brass.
Clamped it and left it for a week. It dried and returned to normal. I dipped the whole thing in boiled linseed oil few times and left it dry. Hopefully it's more water resistant now, haven't really tested it out yet because I am not sure that if the scales curve again they will settle back as good as they were.Then a beautiful 1994 Buck 192 Vanguard. The wood of the bit older bucks is so much better looking to me. Haven't gotten the chance to carry that one yet. Partly because I have only once gotten out in the woods this year so far. And partly because I got it without a sheath and need to make one. Used it on some pork for cooking though, worked as one might imagine - awesome :)
And the most recent is an 841. A knife that I wouldn't get myself as it just did't seem great on pictures and videos. A friend got it for me and now that I have it - I love it. It has all the modern and flashy attributes - micarta, flipper, ball bearings, clip, premium steel. And somehow it still looks kind of classic to me. Heck, I'm not even mad at the file work on the back, I usually don't like those. It's light, don't feel it clipped in the pocket but yet gives a powerful edge. If the clip could have been a bit less protruded when held in hand and the handle could have been juts a tad longer - it would have been just about perfect for me. But those are just nitpicking - the knife is awesome :D


-
Very nice Bucks Davis

I don't own any smaller ones with wood scales and now might avoid that actually ;)I've got micarta on my Squire...

-
Verah nice Bucks Davis and Matt!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


