The Challenge of Champions in 2022!
-
Day 19
Went to REI to stock up on gear for the summer. Mostly camping, but a bit of biking stuff as well. Looked at multitools for a bit, was hoping to pick up a Farmer X, but they didn't have one. Hook made carrying the bag much easier, especially since we had to park in just about the furthest spot in the lot.
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening<u>Tools Remaining
</u>Tweezers, Pin, Keyring, Metal Saw, Wood Saw, Flat Driver, Wire Stripper, Small Phillips, Sewing Eye, Chisel
-
<u>Day 19</u>
Not much today; I trimmed some flowers with the scissors.
-
@hsherzfeld said:
<u>Day 19</u>
Not much today; I trimmed some flowers with the scissors.Looking good!

-
DAY 20 Cactus roses are blooming.

-
Day 20
Made a para-lanyard while watching The Mummy this afternoon. Scissors and small blade on the assist, and attached to the key ring.
Tools Used
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening
Key Ring- Lanyard attachmentTools Remaining
Tweezers, Pin, Metal Saw, Wood Saw, Flat Driver, Wire Stripper, Small Phillips, Sewing Eye, Chisel
-
Challenge of Champions Day 20
Not much going on today. Unloaded the truck and trailer. Washed pans and such. Nothing required the assistance of the Champion today.
.jpg)
-
Day 20
Another quiet day today. No uses again. But maybe quiet is a good thing?

-
Day 20
A Champion with a companion.
-
**<u> kamakiri - Day 20 </u> **
Changed to a 1958 Champion B 146fmaU for Day 20. Picking a co-Champion for the day, because I thought that this duo was worth featuring together instead of on consecutive days. The second knife is a 1960 Champion A 246fmaU sporting the rarer Corkscrew (at least in the States).
No big uses for either as I didn’t make much time for knife and hobby time today. But both of these knives proved the mettle of their metal and showing they can each cut grade 5 titanium, even if just a bit, mostly for show.* Just a couple of starter notches in a piece of 3mm stock I’m going to use for scales and some other covert squirrel doodads.
*Note: No saws were hurt and no teeth were lost during this demonstration. Do not do this at home. kamakiri is a trained and slightly crazed individual.
Hidden rivets and a whole bunch of changes are typical of these knives that immediately follow the last main line 91mm cellidor scales knives with exposed rivets.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
- 1975 Hoffritz Champion C - 11258 Super Knife with clip point
- 1958 Champion B 146fmaU & 1960 Champion A 246fmaU
**



-
<u>Day 20</u>
I used the main blade to open a bag of potting soil yesterday, but I couldn’t take a photo at the time (I was wearing dirty gardening gloves). So here’s a glamor shot of most of the tools I’ve used so far during the Challenge.
-
DAY 21 I opened a Clif bar, but this was a better photo op.

-
**<u> kamakiri - Day 21 </u> **
Changed to a 1973 Champion A 246fmaU for Day 21. No uses so far today…but missing some of my other EDC cohorts lately…mostly the SBX and the Troubleshooters.
This one is a pretty rare Champion A, and perhaps one of the last batch. It sports the more common 2nd font of ruler and was produced earlier in the year from the first Champion Cs which got the new magnifier and Phillips layer, as well as the first nail cleaner tipped metal saw. So there may be another, perhaps even more variants out there for some of us crazies to find…if putting forth the effort to search for such rare oddities.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
- 1975 Hoffritz Champion C - 11258 Super Knife with clip point
- 1958 Champion B 146fmaU & 1960 Champion A 246fmaU
- 1973 Champion A 246fmaU w/ 2nd ruler
**


-
Challenge of Champions Day 20
Today I used the fine screwdriver for a bit of wire termination in a panel.
Champion C
1- Large blade **check ** 13- Small blade check
2- Corkscrew check 14- Can opener check
3- Small screwdriver check 15- Cap lifter
4- Screwdriver check 16- Wire stripper
5- Reamer check 17- Scissors check
6- Phillips screwdriver 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger check 20- Ruler check
9- Nail file **check ** 21- Metal file check
10- Nail cleaner **check ** 22- Metal saw
11- Fine screwdriver check 23- Keyring check
12- Tweezers check 24- Toothpick check.jpg)
-
Day 21
Fixed a loose screw on a spinner for a coworker. Tried the can opener Phillips first, then switched to the inline. Forgot how much easier the inline is.
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening
Key Ring- Lanyard attachment
Small Phillips- Spinner tighteningTools Remaining
Tweezers, Pin, Metal Saw, Wood Saw, Flat Driver, Wire Stripper, Sewing Eye, Chisel
-
Day 21
No use today.
-
@kamakiri said:
**<u> kamakiri - Day 20 </u> **Changed to a 1958 Champion B 146fmaU for Day 20. Picking a co-Champion for the day, because I thought that this duo was worth featuring together instead of on consecutive days. The second knife is a 1960 Champion A 246fmaU sporting the rarer Corkscrew (at least in the States).
By "rarer" corkscrew, do you mean the grooved, 5-turn design? I have that on my '63 Champion A as well.
I wonder why Victorinox redesigned it?
-
Day 21
I never think about the 90 degree stop on the bottle opener until I use my '83 that doesn't have it. Then I find myself trying to "balance" it at 90, usually with not a lot of success.
My '63 doesn't have the stop either, but I rarely use that SAK. It's earned a good retirement from active use.

-
<u>Day 21</u>
I switched to my second Champion with the glass magnifying lens to read some very small text on an engineering drawing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login