Electrician's MTs
-
@Syncop8r said:
Tough choice then.
They would see most use on instrument cables (I need to re-solder some plugs).
I don't like wire strippers where you have to pull; it's hard to not pull the inner core out.
I have my eyes on some cheap grabby ones...The strippers you show just do the pulling for you and not as smoothly or as controlled as you can do yourself either.
I strip small cable every day and I am telling you that the best strippers are those with the correct size opening for your cable and that are really sharp and so NEVER used for anything else!
I find the Ideal ReFlex Strippers to easily be the best and better than Klein which are more made for Electrical work than Signal Cable work overall.
Then you need to learn to use the tool with your hand and other hands thumb controlling the pull so that you do not get any tearout as you suggest.
It is not hard but just requires a little practice like any other learned skill.So instead of using the tool to just cut insulation and then just yanking you use the tool around the cable and your other hands thumb like a lever point to gently and with control slide the insulation off of the conductor.
You can easily do this all the way through the shield and individual conductors if you can just visualize the process as you strip and try not to rush.
I know it is easy for me to say but once you learn this you should be able to easily strip any cable without tearing through anything!
-
Are there any other spring-loaded ones?
-
Here is an update to my collection of electrician's MTs and knives. I will see about getting my multipurpose pliers together and taking a group photo of them also.
Squirt E4/ES4:

Gerber Groundbreaker:


Various MTs:
(Bear Jaws 155EL, Klein hybrid plier MT, Klein TripSaver, King Innovation I-Tool, Commercial Electric 7-in-1 MT, Crescent Toolzall Electrician MT, CAT 14-in-1, Amazon Basic, ProTool Wire Stripper/Utility Knife, Performance Tool (same as Amazon Basic)

Medium Electrician's MT:
(Urrea, PowerPhase, Southwire, Westward, HyperTough, Klutch, Commercial Electric, RS Pro)

Knives:
(Victorinox Red Alox Electrician from Sococut, SOG TL-29,
Camilius TL-29, Klein TL-29, Southwire Edgeforce Sheepsfoot, Klein electrician's knife, Soviet Union era factory knife, SOG Kilowatt)


-
Wow! :o That is an awesome collection of Electrical tools, Adam :ahhh

-
Thank you, kind sir

-
Nice collection! I have a few of those Camillus 27s (plus a very old Robeson), and hopefully have a Squirt ES4 on the way.
-
Thanks!
And great! I am glad about the ES4. I was going to surprise you with one if I could. Now, I'll just have to surprise you with something else :D

-
Nice collection Adam!

-
Fantastic collection! I'll get yhe Edgeforce sheepfold when they restock. It's been out of stock for ages.
-
Interesting collection!

-
I have added a few more items to the collection:

Before long I will need to rent space on Mrs. Poncho's table to display my collection :D
Here is one additional item, a NIP PT-525:

-
That is an excellent themed collection and some great tools. Very nice, Adam!

-
Thank you, nakken

-
Seeing this topic got me a bit excited, hoping the ultimate El.tech. MT would be revealed inside..
Guess I should have known better, but great topic and thread, nonetheless.90% of what I need a MT for on a daily basis, is ad-hoc electronics/electrical work. 50+% of the time I have good, or even dedicated tools available within a couple of meters, so it's mostly a convenience thing. Some times a small convenience that saves me a minute or two, but some times a big convenience that saves me tens of minutes. The biggest thing is probably that I avoid the interruption and can keep my focus and flow. The actual walking across the room or even back to my office to get a tool, isn't the real issue.
The Squirt ES is the only "electrician" specific MT I have. For the few things I have to solve on the fly, that wasn't quite planned, this MT could have worked on paper, but it suffers from bad execution and ends up being pretty useless as booth a stripping tool and pliers. I haven't tried the PS version, but based on my experience with the Style PS, I assume the Squirt PS is at least a decent plier for its size.
Most days I just carry a slightly modified Cadet, where the can opener is ground down to a long(er) reaching 3mm flat head/slotted. It leaves me plier-less for my in-pocket-EDC, but it seems like having the drivers available on the Cadet solves most small surprises. The modified 3mm slotted driver fits perfectly in most screw down terminal blocks, the file takes care of small to medium sized Phillips and Pozidriv screws and the large slotted fits a range of cabinet access screws and does a fair job at prying. I hardly ever use the knife blade, but living in society that's ever less knife friendly and tolerant, the SAK blade isn't totally redundant.
Here's from a little maintenance job I did at home a couple weeks ago, changing the battery in one of my motion sensors and replacing the adhesive tape with a better quality one from 3M. Not the most demanding stuff, but goes to show how little you need to get basic stuff done, and how much of "that little stuff" you find in the Cadet:





The mod'ed Cadet and the rest of my typical in-pocket-EDC

I did stumble across these on my last visit to one of my tool suppliers, not sure why I haven't noticed them before, but seems like a good electricians multitool for light el. work. Strips the most common sizes I work with, precision pliers, side cutters and even ferrule crimpers. Not small enough to justify 24/7 carry for me, but handy enough to throw in the pocket for when I expect to need it:

-
Awesome collection, Adam

She doesn't even want my collection there, so you might have a hard time convincing her :ahhh :ahhh :ahhh :D
-
@aicolainen said:
Seeing this topic got me a bit excited, hoping the ultimate El.tech. MT would be revealed inside..
Guess I should have known better, but great topic and thread, nonetheless.Unfortunately, I can not personally recommend any of the multi-tools for full-time edc. None of them work well enough for me, though perhaps they work better for other people. However, I am a fan of many of the knives.
-
Terrific collection and a great theme for one.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
