The Challenge of Champions in 2022!
-
**<u> kamakiri - Day 23 </u> **
Changed to a 1980 Champion C for Day 23. Hung outside with me today. Used the main blade to gather roses and freesias for wifey. Light pruning n those and the callas. Fish scaler served as the stand-in weeding tool which are usually pliers in the Troubleshooters. Corkscrew untied the knot in the dinner delivery bag. Scaler also did oven rack pulling/pushing at lunch- also often pliers duty when I have them with me.
This one is early 1980, main line production. I wasn’t thinking too hard when I grabbed this one. I already used a 1980 knife when I used the black A&F. (The other two of those are ‘82 and ‘86? IIRC). Anyway, this one is early ‘80 because it (still) has a couple of parts from ‘79. Parts from a sub-group I call ‘Spartan parts’ and are the highest volume parts in the 91mm line.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
- 1975 Hoffritz Champion C - 11258 Super Knife with clip point
- 1958 Champion B 146fmaU & 1960 Champion A 246fmaU
- 1973 Champion A 246fmaU w/ 2nd ruler
- c. 1960 Champion B 146fmaU w no nick metal saw
- Early-1980 Champion C
**

-
DAY 24 I had to use the screwdriver to pry the cover over the charging port on my wife's phone.

-
Day 24
Champion with coffee
-
**<u> kamakiri - Day 24 </u> **
Changed to a 1976 Hoffritz Super Knife - Champion C for Day 24. Thus one was on the top of one of the bins and I needed to open the mail. A similar ‘77 is in the pic behind it.
There are a few Hoffritz knives with the stainless inlay and the clip point. This one is just after that and one of the first to get the drop point with the inlay.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
- 1975 Hoffritz Champion C - 11258 Super Knife with clip point
- 1958 Champion B 146fmaU & 1960 Champion A 246fmaU
- 1973 Champion A 246fmaU w/ 2nd ruler
- c. 1960 Champion B 146fmaU w no nick metal saw
- Early-1980 Champion C
- 1976 Hoffritz Champion C - 11258 Super Knife stainless inlay, no clip point
**

-
Challenge of Champions Day 24
Phillips screwdriver made the list!
Champion C
1- Large blade **check ** 13- Small blade check
2- Corkscrew check 14- Can opener check
3- Small screwdriver check 15- Cap lifter
4- Screwdriver check 16- Wire stripper check
5- Reamer check 17- Scissors check
6- Phillips screwdriver check 18- Magnifying glass check
7- Wood saw 19- Fish scaler check
8- Hook disgorger check 20- Ruler check
9- Nail file **check ** 21- Metal file check
10- Nail cleaner **check ** 22- Metal saw check
11- Fine screwdriver check 23- Keyring check
12- Tweezers check 24- Toothpick check.jpg)
-
I'm really digging the variety kamakiri! That's a lot of Champions!
Great pictures and uses posted by everyone!!!

-
<u>Day 24</u>
More lunch prep with the main blade today. I sliced some leftover pork loin.
-
Day 24
Derped and used the file tip on my keychain Executive instead of the Tech Screwdriver to tighten a loose screw on the back of a laptop today. Took a page out of Alan K.'s book and took the safety lock off a detergent bottle to use as a sharps bin. That let me cross the chisel off the list, which is one of the tools I was most worried about finding a use for.
Tools Used
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening
Key Ring- Lanyard attachment
Small Phillips- Spinner tightening
Flat Driver- Cap prying
Chisel- Bottle cap disassemblyTools Remaining
Tweezers, Pin, Metal Saw, Wood Saw, Wire Stripper, Sewing Eye

-
@GA1dad said:
I'm really digging the variety kamakiri! That's a lot of Champions!Great pictures and uses posted by everyone!!!

Thanks GA1dad! I figured there wouldn’t be much appreciation if I used all these main line ‘74s on 5 consecutive days. One was enough! :)I’m grateful the Challenge is making me dig around a bit. Always nice to see the creative uses…especially when tracking the number of tools used.


-
**Day 24
**
Always exciting to open a box from Amazon!We're already into the last week of the challenge! Thank you everyone for your photos and stories so far.

-
DAY 25 Used the scissors to open this coffee stick. Never tried the stuff before, and I was trying to find out how bad it would be cold (for the GSMRE Challenge).

-
Challenge of Champions Day 25
No uses today
.jpg)
-
**Day 25
**
I think this is the first time I've used the scissors during the challenge. Had to cut some packing tape.
-
Day 25
Used the awl to open a package so as not to gum up one of the other blades.
-
**<u> kamakiri - Day 25 </u> **
Changed to a 1972 Champion A 246fmaU for Day 25. Only used it to help with a mod in progress so far. Used the metal saw to clean up some of the Dremel cuts on the main blade tang. Still gotta open the mail and packages. Won’t be a problem for this clip point still sporting the factory grind.
Typical of a ‘72 Champion A or B would be the lack of a +PAT can opener and ruler on the scaler. Otherwise, mainly fine ‘progressive’ details separate it from similar knives between mid-‘71 and early-‘73.
Spoiler:
There are a few easily observable changes that can be sorted with the details from other model knives which have very different construction protocols than the Champions do. Normally, because of the ‘complete’ tool loading of Champions, they are usually easier to separate production variants. Not really so in this specific ~2-year span. For this purpose, 5-layer knives are far better because of the difference in construction protocols and that there are so many more models to compare.
**Day of Challenge / Knife used:
- Original Black 1984
- Champion Plus c. ‘09
- 1974 Red w/o Nickel Silver Shield
- 1967 Hoffritz Champion B
- 1983 Hoffritz Champion C - 11258 Super Knife
- 1965 Hoffritz Champion B
- 1986 Champion C
- 1978 Champion C
- 1989 Champion C
- 1978 Hoffritz - Stainless inlay
- 1980 A&F black Champion 1 of 3
- 1969 146fmaU Champion B
- 146fmaU Champion B - TGS inlay
- 1989 Champion C - Credit Suisse inlay
- mid-‘50s 146fmaU Champion B
- 1963 146fmaU Champion B
- 1973 Hoffritz 146fmaU Champion B w/ 1st Ruler
- 1966 Champion B 146fmaU H
- 1975 Hoffritz Champion C - 11258 Super Knife with clip point
- 1958 Champion B 146fmaU & 1960 Champion A 246fmaU
- 1973 Champion A 246fmaU w/ 2nd ruler
- c. 1960 Champion B 146fmaU w no nick metal saw
- Early-1980 Champion C
- 1976 Hoffritz Champion C - 11258 Super Knife stainless inlay, no clip point
- 1972 Champion A 246fmaU no ruler, no +PAT
**

-
Day 25
Used the fish scaler to mix up the "growth medium" in my daughter's tiny planeter
<u>Tools Used
</u>
Magnifying Glass- Edge examination
Large Blade- Pear slicing
Pen- Note taking
Ruler- Car fob measurement
Small Blade- Open mail, slice rags
Fish Scaler- Disarm mouse trap
Scissors- Trim thread
Hook Disgorger- Back scratcher
Inline Phillips- Tub drain adjustment
Parcel Hook- Dress carrying
Toothpick- Tooth Pickin'
Eyeglass Driver- Glasses tightening
Corkscrew- Tea bag holder.
Can Opener- Bottle(!) opener
Bottle Opener- Opened beer
Nail Cleaner- Cleaned nails
Awl- Venting stock carton
Metal File- Tweezer sharpening
Key Ring- Lanyard attachment
Small Phillips- Spinner tightening
Flat Driver- Cap prying
Chisel- Bottle cap disassembly<u>Tools Remaining
</u>Tweezers, Pin, Metal Saw, Wood Saw, Wire Stripper, Sewing Eye
-
@BPRoberts said:
Day 25Used the fish scaler to mix up the "growth medium" in my daughter's tiny planeter
My wife has some of those tiny pots. She uses them for air plants.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
on both counts.
