Executive Lounge
-
@SteveP said:
:like:
Those are some great scales! Where did you find them?Shapeways, like the site. Has a lot of options for Leatherman and Victorinox. North C Utility is the maker. I am not affiliated with the maker or anything.
Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Fisher Space Pen Co. 9004536 with Ink Fine Pt. Universal Cartridge, Black https://www.amazon.com/dp/B001E2YB58/ref=cm_sw_r_cp_api_glt_i_4TKD1YPCPZ9TMWBKB16F?_encoding=UTF8&psc=1
-
@pa_strunk said:
Shapeways, like the site. Has a lot of options for Leatherman and Victorinox. North C Utility is the maker. I am not affiliated with the maker or anything.Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Fisher Space Pen Co. 9004536 with Ink Fine Pt. Universal Cartridge, Black https://www.amazon.com/dp/B001E2YB58/ref=cm_sw_r_cp_api_glt_i_4TKD1YPCPZ9TMWBKB16F?_encoding=UTF8&psc=1
I'm gonna have to check that place out. Thanks
-
@pa_strunk said:
Shapeways, like the site. Has a lot of options for Leatherman and Victorinox. North C Utility is the maker. I am not affiliated with the maker or anything.Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog
Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.
(www.shapeways.com)
Fisher Space Pen Co. 9004536 with Ink Fine Pt. Universal Cartridge, Black https://www.amazon.com/dp/B001E2YB58/ref=cm_sw_r_cp_api_glt_i_4TKD1YPCPZ9TMWBKB16F?_encoding=UTF8&psc=1
Thank you!
-
Your welcome, can also get those fisher space ink refills in blue and red ink.
-
I had never modded 74mm until now, decided I better give it a try while you can still find a few of them. Had to sacrifice a rally SAK for the combo tool and back spring off a donor that was part of a SAK lot I recently picked up on eBay. Phillips screwdriver this size is super useful to me for kids toys and whatnot. Happy with results so far.


-
I like that!! That's a perfect EDC

-
I always have a beaten Executive in my toiletries case, but just on Sunday I decided to EDC my good Executive in my Skinth Toolet, in a place where a folder or 1-3 layers SAK may also be carried.
BTW, has really anyone ever pealed an orange with it? Ever?

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Nice work pa_strunk!

@kkokkolis said:
BTW, has really anyone ever pealed an orange with it? Ever?Pretty much all of us doing the Chuck Yeager challenge!

-
@kkokkolis said:
BTW, has really anyone ever pealed an orange with it? Ever?You have to, if only to try it out.
Does have to be a large, proper orange, though and not a small satsuma or something. It works OK, does a great job of slicing down the sides... but you still need to peel those sides off, so you still end up with fingers all messy and stinking of orangey D-Limone, like you've just cleaned the thermal paste off a hundred CPUs!Of course, there's never just ***one ***use for *any *SAK tool... ;)
-
@kkokkolis said:
I always have a beaten Executive in my toiletries case, but just on Sunday I decided to EDC my good Executive in my Skinth Toolet, in a place where a folder or 1-3 layers SAK may also be carried.
**BTW, has really anyone ever pealed an orange with it? Ever? **

Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
I did! Didn't took any pics, but was very pleased with how it worked:
/post/2310355 -
-
Thanks guys, I'll try it for the first time (after many-many years owning 1-2 of these jewels)

-
I've peeled several just to try it....it really does work!!
-
Thanks for the comments guys. Think this knife is just perfect for EDC around the home or office. Also pairs great with any of the larger MT's that do not have scissors. Peeler does a surprising job on packaging tape. For my next project I am thinking about making a Spydernox version with some Wenger tools as well. Still in the planning phase for now.
-
One last thing, I forgot to say earlier. A nifty reason to have a Victorinox rambler or modify your executive like this is the super snug fit you get using the Leatherman bit adapter. Works great.


-
@pa_strunk said:
Thanks for the comments guys. Think this knife is just perfect for EDC around the home or office. Also pairs great with any of the larger MT's that do not have scissors. Peeler does a surprising job on packaging tape. For my next project I am thinking about making a Spydernox version with some Wenger tools as well. Still in the planning phase for now.Nice! Just remember:

-
@pa_strunk said:
I had never modded 74mm until now, decided I better give it a try while you can still find a few of them. Had to sacrifice a rally SAK for the combo tool and back spring off a donor that was part of a SAK lot I recently picked up on eBay. Phillips screwdriver this size is super useful to me for kids toys and whatnot. Happy with results so far.I don't know how I missed this earlier, but I love it!

I've always thought that an Exec with a combo tool would be nearly perfect.
I've got a generic hex bit coupler that fits on the 58mm combo tool (and the 91mm inline Phillips) pretty well. I like the coupler and limitless hex bit options way more than the few choices on the Cybertools.
-
A few of mine

3 favorites 14k Gold , Bronze Alox and a Blue A.S.S. :)

-
Nice ass, Jaydar!
But seriously, fantastic collection!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login